I have a model Cooey model 64 with a busted plastic clip! Iwas told the plastic clip was only produced for a couple of years and the metal clips do not work in that model! I was told there was a conversion kit available does anyone have knowledge of this!
I phoned a certain gun parts place and they have these conversion kit's but they said 9 out of 10 people cannot do this conversion! he said I should have a gun smith do it! Really how hard can it be?
does the breech, where the clip goes into look like an old key hole. if so it might fit.
<nvm that, i did some googleing and looks like you need a conversion kit.
Last edited by savage7mm; 02-24-2011 at 05:08 PM.
Reason: wrong
here is a link on YOUTUBE Video for cooey 64 Kit replacement. There is 4 parts ( this is the first) I will be doing the conversion myself after watching the video
if you have not found a kit yet call Sheps Sports in Lloydminster I think he has a few in stock I got one a year or so ago and did the conversion myself. You will have to do a bit of work on the plate that the magazine goes through. Mine I had to grind a bit. It works but it won't win any beauty contests.
Im bringing this back to life and trying for a hail Mary. Does anyone know where to locate one of these magazine conversion kits for the 64? If so, help a brother out.
If your on Facebook, this guy has a ton of cooey parts. Mark Paste also goes by Markus Cooey Parts. Don't know if he has the conversion kit but don't hurt to ask. I got another name of a guy in Sask that sells them, now I got to find it.
Buy directly from Savage in Canada at least half the price of WGP's A washer sometimes needs to be added to the lower mag well to get the feed angle correct.......Harold
Cooey model 64 conversion kits!
Linear Mode
