I used a Coolbot and it works great. From what I understand the Inkbird works
Well too. Make sure you insulate and vapour barrier REALLY WELL. I used R22 in the walls, vapour battier and taped all the seams, then sheeted with 2” rigid styrofoam and finally used 3/4” plywood. I then rubberized everything. The floor, walls and ceiling are all done. It’s fantastic!
In the summer I can get it down to 2 degrees in about 1/2 hour.
My only regret is not doing one sooner.
__________________
Life's too short to sweat the small stuff.
Aim Small = Miss Small
|