Extractors for an old lakefield mossberg

[MountainTi]

Any ideas where to look for a set of extractors for an old lakefield mossberg 500 12 gauge? Have one that would convert nicely to a bear scare by shortening the barrel, but the extractors are wore. Misses pulling the odd hull

[Dewey Cox]

Western gun parts?

[brewster29]

Originally Posted by MountainTi

Any ideas where to look for a set of extractors for an old lakefield mossberg 500 12 gauge? Have one that would convert nicely to a bear scare by shortening the barrel, but the extractors are wore. Misses pulling the odd hull

Numrich Arms shows them in stock.

[fps plus]

For the most part extractors do not wear out . They get bent , broken or they get crud underneath them . Often it’s a chamber issue that needs a good cleaning / polishing

[MountainTi]

Originally Posted by fps plus

For the most part extractors do not wear out . They get bent , broken or they get crud underneath them . Often it’s a chamber issue that needs a good cleaning / polishing

I'll give that a whirl, thanks. If it doesn't work I'll probably just take it up to Bob Galloway and he can cut the barrel off at the same time

[Jims83cj5]

Originally Posted by MountainTi

I'll give that a whirl, thanks. If it doesn't work I'll probably just take it up to Bob Galloway and he can cut the barrel off at the same time

Let me know how you make out, I have a model B and it’s the only part I can’t find, I’ve tried all the place mentioned and all through the states