Cable Guard on Mathews bending

[High_N_Wide]

Hello Guys,

I have a Mathews MQ-32 and am leaving on Saturday for a caribou hunt. I was shooting yesterday and noticed how close my fletching is to the cable. Upon further inspection the cable guard seems to flex toward the arrow. I shoot 73lbs on this bow and wouldn't think that stress would do it but maybe it is. I only noticed last night so I do not know if it has been like this for a while. If i put the bow in a vice the guard straightens right out. Shooting a 8" group at 50 meters which is not be bad for me, so it does not seem to be effecting accuracy. Wondering if I can fix this quickly or what options I have ?

Thanks

Trev

[High_N_Wide]

No problem,

Talk to an area Mathews Dealer and they thought it was an issue how ever I called Mathews directly and they said no problem, it is suppose to. Just check a couple of measurements and confirm that it is not something else.

Thanks for looking atleast.

Trev

[Prdtrgttr]

Good luck on your Caribou hunt! We all expect photos upon your return. Hunt hard, shoot straight!

[High_N_Wide]

Hoping for lots of good photos and some good video as well.

Thanks for the support !

Trev

[LB 270]

Now's the time to notice that stuff! Glad to hear it won't slow you down. If it does there is always the STW. B & C here you come!
LB

[High_N_Wide]

Lb if I was to use the STW I could almost shoot them from here. I would just have to get them home. I think I will be taking the Tikka T3 Lite .270wsm for back up, just in case there are unwilling participants to the bow hunting!

Trev