Specs for a High Country bow

[JohnB]

I have a friend that has a High Country Four Runner. Does anyone know the the following specs?

Brace height
ATA
Spring and cable length

I have no specs on the bow and I looked on the High country website and also sent an email but got no reply.

Thanks.

[wctbowtech]

Originally Posted by JohnB

I have a friend that has a High Country Four Runner. Does anyone know the the following specs?

Brace height
ATA
Spring and cable length

I have no specs on the bow and I looked on the High country website and also sent an email but got no reply.

Thanks.

You'll need to know what the cam and limb length is then go to this link and you'll get the specs you are looking for. http://www.highcountryarchery.net/im...tringchart.pdf

thanks

Len

[JohnB]

Originally Posted by wctbowtech

You'll need to know what the cam and limb length is then go to this link and you'll get the specs you are looking for. http://www.highcountryarchery.net/im...tringchart.pdf

thanks

Len

Thanks Len; I checked this out before but it doesn't give me my ATA and brace
height. The bow has 16" limbs and I the XL cam. He had a string and cable put on three years ago and I'm thinking they put the wrong ones on; he is getting 83#'s out of his 70# bow. If I had the ATA and brace height I would be able to tell if the bow is in spec.

[wctbowtech]

Try getting a length of the cable and string currently on the bow and check it again what is in the pdf file. If the cable is short you'll get excessive draw weight and if the string is long you would get more draw weight as well. I think the ATA should be around 36".