|
|
04-08-2020, 04:10 PM
|
|
|
|
Join Date: May 2009
Location: near Calgary
Posts: 6,651
|
|
Need a "gunsmith"? be very careful (rant) (long detailed read so you may want to skip it)
I often see posts asking for a gunsmith near ? or here? Most often myself or others can direct them to one of many great ones in alberta bc or even quebec if incredible engraving is required. I learned the hard way you really want to be careful who you trust.
Several friends on FB are friends with an individual who claimed to have a copying lathe and provided pretty good pictures of stocks he had made.
I had acquired a first year production FN trombone in 2019 and the stock was badly damaged and rough although the barrel was quite good for a 1922 rifle.
The older trombones were square tangs while newer ones are round and Irv at Western Gun only had round tangs in stock last year so I messaged this individual to see if he could make a trombone stock and he said bring it over.
I dropped it off in High river on March 17th.
Couple days later he has a picture of it all apart saying on FB that it was very dirty and rusty. almost 100 years old no surprises yet.
Few days later he called and says I hope I didnt over step my authority on this but Irv in Edmonton now has square tang in stock along with forestocks for just over $200 which is less than I could make one for so I ordered them along with a couple new screws and a return spring. No problem screws and return spring were required anyway so why not get it all in one order with flat rate postage.
Next contact from him says polishing bolt and still some little marks "do I want it jeweled to make it look nice" Very firm no from me as I am pretty sure no factory trombones in 1922 had jewelled bolts. His response was "these things are worth over $1500 in USA so we should make it nice"
I explained to him that USA prices mean nothing in Canada as John M Browning sold the trombone patent to Remington which became their model 12 .22 pump. He could not produce or distribute trombones in the USA so contacted FN in 1922 to produce them for Browning sales in Canada and australia only with FN licensed to distribute them in Europe.
I further explained because it is a first year production with low 4 digit serial # I probably paid to much as I already have $350 into a rifle that may be worth $700 so I may not be able to even have it reblued if I go over my $300 -$400 budget for restocking.
Next contact he is complaining on FB about trying to get the rifle trigger assembly back in after polishing it.
Last week he tells me on Wednesday that if it dries overnight I should be able to pick it up the next day. What drying is required on fitting a stock?
He said had to used some release agent and bedding material to get a good smooth wood to metal fit. told him in 1922 I am sure the craftsmen in Leige handcrafted stocks to fit metal perfectly without using epoxy. Told him I would try to get there the next day and send me the bill and I will EMT.
He wrote back he is not charging me for the 6 hours he tried to get the trigger assembly back in working after polishing. I asked him why he would take it apart for a restocking. His stupid comment about factory restoration left me fuming and I responded factory restorations dont use epoxy on a 100 year old rifle and internals were best left to trained gunsmiths to deal with problems when it is sent away for bluing and internals had to be removed.
Couple hours later I get a bill and email address to emt payment for $625.
I went ballistic. Dennis Davidson in BC did a fit and finish plus incredible 24 line skip line checkering for me in 2017 for $500!
Christian Lemieux in Quebec charged me $300 in 2018.
I phoned him and said he is way off mark and pricing himself right out of the market. he claimed the bill is justified as he has a solid 5.5 hours into fitting and polishing all internals at $65. per hour.
told him he could stick the rifle where the sun does not shine before I pay $625 for him to try to learn how to restock and reassemble a rifle I never asked him to take apart.
this week he said pay him for the parts he ordered with shipping of $275 plus whatever I wanted to leave him for his time. told him I would send $400 as my upper budget amount originally discussed.
Picked it up today and lines of epoxy visible where wood meets metal and the wood looks exactly like it left edmonton with no shaping to meet metal at all.
Even at $125 I paid way too much!
End rant!!
__________________
a hunting we will go!!!!!!
|
04-08-2020, 04:35 PM
|
|
|
|
Join Date: Feb 2013
Location: Stavely, AB
Posts: 785
|
|
These so called gunsmiths are basically criminals. I've had similar experiences in the past with different vendors.
|
04-08-2020, 04:55 PM
|
|
|
Join Date: Apr 2011
Location: Calgary, AB
Posts: 48
|
|
Honestly, there are great gunsmiths, and there are **** poor ones.
Seems like this guy really dicked you around and had the nerve to try and collect an outrageous invoice.
Having worked in the firearms industry for many years at both the wholesale and retail level (and having worked with some fantastic 'smiths along the way) I can absolutely say that a good smith won't charge for learning a new action or procedure. They consider it a learning opportunity and will usually let you know this beforehand. A big no-no in the industry to is go rogue and do work on a customers gun without authorization.
I just got some work done on a long range rig, and gave the smith carte blanche to do whatever he wanted. Fitting three barrels (shouldered with brakes), trigger, finishing. Invoice came to just under 2 grand and worth every single penny. Left it all up to his experience and vision and couldn't be happier.
This guy in High River seems like quite the hack.. thanks for the heads up to avoid him.
|
04-08-2020, 05:04 PM
|
|
|
Join Date: May 2010
Location: edmonton
Posts: 3,850
|
|
lesson learned...
wow this remind me of that bad taxidemy ...
|
04-08-2020, 05:17 PM
|
|
|
Join Date: May 2007
Posts: 3,957
|
|
WOW!!!
That first Taxi job in the upper left hand corner reminds me of a girl I used to know.
Always wondered where she ended up! Mystery solved!!
Drewski
|
04-08-2020, 05:51 PM
|
|
|
Join Date: Jul 2010
Location: Rocky Mnt House
Posts: 936
|
|
Yes yes and yes.
I have had similar experiences with so call gunsmiths.
One in particular was.
Remington 700 laminate stainless mountain rifle
It shot terrible right out of the box. 280 rem
I was told I should have it bedded and the trigger worked.
Ok
Paid for that.
Took to the range. Shot twice and a chunk of the stock broke out behind the safety.
I was told the Remington stocks are junk.
Ok lets do a new stock
New barrel
Chamber in 280ai
Accurize action
Remember i had all ready paid for the trigger to be reworked and the first stock to be bedded.
Well got my new gun back.
It had a camo bell and carlson stock. Bedded
JB welded sleeve on the bolt(to tighten tolerances) looked horrid
Still had the j lock
Lapped lugs
Scope mounted in tally rings(my scope)
Cost???
$3100
Plus the work from before.
Poor work for premium dollars
|
04-08-2020, 06:11 PM
|
|
|
|
Join Date: May 2009
Location: near Calgary
Posts: 6,651
|
|
This is his idea of fit and finish
Sent from my SM-G955W using Tapatalk
__________________
a hunting we will go!!!!!!
|
04-08-2020, 06:24 PM
|
|
|
Join Date: Jun 2007
Posts: 1,086
|
|
Quote:
Originally Posted by wwbirds
This is his idea of fit and finish
Sent from my SM-G955W using Tapatalk
|
Wow. **** poor.
If you’d name the ‘gunsmith’ it may save others some aggravation in the future?
|
04-08-2020, 06:26 PM
|
|
|
|
Join Date: Jan 2010
Location: Airdrie
Posts: 1,791
|
|
Wow
Oh my 😳
I just dropped mine of to someone I don't know other than recommend, holding my breath.
Now that stuffed weasle, I kinda would like him lol.
WDF
__________________
Fuel up, go for a drive, ask permission.....If you are scared, take your mom with you
Huntinstuff
|
04-08-2020, 06:28 PM
|
|
|
Join Date: Apr 2010
Location: Kamloops BC
Posts: 268
|
|
NOT so NICE fit and Finish - RJ
__________________
The 284 WIN - is the Original Short Magnum !
|
04-08-2020, 06:29 PM
|
|
|
Join Date: May 2007
Posts: 15,841
|
|
Quote:
Originally Posted by Wrongside
Wow. **** poor.
If you’d name the ‘gunsmith’ it may save others some aggravation in the future?
|
Can I guess? :-)
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
04-08-2020, 06:31 PM
|
|
|
Join Date: Aug 2010
Location: Black Creek, BC
Posts: 224
|
|
Quote:
Originally Posted by wwbirds
This is his idea of fit and finish
Sent from my SM-G955W using Tapatalk
|
Yikes. Norinco, Rossi and mystery Turkish builders put out superior fit and finish compared to that
|
04-08-2020, 06:43 PM
|
|
|
|
Join Date: Jan 2012
Location: On the border in Lloydminster
Posts: 8,364
|
|
OMG is that white stuff epoxy?
|
04-08-2020, 06:43 PM
|
|
|
|
Join Date: Feb 2010
Location: Sturgeon County, Ab.
Posts: 3,131
|
|
Send it to me.
Rob, call me or FB message me. Send me that gun, I’ll fix whatever I can for free. I owe you one, and we’ll be even.😉
__________________
Proper placement and Deep penetration are what’s important. Just like they taught in Sex Ed!
|
04-08-2020, 06:45 PM
|
|
|
Join Date: Jun 2007
Posts: 1,086
|
|
Quote:
Originally Posted by chuck
Can I guess? :-)
|
LOL. Likely get it in one.
|
04-08-2020, 07:08 PM
|
|
|
|
Join Date: May 2009
Location: near Calgary
Posts: 6,651
|
|
brutal
Sure go for it. Only giving one hint in that he was banned here after a few suspensions so gitrdun, no prize but if I go ding ding ding you got it right!
Quote:
Rob, call me or FB message me. Send me that gun, I’ll fix whatever I can for free. I owe you one, and we’ll be even.😉
|
Thanks buddy I appreciate that really. I have all the wood working tools to get rid of the epoxy if he really used a release agent between wood and metal. Can also take the excess wood off for smooth transition I just didnt bother ordering wood for this one from irv because last time I spoke to his daughter they only had round tangs in stoick so thought I had to get one made with a duplicating lather. should have just waited.
After taking it apart he couldn't put it back together so as long as I have everything in the little zip lock bag he attached to the stock and inside the receiver I am hoping by taking one of my completely restored ones apart I can see where everything goes that he messed up on trigger cross bolt safety assembly.
__________________
a hunting we will go!!!!!!
|
04-08-2020, 07:12 PM
|
|
|
Join Date: May 2007
Posts: 15,841
|
|
He couldn’t put it back together?
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
04-08-2020, 07:17 PM
|
|
|
|
Join Date: Feb 2010
Location: Sturgeon County, Ab.
Posts: 3,131
|
|
Quote:
Originally Posted by wwbirds
Sure go for it. Only giving one hint in that he was banned here after a few suspensions so gitrdun, no prize but if I go ding ding ding you got it right!
Thanks buddy I appreciate that really. I have all the wood working tools to get rid of the epoxy if he really used a release agent between wood and metal. Can also take the excess wood off for smooth transition I just didnt bother ordering wood for this one from irv because last time I spoke to his daughter they only had round tangs in stoick so thought I had to get one made with a duplicating lather. should have just waited.
After taking it apart he couldn't put it back together so as long as I have everything in the little zip lock bag he attached to the stock and inside the receiver I am hoping by taking one of my completely restored ones apart I can see where everything goes that he messed up on trigger cross bolt safety assembly.
|
I have the parts schematic and disassemble/assemble instruction. I can send you what I have if you want to tackle it, or the offer stands to give it a go. PMing you my address.
__________________
Proper placement and Deep penetration are what’s important. Just like they taught in Sex Ed!
|
04-08-2020, 07:40 PM
|
|
|
|
Join Date: May 2009
Location: near Calgary
Posts: 6,651
|
|
Quote:
Originally Posted by chuck
He couldn’t put it back together?
|
Said he spent 6 hours trying to put it back together. Everything worked when I dropped it off but I knew it needed a release spring. Now I have a baggie of spare parts
Sent from my SM-G955W using Tapatalk
__________________
a hunting we will go!!!!!!
|
04-08-2020, 08:10 PM
|
|
|
Join Date: Jul 2010
Location: Rocky Mnt House
Posts: 936
|
|
Wow
I am sure glad i did not send the exceptional piece of English walnut to him to make a stock for my 358norma
I would have been very angry had it turned out to be a expensive door stop
|
04-08-2020, 08:26 PM
|
|
|
Join Date: Dec 2008
Location: Camrose
Posts: 45,137
|
|
That is a mess, no fitting at all. The crazy part is that he did some excellent work for me, and he did it for a very reasonable price. It's hard to imagine how his work can vary so much from one job to another.
__________________
Only accurate guns are interesting.
|
04-08-2020, 08:31 PM
|
|
|
|
Join Date: Dec 2012
Posts: 1,651
|
|
The work he did on my son's rifle was p!55 poor and expensive & then he hinted for a tip! Never again!
__________________
There is no God higher than truth - Gandhi
Protect the oppressed even if an enemy, never forgive the traitor especially if he is your friend
Last edited by teledogs; 04-08-2020 at 08:42 PM.
|
04-08-2020, 08:42 PM
|
|
|
|
Join Date: Dec 2010
Location: Look behind you :)
Posts: 27,780
|
|
Which neck of the woods is this in?
LC
__________________
|
04-08-2020, 08:42 PM
|
Moderator
|
|
Join Date: Aug 2012
Location: Strathmore
Posts: 5,623
|
|
[QUOTE=wwbirds;4145777]Sure go for it. Only giving one hint in that he was banned here after a few suspensions so gitrdun, no prize but if I go ding ding ding you got it right!
I've never personally met him but I lived, worked, & played in that country for 20 years. He always bragged about his relationships with his neighbors, funny they didn't reciprocate. Stories like this one & even worse were common around him then.
__________________
If you're not a Liberal when you're young, you have no heart. If you're not a Conservative when you're old, you have no brain. Winston Churchill
You can, you should, & if you're brave enough to start, you will. Stephen King
|
04-08-2020, 09:40 PM
|
|
|
Join Date: Mar 2016
Posts: 25
|
|
Quote:
Originally Posted by elkhunter11
That is a mess, no fitting at all. The crazy part is that he did some excellent work for me, and he did it for a very reasonable price. It's hard to imagine how his work can vary so much from one job to another.
|
Ever see the movie "Arthur" with Dudley Moore?
|
04-08-2020, 09:44 PM
|
|
|
|
Join Date: Jan 2010
Location: Airdrie
Posts: 1,791
|
|
Quote:
Originally Posted by Lefty-Canuck
Which neck of the woods is this in?
LC
|
From his post:
dropped it off in High river on March 17th.
__________________
Fuel up, go for a drive, ask permission.....If you are scared, take your mom with you
Huntinstuff
|
04-08-2020, 11:05 PM
|
Banned
|
|
Join Date: Jan 2017
Posts: 182
|
|
If it's the same guy who advertises on town post......not surprised. Learning lessons.
|
04-08-2020, 11:34 PM
|
|
|
|
Join Date: Feb 2012
Location: Blackfalds
Posts: 6,948
|
|
Was this gunsmith a member on here? I’m not big into the gunsmithing world so I don’t know who’s around.
__________________
Trudeau and Biden sit to pee
|
04-09-2020, 05:48 AM
|
|
|
Join Date: Nov 2016
Location: Edmonton
Posts: 6,496
|
|
Quote:
Originally Posted by DiabeticKripple
Was this gunsmith a member on here? I’m not big into the gunsmithing world so I don’t know who’s around.
|
See post 16 above.
__________________
You matter. Unless you multiply yourself by the speed of light squared... ...then you energy.
|
04-09-2020, 06:14 AM
|
|
Gone Hunting
|
|
Join Date: Sep 2010
Location: North of Peace River
Posts: 11,346
|
|
Is his name Andrew?
Sure sounds like a guy who set himself up as a gunsmith in Manning about twenty years ago. He also claimed to be an engineer, he was neither.
Dad got him to work on a almost new Ski Doo, he made it worse.
One of my friends took a rifle to him that had been abused and wasn't safe to use. It would fire as you closed the bolt. After spending $400.00 and two trips to get it repaired that friend brought it to me.
I offered to do a trade and he jumped on it, so that gun is now mine, and has worked faithfully for me since I repaired it. My cost, $0.00
The tang was slightly bent and the stock cracked. Took me less then an hour to figure it out and fix both.
Last I heard Andrew had moved south somewhere. Sounds like you found him.
Word of warning, anyone can claim to be a gunsmith, or just about any tradesman. That don't make it so.
Always ask to see Accreditation.
I've learned that lesson the hard way.
Also, be on your guard if a repairman starts boasting. The good ones don't need to boast.
__________________
Democracy substitutes election by the incompetent many for appointment by the corrupt few.
George Bernard Shaw
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 09:20 AM.
|