|
02-26-2024, 10:54 AM
|
|
|
|
Join Date: Aug 2009
Location: Calgary, Ab
Posts: 983
|
|
Rifle bedding
So, I’m just going to try and get my ducks lined up ahead of time instead of scrambling.
I bought a new Tikka T3 superlite. Bought new bottom metal, a Near manufacturing scope mount. Bolt fluted. And it shoots well.
So then I went and bought a Stocky stock carbon fibre stock with their new carbon vblock. Anyway, Stocky’s says no need for bedding, bolt it in and go!
So, do I bolt it in and go? Or bed it?
I do not have the stock yet, in the mail. They say it should fit better than factory, or as good.
I have never had a rifle bedded before? Is there a member here that could do it for me? I’m sure I could you tube it, I’m not incompetent, lol. I just don’t have the desire to do it and I think would skew my outcome.
I’ll pay for the time and materials. I’m in South Calgary.
Tullfan
|
02-26-2024, 11:47 AM
|
|
|
|
Join Date: Dec 2008
Location: Near Edmonton
Posts: 15,054
|
|
Bolt it in and try it. If it won't shoot at least as good as the factory non-bedded stock, send it back. You are paying big bucks for the V-block technology. If you are going to bed the rifle, no need to pay extra for something bedding will effectively eliminate anyhow.
|
02-26-2024, 03:52 PM
|
|
|
Join Date: Aug 2016
Posts: 40
|
|
I'd send it to Henry Rempel, a local gunsmith. He does spectacular work.
|
02-26-2024, 03:57 PM
|
|
|
Join Date: Jul 2015
Location: Calgary, AB
Posts: 1,025
|
|
I would take the manufacturers recommendation first, then if it doesn't shoot well look for a solution or return the stock...
|
02-26-2024, 04:19 PM
|
|
|
|
Join Date: Aug 2009
Location: Calgary, Ab
Posts: 983
|
|
Awesome, thank you gentlemen. We’ll see how it goes once it gets here.
I’ll take some pics, should be sexy.
Tullfan
|
02-27-2024, 12:17 AM
|
|
|
|
Join Date: Dec 2008
Location: Near Edmonton
Posts: 15,054
|
|
You we will have to post up the results once you have it in the new stock.
I am just in the process of Devcon bedding the Anschutz 1710 HB I just picked up. Most of them are really well bedded and quite a few I have not actually glass bedded, just use them the way they came from the factory but this one has a very different recoil lug arrangement than any of my other Anschutz rifles. This one actually has a recoil lug similar to a Rem 700, though much smaller, rather than the tightly inset into the stock, locating lug on most 54 actions.
I find the fit of the recoil lug and the bedding in general to be too loose for my liking. I am a big fan of bedding most rifles for both accuracy and stability of the wood, not to mention resistance to compression and cracking in the inletted areas. This one already shoots really good groups so it will be interesting to see if they get even better after bedding the recoil lug and the foirst .75" of the barrel/chamber area.
|
02-27-2024, 06:25 PM
|
|
|
|
Join Date: Aug 2009
Location: Calgary, Ab
Posts: 983
|
|
Quote:
Originally Posted by Dean2
You we will have to post up the results once you have it in the new stock.
I am just in the process of Devcon bedding the Anschutz 1710 HB I just picked up. Most of them are really well bedded and quite a few I have not actually glass bedded, just use them the way they came from the factory but this one has a very different recoil lug arrangement than any of my other Anschutz rifles. This one actually has a recoil lug similar to a Rem 700, though much smaller, rather than the tightly inset into the stock, locating lug on most 54 actions.
I find the fit of the recoil lug and the bedding in general to be too loose for my liking. I am a big fan of bedding most rifles for both accuracy and stability of the wood, not to mention resistance to compression and cracking in the inletted areas. This one already shoots really good groups so it will be interesting to see if they get even better after bedding the recoil lug and the foirst .75" of the barrel/chamber area.
|
You were actually the reason I made this post. You made the bedding sound magical and I wanted some of that magic? I don’t know if I need it yet, lol. I’ll let you guys know what happens. I may hate the stock?
We’ll see.
Tullfan
|
02-27-2024, 08:31 PM
|
|
|
Join Date: Jul 2015
Location: Calgary, AB
Posts: 1,025
|
|
Hopefully all goes smoothly and it shoots better than factory !
|
02-28-2024, 09:22 AM
|
|
|
Join Date: Jan 2012
Location: Calgary
Posts: 1,706
|
|
Make sure you post up some pics and results when you get the new stock on and setup.
I've had my eye on one of those for a while now, I almost pulled the trigger a couple weeks ago but ended up holding off.
I'm VERY curious to see your results.
|
02-28-2024, 07:17 PM
|
|
|
|
Join Date: Aug 2009
Location: Calgary, Ab
Posts: 983
|
|
Quote:
Originally Posted by Walleyedude
Make sure you post up some pics and results when you get the new stock on and setup.
I've had my eye on one of those for a while now, I almost pulled the trigger a couple weeks ago but ended up holding off.
I'm VERY curious to see your results.
|
You bet. It shipped today. It was about $850ish shipped, and there may or may not be brokerage fees.
So for almost a grand, it better be sexy! Lol. Uuhm I mean shoot well.
Tullfan
|
03-06-2024, 07:01 PM
|
|
|
|
Join Date: Aug 2009
Location: Calgary, Ab
Posts: 983
|
|
Stocky stock Carbon fiber
Well just a quick update.
Stock arrived today. It sure is pretty. However, the action rocked up and down in the stock. The moutain tactical recoil lug was loos AF, it moves back and forth about .020", the bottom metal doesn"s sit flush with the stock, the back of the action sits way low in the stock, the rear sling swivel is not screwed in all the way, and the limbsaver, mostely fits, lol.
So the stock will be going back, with exchange and brokerage it was about $1000 landed.
I'll sell it for what I paid less brokerage if someone wants a nice stock to bed to their left hand tikka. This guys not going to do it.
Sorry for the bad news. I wanted to love this stock. Sigh.
Tullfan
|
03-06-2024, 07:03 PM
|
|
|
|
Join Date: Feb 2012
Location: Blackfalds
Posts: 6,951
|
|
Quote:
Originally Posted by tullfan
Well just a quick update.
Stock arrived today. It sure is pretty. However, the action rocked up and down in the stock. The moutain tactical recoil lug was loos AF, it moves back and forth about .020", the bottom metal doesn"s sit flush with the stock, the back of the action sits way low in the stock, the rear sling swivel is not screwed in all the way, and the limbsaver, mostely fits, lol.
So the stock will be going back, with exchange and brokerage it was about $1000 landed.
I'll sell it for what I paid less brokerage if someone wants a nice stock to bed to their left hand tikka. This guys not going to do it.
Sorry for the bad news. I wanted to love this stock. Sigh.
Tullfan
|
That’s unfortunate to hear.
I have just handled a McMillan Game Warden and a Pure Precision Altitude and they are both great stocks.
__________________
Trudeau and Biden sit to pee
|
03-06-2024, 07:05 PM
|
|
|
Join Date: Jan 2013
Location: onoway, Ab
Posts: 6,995
|
|
Well that sucks. I think I would just get a bell and Carlson from PR.
|
03-06-2024, 08:06 PM
|
|
|
|
Join Date: Feb 2012
Posts: 2,310
|
|
Quote:
Originally Posted by Smokinyotes
Well that sucks. I think I would just get a bell and Carlson from PR.
|
Agree.
I've got a few B&C stocks. The fit has always been good. After bedding them, the fit is great. I have found them to be nice upgrade on the factory stock.
|
03-06-2024, 08:40 PM
|
|
|
|
Join Date: Aug 2009
Location: Calgary, Ab
Posts: 983
|
|
Quote:
Originally Posted by Big Sky
Agree.
I've got a few B&C stocks. The fit has always been good. After bedding them, the fit is great. I have found them to be nice upgrade on the factory stock.
|
My buddy at work got a B&c from prophet, fit great shoots good too, lol.I had to have carbon, mines poopy. Lol. Well when I get my money back. I’ll just get one of them. Lol.
Sad Tullfan.
|
03-06-2024, 10:32 PM
|
|
|
|
Join Date: Dec 2008
Location: Near Edmonton
Posts: 15,054
|
|
Wildcat are made right here and they are as good as it gets. He will fully bed and paint it for less than the one you ordered in.
|
03-07-2024, 10:51 AM
|
|
|
Join Date: Jul 2009
Posts: 476
|
|
Quote:
Originally Posted by Dean2
Wildcat are made right here and they are as good as it gets. He will fully bed and paint it for less than the one you ordered in.
|
I will second this I have 2 wildcat stocks one vartac on my semi custom .223 and a KS Tac hunter on my 6.5X55. He makes a great quality product and I've been pleased with mine. I had him do a full install on my .223 which included painting bedding etc and he does one of the nicest rifle bedding jobs I've ever seen.
Last edited by prarie_boy1; 03-07-2024 at 11:00 AM.
|
03-07-2024, 10:59 PM
|
|
|
Join Date: Aug 2016
Posts: 66
|
|
i do not see a left hand option on wildcats website
__________________
All type of firearms owners should hang together or we will all hang separately
|
03-08-2024, 06:09 AM
|
|
|
Join Date: May 2007
Posts: 15,851
|
|
There isn’t one, but they can be converted to LH.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
03-12-2024, 02:47 PM
|
|
|
|
Join Date: Aug 2009
Location: Calgary, Ab
Posts: 983
|
|
Update cause we love updates.
After talking to Stocky, and voicing my displeasure they offered me some cash back for the hassle. So I have kept the stock. I gave the sling swivel another turn and it now sits flush. That bottom metal that sits proud by like (without measuring) a 32nd maybe less. They said that is normal and the way they are manufactured. OK? and where the tang sits, they make it a little deeper to provide space to bed and contour if need be.
So it was not the drop in stock I had hoped. It is also for too time consuming for me to contour my stock or bed it. blah blah blah.
I can sit on it for a bit or sell it to someone who may want to or has the time to fit it nicely. I fix motorcycles, symmetrical and pretty are my thing, some things irritate me when I don't get my way.
I did buy a B&C stock from PR that will be here Thursday,($500, to my door). The aluminum bedding block seems like a good idea, and the fit seems good (as far as my co workers rifle looks) so, round 2 of this nonsense. Hopefully it won't need to be bedded, but I guess that's always an option, eh. Was there anything wrong with the factory stock? lol.
Anyway, update, updated.
See ya Thursday for update 3. lol.
Tullfan
|
03-12-2024, 03:46 PM
|
|
|
Join Date: Dec 2008
Posts: 1,300
|
|
Quote:
Originally Posted by tullfan
Well just a quick update.
Stock arrived today. It sure is pretty. However, the action rocked up and down in the stock. The moutain tactical recoil lug was loos AF, it moves back and forth about .020", the bottom metal doesn"s sit flush with the stock, the back of the action sits way low in the stock, the rear sling swivel is not screwed in all the way, and the limbsaver, mostely fits, lol.
So the stock will be going back, with exchange and brokerage it was about $1000 landed.
I'll sell it for what I paid less brokerage if someone wants a nice stock to bed to their left hand tikka. This guys not going to do it.
Sorry for the bad news. I wanted to love this stock. Sigh.
Tullfan
|
Way too many complaints about Stockys carbon stocks online for me to try one. The peak 44 stock looks good though.
|
03-14-2024, 09:29 PM
|
|
|
Join Date: Nov 2010
Posts: 79
|
|
I just received my stockys vg tikka stock not long ago and think it fits good. I haven’t shot it to say how it shoots compared to factory but it fits just as good as factory if not better. I did look into the wildcats as well but the stockys came out significantly cheaper during one of the sales they had. I mean it’s all for nothing though if doesn’t shoot well but as far as fit and looks I have not complaints about it so far.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 01:08 AM.
|