|
01-16-2017, 08:13 AM
|
|
|
Join Date: Feb 2012
Posts: 956
|
|
Acreage owners with hottubs
I have a spa berry hottub an live on an acreage..I've filled it up An drained 3 times since being out there An once I let it run for a day An heat up I pull the lid off an the entire inside of the hottub is full and white scale.its gross.is it my well water???never had this issue when I was in town An used city water!so does any acreage owners out there have this issue???pls help An any advise is apretiated!
|
01-16-2017, 08:22 AM
|
|
|
Join Date: Aug 2009
Posts: 3,197
|
|
Yea it's from your well water.
Probably calcium carbonate. It drops out of solution when water is heated.
|
01-16-2017, 08:34 AM
|
|
|
|
Join Date: Apr 2009
Location: High Level
Posts: 2,237
|
|
You can take a water sample and figure out what you are dealing with, and then treat with the required chemicals
I just went the easy way and bring out a water truck load of treated potable water. It's cheaper and easier in the long run than using a pile of chems
__________________
Beer- Because good stories never start with a salad.
|
01-16-2017, 09:34 AM
|
|
|
|
Join Date: Nov 2010
Location: Central Alberta
Posts: 134
|
|
Quote:
Originally Posted by dale7637
You can take a water sample and figure out what you are dealing with, and then treat with the required chemicals
I just went the easy way and bring out a water truck load of treated potable water. It's cheaper and easier in the long run than using a pile of chems
|
A friend of ours who also lives on an acreage does the same.
|
01-16-2017, 10:09 AM
|
|
|
Join Date: Feb 2012
Posts: 956
|
|
Thanks for the help guys.my only worry is I get a water truck in an fire it up An then all the scale in the piping An tubing comes out An then the tub is fulla that god awful stuff an I'll be back to a square one again.what chemicals break that stuff down of is here any??gues if I have to drain an refill I can but doing that in the cold is a pain.
|
01-16-2017, 10:25 AM
|
Banned
|
|
Join Date: Jan 2010
Location: rollyview
Posts: 7,860
|
|
clr. calcium lime and rust remover
|
01-16-2017, 10:40 AM
|
|
|
Join Date: Feb 2012
Posts: 956
|
|
Quote:
Originally Posted by fish_e_o
clr. calcium lime and rust remover
|
That's what I used to scrub the inside an it worked great,not sure how to clean out the piping.
|
01-16-2017, 12:43 PM
|
|
|
|
Join Date: Mar 2008
Location: Caroline
Posts: 7,271
|
|
Brother just got a high end water filter and screws on the end of the garden hose. Fixed the problem
__________________
Two reasons you may think CO2 is a pollutant
1.You weren't paying attention in grade 5
2. You're stupid
|
01-16-2017, 01:44 PM
|
|
|
|
Join Date: Jun 2011
Location: Red Deer
Posts: 330
|
|
Quote:
Originally Posted by snowman160
That's what I used to scrub the inside an it worked great,not sure how to clean out the piping.
|
Vinegar works too, and is cheaper.
|
01-16-2017, 01:59 PM
|
|
|
Join Date: Oct 2008
Location: Location
Posts: 4,961
|
|
Quote:
Originally Posted by snowman160
That's what I used to scrub the inside an it worked great,not sure how to clean out the piping.
|
Yes and you have to be careful what chemicals you use as some can eat away rubber seals and do more damage than fix. Best to talk to the manufacturer.
OP well water is not advisable. I would haul in a load from a company like commercial water to fill that tub. I usually change water once per winter.
Hope you figure it out. Well water and all things plumbing don't usually go well together.
|
01-16-2017, 05:42 PM
|
|
|
Join Date: Feb 2010
Location: ft assiniboine area
Posts: 1,392
|
|
had lots of issues with water quality when we first got the hot tub . after dealing with the now defunct place i bought it from for months i branched out and found someone who determined my water was too soft . added calcium and water cleared right up .
|
01-16-2017, 06:02 PM
|
|
|
|
Join Date: Jun 2007
Posts: 204
|
|
Muratic acid is what we use. Works good. Do you have a test kit for alkalinity and water hardness?
|
01-16-2017, 06:53 PM
|
|
|
|
Join Date: Mar 2008
Location: Caroline
Posts: 7,271
|
|
Quote:
Originally Posted by B00MER
Vinegar works too, and is cheaper.
|
And far less toxic
__________________
Two reasons you may think CO2 is a pollutant
1.You weren't paying attention in grade 5
2. You're stupid
|
01-16-2017, 06:55 PM
|
Banned
|
|
Join Date: Nov 2015
Posts: 1,006
|
|
Typically well water is crazy soft for where you want it. You definitely need to increase the hardness to 150-200ppm. Most well water starts out very close to 0.
Muriatic acid will lower your alkalinity and ph without throwing your total dissolved solids out of whack and makes balancing well water fairly cheap.
One question i have is if the well water was always giving you this issue as im wondering if this white stuff is a bacteria called pseudomonis.
Well water is easy to balance if your doing it properly. Where abouts do you live? If you have a beachcomber dealer near your home you can take them a sample of the well water for them to test. Its free and they are awesome at diagnosing if the well water is okay to use or its better to truck in.
|
01-16-2017, 06:56 PM
|
|
|
Join Date: Jan 2010
Location: Smithers
Posts: 341
|
|
Second the caution on harsh chemicals. Come see me to rebuild your pump.
B.
|
01-16-2017, 07:05 PM
|
|
|
Join Date: Oct 2009
Location: Edmonton
Posts: 798
|
|
I filled my tub last year with water from my well (first time filling tub). It looked like very dirty water: as in I couldn't see the bottom of the tub. I think I have a tannin problem. I haul it from the truck fill now, no problem except the ruts on my lawn from my truck.
|
01-16-2017, 07:14 PM
|
|
|
Join Date: Oct 2013
Posts: 882
|
|
Clr or vinigar will clean it out. You probably run off well water which generally has a lot more calcium in it. Ours does and we live in town. Sounds like the trucking water is a better bet. I cant imagine the amount of chemicals used to make that go away would make for a fun hot tub
__________________
I seem to really be rather long winded.
|
01-17-2017, 05:57 AM
|
|
|
|
Join Date: Oct 2012
Posts: 4,032
|
|
Quote:
Originally Posted by Commander B
Come see me to rebuild your pump.
|
How much is a typical pump rebuild ?
|
01-17-2017, 06:19 AM
|
|
|
|
Join Date: May 2007
Location: wmu 222, member #197
Posts: 4,907
|
|
Quote:
Originally Posted by R3illy
Typically well water is crazy soft for where you want it. .
|
Not reslly a blanket statement, but water quality depends on the aquifer that is available to the driller. The quality of the cement job and many factors but not all wells are naturally soft....both of mine happen to be.
|
01-17-2017, 10:06 AM
|
Banned
|
|
Join Date: Nov 2015
Posts: 1,006
|
|
Quote:
Originally Posted by tri777
How much is a typical pump rebuild ?
|
$250 tops assuming your bearings have blown.
Quote:
Originally Posted by roger
Not reslly a blanket statement, but water quality depends on the aquifer that is available to the driller. The quality of the cement job and many factors but not all wells are naturally soft....both of mine happen to be.
|
There are definitely lots of variables to well water for sure. Some well water isnt worth putting into a hot tub.. but for the most part balancing well water is super easy if you have someone to explain what you need to do. Many here are making it out to be way worst then it is...
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 11:01 PM.
|