Playing with this this weekend, acquired some Skyfly feeder heads. They use a pushnut which does not easily come off, and is not easy to get at to cut off, and the knuckle doesn't come off the shaft nicely either. So, there has to be an easier way to do this anyway, other than take this or any other deke apart, and reassemble them all. Came up with this, need sidecutters and a drill and some tie wraps. Could even put in shoelace eyes or something of that ilk to reinforce the holes possibly, soft material though. But, it seems to work OK this way.
__________________
You should also be a member;
CCFR
CSSA