Go Back   Alberta Outdoorsmen Forum > Main Category > Guns & Ammo Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 03-31-2020, 01:57 PM
curt7mm curt7mm is offline
 
Join Date: May 2007
Posts: 338
Default Ammo info for new Tikka T3x ss 30-06

I have a new Tikka 30-06 that I will be breaking in this spring. Looking for advise/suggestions as to which factory/off the shelf bullet shoots the best out of this gun. Thanks and stay safe everyone.

Sent from my SM-G975W using Tapatalk
Reply With Quote
  #2  
Old 03-31-2020, 02:43 PM
brewster29 brewster29 is offline
 
Join Date: Dec 2011
Location: East Kootenays, BC
Posts: 1,168
Default

FWIW, My neighbour's T3 shoots tiny cloverleaf groups with Remington Premier bonded 180's.

But it's a Tikka, so it will likely shoot most loads very well.
Reply With Quote
  #3  
Old 03-31-2020, 03:40 PM
Dick284's Avatar
Dick284 Dick284 is offline
 
Join Date: May 2007
Location: Dreadful Valley
Posts: 14,611
Default

30’06 ammo would be my choice.

Every rifle is unique unto its self, so what works for me in my rifle might not do so well in your rifle, even if we both have the same make and model of rifle.

Go buy what is available and will be available in the future. Try different weights and manufacture, and find out what shoots best in your rifle.

To this end, getting familiar with your new rifle is always a good thing, and practice always makes perfect.
__________________


There are no absolutes
Reply With Quote
  #4  
Old 03-31-2020, 04:22 PM
Buckhead Buckhead is offline
 
Join Date: Sep 2007
Location: Strathcona County
Posts: 1,896
Default

A Nosler Accubond is usually my first try in any of my Tikka's.
They have been quite accurate in a number of different rifles.

If that doesn't work I will move down the line as Dick says.
Reply With Quote
  #5  
Old 03-31-2020, 04:55 PM
lone wolf's Avatar
lone wolf lone wolf is offline
 
Join Date: Mar 2009
Location: Medicine Hat
Posts: 3,219
Default

Quote:
Originally Posted by Dick284 View Post
30’06 ammo would be my choice.

Every rifle is unique unto its self, so what works for me in my rifle might not do so well in your rifle, even if we both have the same make and model of rifle.

Go buy what is available and will be available in the future. Try different weights and manufacture, and find out what shoots best in your rifle.

To this end, getting familiar with your new rifle is always a good thing, and practice always makes perfect.
x2 .... I have a Tikka that shoots tiny groups consistently with cheap Federal factory. I have had others that prefer the more expensive stuff. They are all slightly different. Bottom line though is that you will become familiar with the new gun.
__________________
Participating in a gun buy back program because you think that criminals have too many guns is like having yourself castrated because you think your neighbors have too many kids...
Reply With Quote
  #6  
Old 03-31-2020, 04:57 PM
wwbirds's Avatar
wwbirds wwbirds is offline
 
Join Date: May 2009
Location: near Calgary
Posts: 6,650
Default Dicks info is great

Before I started reloading I looked at reasonably priced readily available ammo. You need something reasonable so you can practice lots. Not going to do that with a premium bullet. Once you are very competent shoot a few premium loads for sight in for that particular hunting but keep your cheap ammo settings for future cheap practice. I used 165 hornady rounds for practice and both my son and I found 165 gr Nosler partition reloads had almost the exact POI before heading out for elk or moose.
__________________
a hunting we will go!!!!!!
Reply With Quote
  #7  
Old 03-31-2020, 05:44 PM
curt7mm curt7mm is offline
 
Join Date: May 2007
Posts: 338
Default

Great suggestions, guys. I will definitely use inexpensive ammo for the break in phase then move to a better quality ammo for my final sight in. 165gr accubonds seems to be a popular choice for the 30-06. But you're right, there might be another bullet that best suites this rifle.

Sent from my SM-G975W using Tapatalk
Reply With Quote
  #8  
Old 03-31-2020, 06:16 PM
Tronneroi's Avatar
Tronneroi Tronneroi is offline
 
Join Date: Feb 2018
Location: Calgary
Posts: 470
Default

Quote:
Originally Posted by curt7mm View Post
Great suggestions, guys. I will definitely use inexpensive ammo for the break in phase then move to a better quality ammo for my final sight in. 165gr accubonds seems to be a popular choice for the 30-06. But you're right, there might be another bullet that best suites this rifle.

Sent from my SM-G975W using Tapatalk
Not sure where you're located but I have a pile of 150gr Winchester Deer Season XP's. I stocked up a couple years before I started handloading and they're surplus to my needs. PM me if you're interested in making a deal.
Reply With Quote
  #9  
Old 03-31-2020, 09:25 PM
bpk1982's Avatar
bpk1982 bpk1982 is offline
 
Join Date: Jul 2011
Location: Calgary, SE
Posts: 428
Default Tikka T3X 30/06

My buddy bought the exact rifle as yours last season and it shot 165 Fusions very well.
Reply With Quote
  #10  
Old 04-01-2020, 12:44 PM
karateka karateka is offline
 
Join Date: Dec 2019
Posts: 18
Default

I have had good success with 165 gr. from Winchester.
Reply With Quote
  #11  
Old 04-01-2020, 08:01 PM
Jerry D's Avatar
Jerry D Jerry D is offline
 
Join Date: Feb 2009
Location: Ontario
Posts: 1,405
Default

Federal fusions are probably the most economical for a bonded bullet.

What are you hunting?

Deer go with 150s or 165gr

Bigger go with 165s or 180s

Start with affordable ammo, remington corelokt or federal powerpoints probably... $25.00 per box of 20
Reply With Quote
  #12  
Old 04-01-2020, 10:25 PM
brewster29 brewster29 is offline
 
Join Date: Dec 2011
Location: East Kootenays, BC
Posts: 1,168
Default

Fusions shoot well, but they are not really a bonded bullet. Despite the advertising mumbo jumbo what they are is an electroplated bullet. Think heavy duty Berry's bullet...don't expect them to perform like an Accubond on game.
Reply With Quote
  #13  
Old 04-02-2020, 05:02 PM
curt7mm curt7mm is offline
 
Join Date: May 2007
Posts: 338
Default

Quote:
Originally Posted by Jerry D View Post
Federal fusions are probably the most economical for a bonded bullet.



What are you hunting?



Deer go with 150s or 165gr



Bigger go with 165s or 180s



Start with affordable ammo, remington corelokt or federal powerpoints probably... $25.00 per box of 20
I will definitely start with a blue box of Federals. Half the cost of the Accubonds or SST's.

Sent from my SM-G975W using Tapatalk
Reply With Quote
  #14  
Old 04-02-2020, 05:22 PM
caltheim caltheim is offline
 
Join Date: Feb 2011
Posts: 43
Default

I have a Tikka 30-06 and it's always shot Hornady well. I used to shoot the superformance interbond 180's, and then I switched to the Hornady Precision Hunter 178gr ELDX - excellent accurancy and performance on the deer I've shot so far!
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:36 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.