338 edge loads

[Monsterbone]

I'm trying to find some load info for a 250gr accubond

[LongBomber]

I have an edge AI, really very little capacity gained just squared up the shoulder a bit. With the 250gr accubond I tried retumbo and H1000, I ran from 89gr up to 96gr of H1000. I can't remember the top load for Retumbo, but I was running 92.5gr as my accuracy load, nosler brass cci 250 primer.

My rifle didn't get spectacular accuracy with the 250 AB it hovered around 3/4 to 1 moa, the berger 300 shot much better for me. The 225gr ttsx also shoots well from my rifle.

[wolf308]

right on guys ,i also have an edge imp, im using the 250 SMK for target shooting but pressure should be similiar with 250 hunting bullet. im still tweaking my handloads , hoping my rifle like s the super slick 285 hornadys, but for a 250 gr bullet ive had best luck at 93.8 gr of H1000. cci 250 primers . also have a batch of federal brass fireformed to see if that runs better than my remington brass currently shooting with.

mine absoulutley wont shoot the 300s

[Monsterbone]

Great Thanks for the info I have a bunch of reloader 25 I may play with for now and some barnes 280 LRX and some 250 accubonds. I will try to post some info as I gain it

[wolf308]

oh yeah i have some rounds made up to test out that are with rl 25 with the 250s

and some other of the 285s with h1000 . was gonna wait till it got aliitle warmer.

i forgot about those, i let ya know how they shoot and how that powder shoots as well