Older pse brute. 31"draw. I'm not sure what cam I'd have to go to, but the factory cams aren't made anymore. Would it be possible to use the new cam setup for a similar pse?
ask PSE if you can use the newer cams .... otherwise it will be a be pain to try make something work, string and cable lengths will be custom and hard to determine unless you find some one that has already did something like this to that bow
__________________
APA M32 TF
APA Pro-staff "We are not the SAME"
Spot Hog Pro Staff
Bohning Staff shooter
Stan Releases Pro Staff
i think im going to try copy the plate that was damaged. redrill all teh holes and tap them. lots of file work on the outside of the cam though to get it to be safe though. im up for a challange. if it doesnt work than at least its a learning experience.
John Dudley talks about this in one of his podcasts, I think somewhere in podcasts 47-50. Basically states its a tonne of work and it would be impossible to tune well plus the need the for custom strings and cables makes it way to hard to do well.
But like the previous post stated PSE would be the best to talk to as they may have a similar cam that will work.
Cam changes?
Linear Mode
