300 Weatherby Mag Loads with Accubonds

[IronNoggin]

Despite buzzarding 90, my Pa recently acquired another 300 Weatherby Mag Mark V (German).
He is currently working up various loads for it, and noted it is "being damn fussy".
He asked if I had run Accubonds through mine, which I have not.
But he wants to give them a try...

I recall chatting with someone from here a few years back on this topic, but despite a search I could not find that.
Nor is my aging memory reliable these days...

So, if anyone has used these and found them to be accurate, could you please share your complete recipe for the 300 WBY?
Brass, Bullet weight, Powder type and grains, Primer, COL and anything else you could think of...

Hoping here.

Nog

[whitetail Junkie]

Originally Posted by IronNoggin

Despite buzzarding 90, my Pa recently acquired another 300 Weatherby Mag Mark V (German).
He is currently working up various loads for it, and noted it is "being damn fussy".
He asked if I had run Accubonds through mine, which I have not.
But he wants to give them a try...

I recall chatting with someone from here a few years back on this topic, but despite a search I could not find that.
Nor is my aging memory reliable these days...

So, if anyone has used these and found them to be accurate, could you please share your complete recipe for the 300 WBY?
Brass, Bullet weight, Powder type and grains, Primer, COL and anything else you could think of...

Hoping here.

Nog

180 grain accubonds/IMR 7828/Nosler reloading manual online(most accurate powder/load)= success!

My 300wby is West German too.

[bubba300]

I used them with h4831sc,hornady case ,9.5 rem primers in a rem 700,very nice 1/2 in. cloverleaf.