Prop Shop

[Topwater]

Is there a good prop shop in the Edmonton area? I have one that needs repair and another I'd like some custom speed tweaking done

[BEL]

I believe there is a guy in Ponoka who does them. I gave my bent prop to a friend who in turn took it to the guy. Did a great job. If you can't find one I will look this guy's number up for you. Don't have the info at hand. BEL

[208prov]

Originally Posted by Topwater

Is there a good prop shop in the Edmonton area? I have one that needs repair and another I'd like some custom speed tweaking done

i send mine to Mark Croxton, Awsome work and gains 200 rpms and usually 1-2 mph

[bentley]

Originally Posted by BEL

I believe there is a guy in Ponoka who does them. I gave my bent prop to a friend who in turn took it to the guy. Did a great job. If you can't find one I will look this guy's number up for you. Don't have the info at hand. BEL

Would you mind posting the number on here ? I was looking for a prop shop in central AB. but ended up driving to Ardrie to Prop Masters . Who did a great job for us but would like someone closer .

[BEL]

I will get that number but will take me a day or so. BEL

[Agb Crash]

Talk to Kris At budget Prop and ATV just north of fishing hole on 91 st north of 51st ave

5921 91 St NW Edmonton, AB T6E 6A7
(780) 434-6777



CRash

[Bound2Fish]

If you ever get down to Airdrie, give these guys a call. I have never used them myself, but I know a couple guys who have and said he has done a great job.

http://www.prop-masters.com/

[BEL]

The prop builder who lives east of Ponoka is Barry Christenson 1-403-783-2451. Did a great job for myself and 2 friends. Hope this helps. BEL

[baptiste_moose]

Originally Posted by Agb Crash

Talk to Kris At budget Prop and ATV just north of fishing hole on 91 st north of 51st ave

5921 91 St NW Edmonton, AB T6E 6A7
(780) 434-6777



CRash

x2. Your best bet for sure. Old school tools with amazing results. Trued a shaft on a 75 yammy 4 stroke for me to a T!!

[Divert]

X3 for Budget Prop Shop on 91st

Went in with a question about why my prop wasnt fitting snug, two hours later was walking out with a new prop shaft that he fab'd up, Amazing work.

[javlin101]

Originally Posted by Agb Crash

Talk to Kris At budget Prop and ATV just north of fishing hole on 91 st north of 51st ave

5921 91 St NW Edmonton, AB T6E 6A7
(780) 434-6777



CRash

Did my SS prop and look brand new.

[CantThinkOfAName]

Interesting comments about budget prop and atv... I went in there looking for a prop for a surface drive project I'm working on and whomever I talked to was useless beyond belief.
Basically told me they can't order parts (I assumed they wouldn't have a CCW prop in stock).
Tried to spin the ignorance blame on me by asking me what my shaft was for the prop. I told him I can make a shaft to whatever the prop happens to be... threaded, splined, roll-pin, I just need a prop to fit my horsepower and what I'm using it for. And he looked at me like a confused puppy, which he shouldn't have if they have the capability to machine.