Need help with cooey model600

marlin1 · #1 06-27-2009, 03:17 PM

I am trying to remove the bolt on this old gun a older gentleman gave me to clean up. This gun needs the bolt removed so I can get the crud cleaned around the bolt .I cannot seem to remove the bolt.Its a tubular 10 round magazine that moves with the bolt and is attached somehow .I hope one of you gun guys can help. I've tried removing the magazine plug, pulling the trigger , no visible release pin ...HELP

Dick284 · #2 06-27-2009, 03:23 PM

You have to disassemble the rifle to get the bolt out.

It's been a while, and I'm not close to the 600 we have to walk you thru it.

Maybe tonight if someone else does'nt chime in.

marlin1 · #3 06-27-2009, 03:26 PM

Quote:

Originally Posted by Dick284

You have to disassemble the rifle to get the bolt out.

It's been a while, and I'm not close to the 600 we have to walk you thru it.

Maybe tonight if someone else does'nt chime in.

I did take the stock off and removed the plug from the mag but I can't see any way to seperate the bolt from the gun

sharrozap · #4 06-27-2009, 03:36 PM

http://www.outdoorsmenforum.ca/showt...ighlight=cooey
Maybe this old thread will help you.

Grizzly Adams · #5 06-27-2009, 06:09 PM

Simple.

Loosen off the bolt that holds the rifle into the stock. [There should be a lock nut there] The magazine tube should disengage from the bolt. Presto.
Grizz

marlin1 · #6 06-27-2009, 06:17 PM

Thank you very much Grizz , that did it . This may be the shortest thread I ever started