|
09-14-2017, 07:59 PM
|
|
|
|
Join Date: Feb 2010
Location: The banks of the Red Deer River
Posts: 737
|
|
Lyman Die Quality ?
I'm just wondering if many people on here have used Lyman dies and how well they like them. All my dies are RCBS except for my 300wsm, they're Lyman. The brass will only go about 1/2 way in. I've tried different brands of brass fired from two different rifles and nothing will feed. I pulled the decapping pin and neck plunger and still a no go.
Anybody else run into this issue?
|
09-15-2017, 12:40 PM
|
|
|
Join Date: Oct 2010
Location: Near Drumheller
Posts: 6,755
|
|
New? Used? stamped for right cartridge? Wrong die in right box?
|
09-15-2017, 12:54 PM
|
|
|
|
Join Date: May 2007
Location: Dreadful Valley
Posts: 14,620
|
|
I've got one set, and have zero issues.
How are you setting your dies up, is the de capping pin and expander ball maybe hitting the web in the case?
Are you using a good lube like Imperial die wax?
__________________
There are no absolutes
|
09-15-2017, 01:48 PM
|
|
|
|
Join Date: May 2007
Location: WMU 214
Posts: 1,817
|
|
Lyman
Most of my dies are either RCBS or Lee but I do have a set of Lyman FL All - American PA 20 DELUXE in 7 MM Rem Mag / 7MM Wea./ 7 X 61 S&H that I got to load my brothers 7 MM Rem mag ammo. His rifle is a Rem 700 BDL that has a tight chamber that would only take factory ammo. the Lyman dies size the reloads tight enough that he can use my reloads.
Nice set of high polished dies that I have never had an issue with. They are knurled at all adjusting points, makes fine adjustments very nice. They are very well made and produce quality ammo.
Last edited by Puma; 09-15-2017 at 02:06 PM.
|
09-15-2017, 02:22 PM
|
|
|
|
Join Date: Jan 2012
Location: On the border in Lloydminster
Posts: 8,364
|
|
I have a set of 270 win dies first time I used them they were so tight I had a hard time pushing a lubed fired case in, two cases later I bent the decapping pin rod $18 later I tried again same thing. I tried a new unfired case, same thing I came to the conclusion they were defective I never pursued the cause borrowed a set of rcbs from a buddy maybe some day I'll send them off to Lyman.
All my other dies are Hornady,Redding, RCBS or lee I've had any problems with those.
__________________
Si vis pacem, para bellum
|
09-15-2017, 02:25 PM
|
|
|
|
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,245
|
|
Quote:
Originally Posted by mad mountain mike
I'm just wondering if many people on here have used Lyman dies and how well they like them. All my dies are RCBS except for my 300wsm, they're Lyman. The brass will only go about 1/2 way in. I've tried different brands of brass fired from two different rifles and nothing will feed. I pulled the decapping pin and neck plunger and still a no go.
Anybody else run into this issue?
|
Dumb question but is the little vent hole plugged?
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
|
09-15-2017, 02:39 PM
|
|
|
Join Date: Mar 2008
Location: Alberta
Posts: 4,279
|
|
Several companies don't use vent holes so I doubt a plugged vent would stop anything.
|
09-15-2017, 07:44 PM
|
|
|
|
Join Date: Feb 2010
Location: The banks of the Red Deer River
Posts: 737
|
|
Quote:
Originally Posted by 32-40win
New? Used? stamped for right cartridge? Wrong die in right box?
|
New, stamped 300wsm on the die
|
09-15-2017, 07:47 PM
|
|
|
|
Join Date: Feb 2010
Location: The banks of the Red Deer River
Posts: 737
|
|
Quote:
Originally Posted by Dick284
I've got one set, and have zero issues.
How are you setting your dies up, is the de capping pin and expander ball maybe hitting the web in the case?
Are you using a good lube like Imperial die wax?
|
I tried with the decapping pin and expander ball out, still won't go in. I'm using hornady one shot lube, it seems to work fine with my other dies.
|
09-15-2017, 07:52 PM
|
|
|
|
Join Date: Feb 2010
Location: The banks of the Red Deer River
Posts: 737
|
|
Quote:
Originally Posted by bat119
I have a set of 270 win dies first time I used them they were so tight I had a hard time pushing a lubed fired case in, two cases later I bent the decapping pin rod $18 later I tried again same thing. I tried a new unfired case, same thing I came to the conclusion they were defective I never pursued the cause borrowed a set of rcbs from a buddy maybe some day I'll send them off to Lyman.
All my other dies are Hornady,Redding, RCBS or lee I've had any problems with those.
|
Sounds similar to my issues. I also tried a new unfired and still a no go. I went to bashaw sports today and picked up a set of rcbs dies and they work fine.
Thanks for the replies but I think I got a defective set. I've emailed Lyman about the issue, if they get back to and would like to see them I'll send them in.
Thanks, Mike
|
09-15-2017, 08:44 PM
|
|
|
Join Date: Aug 2013
Location: Calgary
Posts: 304
|
|
The only Lyman dies I have are set of 38/357 and 303 British. Both work really well for me. Plus the finish on them is really good as well. They are probably 10 or so years old.
|
09-16-2017, 07:56 AM
|
|
|
|
Join Date: May 2007
Location: Central Alberta
Posts: 21,399
|
|
New, stamped 300wsm on the die
Got a .270 SM. I've found those straight parallel sided cases take a lot more force to push into the dies than other calibers. More Oomph ? Had Lyman dies in the past, equal to RCBS.
Grizz
__________________
"Indeed, no human being has yet lived under conditions which, considering the prevailing climates of the past, can be regarded as normal."
John E. Pfeiffer The Emergence of Man
written in 1969
|
09-16-2017, 08:27 AM
|
|
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,582
|
|
I have three sets of Lymans and they are very accurate .
The finish is top notch as well
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
|
09-17-2017, 09:27 AM
|
|
|
|
Join Date: Jan 2012
Location: On the border in Lloydminster
Posts: 8,364
|
|
Quote:
Originally Posted by bat119
I have a set of 270 win dies first time I used them they were so tight I had a hard time pushing a lubed fired case in, two cases later I bent the decapping pin rod $18 later I tried again same thing. I tried a new unfired case, same thing I came to the conclusion they were defective I never pursued the cause borrowed a set of rcbs from a buddy maybe some day I'll send them off to Lyman.
All my other dies are Hornady,Redding, RCBS or lee I've had any problems with those.
|
I measured the base diameter of the hole in my die at .462 270 Win.drawing has a base of .470
For compression my RCBS 280 Rem. die is .468 drawing has a base of .470
I've had Lyman dies before in different calibers and never had a problem these must have been made on Friday afternoon.
__________________
Si vis pacem, para bellum
|
09-18-2017, 01:26 PM
|
|
|
|
Join Date: Jan 2012
Location: On the border in Lloydminster
Posts: 8,364
|
|
Update !
Quote:
Originally Posted by bat119
I measured the base diameter of the hole in my die at .462 270 Win.drawing has a base of .470
For compression my RCBS 280 Rem. die is .468 drawing has a base of .470
I've had Lyman dies before in different calibers and never had a problem these must have been made on Friday afternoon.
|
Until this thread I forgot about the Lyman die, I contacted Lyman with the above information my response;
Good morning,
I’ve gone ahead an ordered a replacement for you. It should be shipping out soon.
Best Regards,
Customer Service
Doesn't get much better than that!
__________________
Si vis pacem, para bellum
|
09-18-2017, 09:15 PM
|
|
|
|
Join Date: Feb 2010
Location: The banks of the Red Deer River
Posts: 737
|
|
I have no doubt that Lyman builds a fine product but this particular die is not right. As far as it taking a little more pressure for the straight walled short mag case I split the top of my 2x6 loading bench trying to feed it then trying to get it out.
On another note, I've still not recieved a reply from Lyman to my email about the issue.
|
09-19-2017, 08:52 AM
|
|
|
|
Join Date: Jan 2012
Location: On the border in Lloydminster
Posts: 8,364
|
|
Quote:
Originally Posted by mad mountain mike
I've still not recieved a reply from Lyman to my email about the issue.
|
Instead of emailing customer service I choose "request RMA" from the dropdown, explained the problem they sent me a tracking number for a new size die.
__________________
Si vis pacem, para bellum
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 12:31 AM.
|