What's Your Favorite 280 Rem Load

[Cow Town Bill]

I'm trying out a new 280 Rem rifle. I started with 160 Sierra BT and 162 Hornady SST, both loaded with Reloder 22. Accuracy was so-so.
I have a hunch I should be trying lighter bullets but thought I would seek the experiences of fellow AO followers.
Bill

[Fowl91]

I've been getting fantastic results with 140gr TTSX and 57gr RL-22. Can't seem to upload pics, but it was shooting 5 shots into 1" at 100yds and 5 into the size of an iPhone at 600yds while doing my part. Might have to invest in a chronograph to check my velocity.

As another note, try the OCW method to test loads.
Here is the web address:

http://8541tactical.com/2014/05/05/m...er-test-redux/

[expmler]

140gr Sierra spritzers and H4350.

[ACKLEY ABE]

I've always had good success with 139 and 154 Hornady's in my 7's

[cowmanbob]

140 gr nosler b-tips and imr 4831

[Kurt505]

Originally Posted by cowmanbob

140 gr nosler b-tips and imr 4831

X2, the hotter the better. Build up until you hit the sweet spot.

[Dick284]

I just scored some 145gr. Grand Slams for the Pit Boss' 280.
So far H4350, looks to be the powder of choice.

[bubba300]

My 280 ai likes 150 gr long range accubonds and h4831

[rottie]

Loading for several .280 rifles thet have all seemed to like 139-140 grain bullets seated on IMR 4350.

[sillyak]

160 grain Nosler AB on 57 grains of H4831.

[Maxwell78]

Originally Posted by bubba300

My 280 ai likes 150 gr long range accubonds and h4831

My cooper like the 150 LRAB's with H4350.

[badbrass]

My Cooper likes 56.5gr of R22 below TSX 140gr. 1 inch easy at 100yds.

[Huntsman]

My TC Pro Hunter likes 57.0grs of R19, CCI primers under a 140gr Barnes TTSX seated just off the lands.
Sub moa @100 yds.

[whitetailhntr]

140 gr TSX over a stout load of IMR 4831 and cci magnum primers.

[Deon54]

56.5gr RL22, CCI LRM primer, 154gr Hornady SP for 2920 fps from my TC Encore, .75 inch groups at 200yrds.

[edober]

140gr Sierra spitzer BT's and IMR 4350. Deadly!