Remington 1100 12 gauge shell extractor

[bustnroosters]

After 30 years of use the shell extractor failed on my 1100 and I have had a very difficult time finding a replacement. Does anyone on the forum have extras that they may be willing to sell?

It must be the original old style extractor and not the new improved one (the new ones are too thick to fit into the bolt).

I have tried numerous part stores but everyone of them seems to be sold out and I understand Remiington is file for bankruptcy so not sure when new ones will be resupplied.

Live in YYC but happy to pay postage from anywhere.

Thanks

[Pioneer2]

Gravel Agencies [Rem parts depot in Canada] Western Gun Parts in Edmonton or Stateside Numrich gun parts .

[bustnroosters]

Thanks for the feedback, unfortunately all of the suppliers you mentioned are out of stock. Western has always been my go to store but no luck this time, Hoping a gunsmith might have a few in his inventory that they might sell as getting one through a supplier isn't the answer.

[Dewey Cox]

I really hope someone takes up the torch and makes Remington parts now that Remington is tits up.

I have most of a model 58 that I bought from a member on here for parts.
Does anyone know if the extractor is the same as an 1100?
Or any other model of Remington shotgun?
The whole bolt isn't interchangeable, I did figure that out.

[fps plus]

If memory serves me correct the 58 , 870 and 1100 , 11-87 use the same extractor .

[brewster29]

Originally Posted by Dewey Cox

I really hope someone takes up the torch and makes Remington parts now that Remington is tits up.

I have most of a model 58 that I bought from a member on here for parts.
Does anyone know if the extractor is the same as an 1100?
Or any other model of Remington shotgun?
The whole bolt isn't interchangeable, I did figure that out.

That was me you got the 58 from...
I know the trigger group interchanges, as well as the stock etc.
Numrich extractor part for 58 is 325410G, part for 1100 is 325410A. I would bet they are close enough to try, maybe a bit of fitting needed.
I would also take a look at an 870 extractor...325410C, and 11-87.

Best of luck.
Bruce

[Dewey Cox]

https://dlaskarms.com/product/volqua...remington-870/

This one says it works for the 1100 as well

[sk270]

PM sent.

[bustnroosters]

Thought I would update those interested in my search for a replacement extractor. Action Guns in Vancouver have a stock of the newer model extractors but they are to wide for the old Remington's. I did find one that fit at Brownell's. It is an aftermarket one manufactured by VOLQUARTSEN and it is called an REMINGTON 870/1100 EXACT EDGE EXTRACTOR. No problem getting it shipped to Calgary just a bit pricey as everything is in USA $.

[Dean2]

Originally Posted by bustnroosters

Thought I would update those interested in my search for a replacement extractor. Action Guns in Vancouver have a stock of the newer model extractors but they are to wide for the old Remington's. I did find one that fit at Brownell's. It is an aftermarket one manufactured by VOLQUARTSEN and it is called an REMINGTON 870/1100 EXACT EDGE EXTRACTOR. No problem getting it shipped to Calgary just a bit pricey as everything is in USA $.

Glad that worked out for you and good to know where you found parts.