I am trying to find some kind of info as to how to take the bolt apart for my browning x-bolt, there doesn't seem to be any thing anywhere regarding this procedure. any help would be greatly appreciated. if you know how or have a link to somewhere that can give me the steps I would appreciate it.
Not 100% but usually it involves rotating the back of the bolt ( shroud ) counter clock wise. You may have to manually depress anything that is stopping it from rotating. I'm sure more knowledgeable people will chime in...
You don't mess with the screws or roll pins on the bolt shroud. The firing pin/mainspring/bolt shroud unscrews from the bolt body. That's all required or recommended for cleaning. You need to depress the striker on the bottom of the bolt shroud as you unscrew it from the body. I use the corner of a wood work bench to hook the striker on and push hard to depress the spring. It's the same concept as a Rem 700 which I'm sure you can find a youtube video of.
taking browning x-bolt bolt appart
Linear Mode
