AR 500 targets

[Robmcleod82]

Hey guys,
A couple friends and I are going to have some AR 500 Targets made up.
Figured it wouldn't hurt to offer the chance for you guys to get in on the group buy.
Here are the list of target styles and prices.

- 8" circle or square - 3/8" - $35 each, 1/2" - $45 each
- 10" circle or square - 3/8" - $45 each, 1/2" - $55 each
- 12" circle or square - 3/8" - $55 each, 1/2" - $65 each
- Full-size IPSC plate - 30"x18" - 3/8" - $125 each, 1/2" - $155 each

We are still waiting on the quote for the 14, 16, and 18 inch square targets.

Targets will come with mounting holes If you dont want mounting holes let me know.
We are going to offer the group buy for 2 weeks, then final numbers will be tallied and steel will be cut.
Let us know quantities of which shapes and sizes you would like. We will need a 25% deposit the rest due before shipping.
AR Plate is expensive and we dont want to get stuck for it if guys decide to back out at the last minute.

This will more than likely be a one time thing so if you want in get in on it.

[depopulator]

pm sent

[Dmay]

Where is this taking place? Shipping or transporting could be a deciding factor to many.....

[kaleh01]

Interested, but it would be helpful to know where these are being made for shipping purposes.

[Robmcleod82]

They are being made in Calgary, I am thinking for the local guys we could arrange pickup

[K.J.P]

Very interested in picking something up. Do you know how the AR500 is going to be cut?

[Robmcleod82]

It will be done with a laser as far as I know, the water jet would drive the price up quite a bit. The heat affected zone is only about 20 thou so there shouldn't be any need to worry about the edges chipping and whatnot