Question on Scoring Deer

[300magman]

Hey, if a deer would have been a mainframe 6 x 5, but the browtine was broken off less than an inch from the main beam on the side that would have been 5 (so now its a 6 x 4), does the G2 now get scored as the G1, G3 as G2, etc.

Also, as far as the H measurements, would I still take the H1 between the burr and the busted off brow tine, then H2 between the busted tine and the G2, or would the H1 be between the burr and the G2, H2 between the G2 and G3, etc.

Thanks for any advice!

[steve]

The H1 is still taped in the same spot.

[Chet]

Originally Posted by steve

The H1 is still taped in the same spot.

X 2


Also G-1 is G-1 even if it is broken off

[ram crazy]

G1 is always G1 and if it's broke off under 1" it gets scored as 0", as a point has to be a minimum 1" to get credited.