|
07-08-2019, 10:13 AM
|
|
|
Join Date: Jul 2019
Posts: 4
|
|
Stock Fixes
I have an old Parker Hale 30-06 and right behind the receiver, there’s a crack about 1.5 inches long but very shallow. I’m paranoid if I use it again, it would just splinter and cause a lot of pain. I used gorilla glue in it, duck taped it for 3 days to glue could cure and it seems to be good now. Anyone else use gorilla glue to fix their stock? It’s an oldie, so more than likely the wood just dried out (won’t let me upload a photo currently sorry!)
Sent from my iPhone using Tapatalk
|
07-08-2019, 11:02 AM
|
|
|
|
Join Date: Jan 2013
Location: East
Posts: 2,065
|
|
Not sure about gorilla glue but if you can get your hands on some accraglass and get it in under the crack you can glue that sucker back tight. If the glue is holding it tight for now I would just shoot it and keep a close eye on it. If the bond does not hold or the crack gets bigger stop right away and get some better glue.
__________________
HOLD ON FUR!
For my coyote pics @trophy_country_coyotes on instagram
life's too short to fish nymphs
|
07-08-2019, 11:04 AM
|
|
|
|
Join Date: Dec 2008
Location: Near Edmonton
Posts: 15,049
|
|
You have to take the gun out of the stock and see just how deep the crack goes into the wood. If it really is just a surface crack due to the wood drying and crazing then Gorrila glue is fine. Most of the Parker Hales I have fixed, like so many Mauser actions, that crack goes a lot deeper than just the surface. For those, glass in a pillar in the rear screw hole, glass the tang, recoil lug and front screw. That will do a permanent fix as the crack is caused by the action moving in the stock on recoil. Gorilla glue spackled on top will not fix the problem.
|
07-08-2019, 03:49 PM
|
|
|
Join Date: Jul 2019
Posts: 4
|
|
Quote:
Originally Posted by Dean2
You have to take the gun out of the stock and see just how deep the crack goes into the wood. If it really is just a surface crack due to the wood drying and crazing then Gorrila glue is fine. Most of the Parker Hales I have fixed, like so many Mauser actions, that crack goes a lot deeper than just the surface. For those, glass in a pillar in the rear screw hole, glass the tang, recoil lug and front screw. That will do a permanent fix as the crack is caused by the action moving in the stock on recoil. Gorilla glue spackled on top will not fix the problem.
|
I am afraid if I take it out of the stock or get to a smith and do it, it won’t be repairable as I want to keep it original. Although what you’re saying, I definitely would feel safer with doing it the way you explained. It didn’t look that deep when I took a magnifying glass to it, but underneath I’m not sure. I appreciate your help!
Sent from my iPhone using Tapatalk
|
07-08-2019, 06:13 PM
|
|
|
|
Join Date: Dec 2008
Location: Near Edmonton
Posts: 15,049
|
|
Quote:
Originally Posted by TylerMB
I am afraid if I take it out of the stock or get to a smith and do it, it won’t be repairable as I want to keep it original. Although what you’re saying, I definitely would feel safer with doing it the way you explained. It didn’t look that deep when I took a magnifying glass to it, but underneath I’m not sure. I appreciate your help!
Sent from my iPhone using Tapatalk
|
Until they crack in two aand even then they are repairable. It will be easier and cheaper to fix it properly now than if it gets worse from shooting it some more. Where are u located? .
|
07-08-2019, 07:00 PM
|
|
|
Join Date: Nov 2009
Location: East Central Alberta
Posts: 8,315
|
|
I have a Marlin 336 with a “split” that developed behind the tang. I “opened” up the crack with a fine (hacksaw) blade and filled the void with bedding compound. Seemed to have worked fine. I was going to add a cross countersink brass rivet just to be on the safe side, but it was not needed.
__________________
Old Guys Rule
|
07-08-2019, 07:30 PM
|
|
|
Join Date: Jul 2019
Posts: 4
|
|
Quote:
Originally Posted by Dean2
Until they crack in two aand even then they are repairable. It will be easier and cheaper to fix it properly now than if it gets worse from shooting it some more. Where are u located? .
|
I’m in Blackfalds
Sent from my iPhone using Tapatalk
|
07-08-2019, 07:37 PM
|
|
|
|
Join Date: Dec 2008
Location: Near Edmonton
Posts: 15,049
|
|
http://www.hillbillyarms.com/
If u aren't sure or confident fixing it give him a call. He can repair it. Dan does very good work at reasonable prices.
Last edited by Dean2; 07-08-2019 at 07:43 PM.
|
07-11-2019, 11:08 AM
|
|
|
Join Date: Jul 2019
Posts: 4
|
|
Quote:
Originally Posted by Dean2
http://www.hillbillyarms.com/
If u aren't sure or confident fixing it give him a call. He can repair it. Dan does very good work at reasonable prices.
|
I’ll definitely keep him in mind, thank you!
Sent from my iPhone using Tapatalk
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 06:52 PM.
|