|
02-28-2021, 05:48 PM
|
|
|
Join Date: Jul 2008
Posts: 410
|
|
Bathroom Vanity
Can anyone recommend a place for a bathroom vanity other than Home Depot, Lowes, etc. here in Calgary? Thanks!
|
02-28-2021, 06:27 PM
|
|
|
Join Date: Apr 2016
Posts: 72
|
|
I’m looking too think I might order one off wayfair. Heard good things will see I guess
Sent from my iPhone using Tapatalk
|
02-28-2021, 06:37 PM
|
|
|
|
Join Date: May 2007
Location: WMU 303
Posts: 8,493
|
|
I ordered one off amazon Same one sold in home depot was $500 more. Delivered from China. Arrived on a pallet delivered by Remier Express tractor trailer.
|
02-28-2021, 06:38 PM
|
|
|
Join Date: Jul 2012
Location: one Fort or another
Posts: 768
|
|
I'd look at that as a bit of challenge to actually make one. It's essentially a cabinet with a sink embedded in the top and plumbing running through it, yes?
My last bathroom got a standalone wall-mount sink (the best way I found to get a sink with acceptably large width proportions, and be high enough off the floor to avoid bending over all the time).
If I did it again, I'd put together a carcass of 3/4" baltic birch, high enough to be comfortable, with an unusually large drop-in sink sealed at the top. Inset slab doors on Blum hinges, 3/8" deep dado channels side & back for shelves & hidden dado for toe-board, rear dado-rabbet slab, upper bezel scored underneath with dado channel to hold left and right-side vertical panels and front skirt, ball-bearing drawers with one-piece face plates & dado-rabbet joints front and back, 3/4 oak trim on all exposed p/w edges. No nails or screws anywhere, except for hinges and handles. Brass quarter-turn ball valves on copper lines for local shutoff. Any appropriate faucet clamped into the sink hole(s).
Or something like that. I get so irritated looking at cheap particle-board slammed together with staples and pocket-screws, having tiny sinks 2 1/2 feet off the ground. But that's just me.
|
03-03-2021, 07:45 AM
|
|
|
|
Join Date: Oct 2008
Posts: 189
|
|
Costco
|
03-03-2021, 08:09 AM
|
|
|
|
Join Date: Feb 2010
Location: Red Deer
Posts: 2,629
|
|
Ikea?
|
03-03-2021, 08:29 AM
|
|
Moderator
|
|
Join Date: Jul 2008
Location: A bit North o' Center...
Posts: 11,151
|
|
There are some custom cabinet makers on Facebook Marketplace as well, may be worth a look...
|
03-03-2021, 08:30 AM
|
|
|
Join Date: May 2007
Location: Calgary
Posts: 331
|
|
Quote:
Originally Posted by Getzcold
I’m looking too think I might order one off wayfair. Heard good things will see I guess
Sent from my iPhone using Tapatalk
|
read the fine print on the Wayfair product descriptions. Many of the bathroom vanity bases are made of "solid + manufactured wood" aka particle board which is not a friendly material in a moist environment
|
03-03-2021, 09:52 AM
|
|
|
|
Join Date: Jul 2010
Location: Edmonton
Posts: 11,858
|
|
Quote:
Originally Posted by Buckwheat
read the fine print on the Wayfair product descriptions. Many of the bathroom vanity bases are made of "solid + manufactured wood" aka particle board which is not a friendly material in a moist environment
|
It precisely for that reason that I'm nervous buying something that important and expensive without eye balling it in person myself.
Seems like everything is junk nowadays .... I'd get a custom cabinet priced and it may not be as bad as you think it is.
|
03-03-2021, 10:56 PM
|
|
|
Join Date: Nov 2007
Posts: 1,307
|
|
The majority of all cabinets are made from particle or plywood core. Stuff from the old days was mostly all plywood core as well so saying cabinetry now is all crap just isn't true. It is true particle core does not like water, but why would you have standing water inside your cabinets or drawers unless something is leaking? it would wreck the cabinet no matter what its made out of. Particle core is far more stable then plywood that is why it is used most now. You are not going to find cabinets boxes that are built out of 100% solid wood, they would be astronomically priced.
There are tons of cabinet shops in Calgary, I am sure they would do something up for you as "supply only" if you want to install yourself. Also tons of small guys that do there own cabinet work that I am sure would help you out.
Support your local trades and at least if you do have an issue down the road they will deal with it for you. Good luck in getting service from Wayfair etc. if you need a replacement slide, hinge, drawer front, etc.
Last edited by Wes_G; 03-03-2021 at 11:07 PM.
|
03-04-2021, 10:27 AM
|
|
|
Join Date: Sep 2012
Posts: 6,270
|
|
Wes excellent advice, if you want high quality vanities or kitchen cabinets you need to build them from high quality wood, plywood etc along with a craftsman cabinet maker. If you want cheap particle board cabinets from Asia, try Ikea, home depot, wayfair etc.
I just cry when I see people throw out high quality oak cabinets, then replace them with white painted import junk.
|
03-04-2021, 05:18 PM
|
|
|
|
Join Date: May 2007
Location: Central Alberta
Posts: 21,399
|
|
There are tons of cabinet shops in Calgary, I am sure they would do something up for you as "supply only" if you want to install yourself. Also tons of small guys that do there own cabinet work that I am sure would help you out.
Other than the fancy fronts, you'll still get melamine faced hardboard, not a bad material in it's own right.
Grizz
__________________
"Indeed, no human being has yet lived under conditions which, considering the prevailing climates of the past, can be regarded as normal."
John E. Pfeiffer The Emergence of Man
written in 1969
|
03-04-2021, 10:35 PM
|
|
|
|
Join Date: Dec 2010
Location: Beaumont
Posts: 3,389
|
|
Costco
__________________
The kill is the satisfying, indeed essential, conclusion to a successful hunt. But, I take no pleasure in the act itself. One does not hunt in order to kill, but kills in order to have hunted. Then why do I hunt? I hunt for the same reason my well-fed cat hunts...because I must, because it is in the blood, because I am the decendent of a thousand generations of hunters. I hunt because I am a hunter.- Finn Aagard
|
03-04-2021, 11:11 PM
|
|
|
Join Date: Nov 2007
Posts: 1,307
|
|
Quote:
Originally Posted by Grizzly Adams
There are tons of cabinet shops in Calgary, I am sure they would do something up for you as "supply only" if you want to install yourself. Also tons of small guys that do there own cabinet work that I am sure would help you out.
Other than the fancy fronts, you'll still get melamine faced hardboard, not a bad material in it's own right.
Grizz
|
Yes the standard is a melamine faced particle core, You can go with a wood veneer if you want but your core options are particle, MDF or ply. There are no other options out there.
|
03-05-2021, 02:16 AM
|
|
|
Join Date: Jul 2017
Posts: 1,425
|
|
Used kitchen craft for a Reno some years ago. Can’t remember where we got the countertops.
__________________
I get all the news I need in the weather report
|
03-05-2021, 07:37 AM
|
|
|
Join Date: Jul 2015
Posts: 289
|
|
Just completed a bathroom reno in sons room. Bathroom fan is last on list.
Daughters is up next.
Wound up ordering from an ad on marketplace.
Got our colour choice, ours needing to be 33” finished. Quartz top, under mount sink, backsplash and . Dark wood grain for sons, light greyish for daughters.
Because I bought 2 $730 each.
Door and drawers soft close guides.
Very happy with quality.
Built custom .
If any one interested I can give contact.
|
03-06-2021, 09:40 AM
|
|
|
Join Date: Sep 2010
Posts: 932
|
|
Could you provide contact? thanks
|
03-06-2021, 11:14 AM
|
|
|
Join Date: Jul 2015
Posts: 289
|
|
Quote:
Originally Posted by walker1
Could you provide contact? thanks
|
Khoa 1-403-615-6798
|
03-08-2021, 02:08 PM
|
|
|
Join Date: Sep 2010
Posts: 932
|
|
thanks
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 11:45 AM.
|