|
04-17-2010, 06:31 PM
|
Banned
|
|
Join Date: Apr 2010
Location: GFBC
Posts: 70
|
|
Pmc brass
Has any one shot 257 weatherby pmc Brass?... I was lucky to get some they where destroying it but got some good Q or not?
|
04-17-2010, 06:48 PM
|
Banned
|
|
Join Date: Feb 2008
Posts: 1,076
|
|
never heard of it??
Apparently made in Korea,, suppose to tough brass, heavier than some other brass, case capacity may be less than others..
Last edited by noneck180; 04-17-2010 at 06:55 PM.
|
04-17-2010, 06:54 PM
|
|
|
|
Join Date: Jan 2010
Posts: 1,090
|
|
Pmc...
Up until I recently acquired Weatherby brass for my Savage .257WBY, PMC was all I used. It's very tough stuff but you have to really watch for cracking because it is also very thin brass.
If you know of where I could get some PMC brass, or if you want to get rid of some yourself, PM me!
|
04-17-2010, 06:56 PM
|
Banned
|
|
Join Date: Apr 2010
Location: GFBC
Posts: 70
|
|
Realy I am looking at one right know got about 500... and then got some barn burning silver fedrals... 7mm weatherby ... about 200 for 50 buck... can I neck them down to 257?.... Had a m77 action put to a North west Barrel.... has anyone ever had anything to to do or shot a nwb?
|
04-17-2010, 07:00 PM
|
Banned
|
|
Join Date: Feb 2008
Posts: 1,076
|
|
wouldn't neck down NP brass ,, can flake off
|
04-17-2010, 07:02 PM
|
|
|
Join Date: Dec 2008
Location: Camrose
Posts: 45,164
|
|
I hope that the PMC hand gun ammunition is loaded into decent brass,as I just bought 1000 rounds of PMC 38spl ammunition at a super deal, with the intention of reloading the brass.
|
04-17-2010, 07:06 PM
|
Banned
|
|
Join Date: Apr 2010
Location: GFBC
Posts: 70
|
|
Hi A look for my E Just send me a few bucks for ship and I will sent you 20. and I will send you some 7mm brass neck it down and give me the low down and tell me how you did it and your thoughts.
|
04-17-2010, 07:27 PM
|
|
|
|
Join Date: Jan 2010
Posts: 1,090
|
|
.257wby
Hi maxx
I'm not sure I caught all the details of your post. I'd cerainly be interested in some of the .257WBY PMC brass in a larger quantity, but, the idea of necking down 7mm brass probably isn't something I'd try, especially with it being silver/nickle. I'd much sooner buy Weatherby/Norma .257WBY brass than go through the procedure of necking down 7mm brass.
Is the .257 brass once-fired brass, or unfired brass?
|
04-17-2010, 07:31 PM
|
Banned
|
|
Join Date: Apr 2010
Location: GFBC
Posts: 70
|
|
looking at the pic..... Tight neck... what do you think I will ship ... man thats BAD!.. sorry I made that offer.
|
04-17-2010, 07:41 PM
|
|
|
|
Join Date: Jan 2010
Posts: 1,090
|
|
...ok?...
|
04-17-2010, 07:41 PM
|
Banned
|
|
Join Date: Feb 2008
Posts: 1,076
|
|
Is everything Okay Maxx?
|
04-17-2010, 10:46 PM
|
|
|
|
Join Date: Feb 2010
Location: In the woods
Posts: 8,923
|
|
Didn't know PMC made brass for anything other than .223 .308 7.62x39 and .50... at least as far as rifles go
|
04-18-2010, 09:10 AM
|
|
|
Join Date: May 2009
Location: Fort Saskatchewan
Posts: 284
|
|
I have just over 200 pieces of PMC in 300WM and it has treated me very well. I would love to grab another 200+ if I could ever find any.
J
|
04-18-2010, 01:13 PM
|
|
|
|
Join Date: Jan 2010
Posts: 1,090
|
|
.257 pmc wby
I gave up looking for .257WBY PMC brass a long time ago, but if anyone knows of where I could get some, it'd make my day!!!!
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 02:03 AM.
|