Quote:
Originally Posted by leaffan
I purchased this rifle new it is a 7mm REM MAG. I never had a problem with it until a friend told me to try some of his handloads. I tried one and noticed the bolt was a little bit hard to close, assumed kit was just aa tight case and fired the cartridge. NEVER ASSUME ANYTHING. I HAD A VERY DIFFICULT TIME OPENING THE BOLT AND EJECTING THE CASE. DISCOVERED THE PRIMER LAYING IN THE CHAMBER NOT IN THE SPENT CASE. I stepped back and thanked the LORD .MY BODY WAS STILL INTACT. I took the rifle home and cleaned it and after a thorough inspection did not notice anything amiss. I do not know whether it is the rifle or just the experience that I had but I do not shoot this rifle as good as the others I have. THIS USED TO BE MY FAVORITE.Any suggestions or tips would be appreciated, thanks in advance
|
Rule #1: NEVER trust anyone's handloads but your own carefully developed ones. What's safe in my rifle may be way overloaded in yours. What's hot in my rifle may be dangerous in another.
If the primer was out of the spent case the case head has been expanded a lot, indicating extreme high pressure.
You really should get the headspace checked.