Go Back   Alberta Outdoorsmen Forum > Main Category > Guns & Ammo Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 02-12-2018, 08:21 AM
Cdub77 Cdub77 is offline
 
Join Date: Feb 2018
Posts: 5
Default New guy wanting a break.

Been shooting for decades at this point just usually with friends and families guns.

Recently picked up a rem 783 SA 308 in an mdt stock.

But the bare barrel looks out of place to me so I'm wondering how involved it is to a decent break on it.

Not looking for a clamp on. Seen a couple blow off at the range and I don't want to be that guy.

Is it something that can be done at home with a set of good quality dies and a vice? Since most use a locknut, indexing doesn't have to be too exact I assume.

If it's best to leave it to a Smith any have suggestions for the South alberta area?

Any favorite brands./styles that are easy choices?
Reply With Quote
  #2  
Old 02-12-2018, 08:34 AM
Pathfinder76 Pathfinder76 is offline
 
Join Date: May 2007
Posts: 15,768
Default

You are putting on a brake for looks?
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”

-Billy Molls
Reply With Quote
  #3  
Old 02-12-2018, 08:35 AM
fish_e_o fish_e_o is offline
Banned
 
Join Date: Jan 2010
Location: rollyview
Posts: 7,860
Default

Quote:
Originally Posted by Cdub77 View Post
Is it something that can be done at home with a set of good quality dies and a vice? Since most use a locknut, indexing doesn't have to be too exact I assume.

If it's best to leave it to a Smith any have suggestions for the South alberta area?
you have to align it to the bore not the outside of the barrel. i would say it's best done in a lathe and without a die.
Reply With Quote
  #4  
Old 02-12-2018, 08:38 AM
elkhunter11 elkhunter11 is online now
 
Join Date: Dec 2008
Location: Camrose
Posts: 44,831
Default

If you really want a break in the barrel, do it yourself. Lay the end of the barrel on an anvil, get a 12lb sledgehammer and wail away, and a break should result.
__________________
Only accurate guns are interesting.
Reply With Quote
  #5  
Old 02-12-2018, 08:52 AM
Cdub77 Cdub77 is offline
 
Join Date: Feb 2018
Posts: 5
Default

Quote:
Originally Posted by chuck View Post
You are putting on a brake for looks?
Small part is for looks.
Major reason is I like a heavy gun and low recoil.
Bonus points for extra loudness.
Reply With Quote
  #6  
Old 02-12-2018, 08:55 AM
double gun double gun is offline
 
Join Date: Mar 2008
Location: Alberta
Posts: 4,279
Default

No. Please don’t attempt this at home in your vice with a die.
-The threads need to be concentric with the bore
-the threads need to be properly fit to the brake
-once installed the brake should be single point bored to assure proper concentricity to the bore, and taken to the proper diameter for the intended caliber.

As for someone down south, I would see if Rob McLeod would do it. (He is a member on here)
Reply With Quote
  #7  
Old 02-12-2018, 08:57 AM
Northwinds Northwinds is online now
 
Join Date: Jan 2013
Posts: 425
Default

Remember the bonus for extra loudness part when you can't hear anything without getting it repeated if a few years.If you have to have a heavy gun,put weight in the stock but stay away from a break!!!
Reply With Quote
  #8  
Old 02-12-2018, 10:28 AM
fps plus fps plus is offline
 
Join Date: Sep 2015
Posts: 1,815
Default

Thread on muzzle brakes have the barrels thread for the brake cut on a lathe . The brakes hole must be concentric with the bore to keep the bullet from hitting the brake. There is usually only .020 thousandths clearance between the bullet and bore diameter of the brake. Not much room for error.
Reply With Quote
  #9  
Old 02-12-2018, 11:26 AM
ghostguy6's Avatar
ghostguy6 ghostguy6 is offline
 
Join Date: Apr 2009
Location: edmonton
Posts: 3,116
Default

Quote:
Originally Posted by Northwinds View Post
Remember the bonus for extra loudness part when you can't hear anything without getting it repeated if a few years.If you have to have a heavy gun,put weight in the stock but stay away from a break!!!
x2

On a .308 the recoil is minimal so by installing a break all you are doing is annoying all the other shooters around you.
__________________
" Everything in life that I enjoy is either illegal, immoral, fattening or causes cancer!"

"The problem was this little thing called the government and laws."
Reply With Quote
  #10  
Old 02-12-2018, 12:05 PM
Nyksta Nyksta is offline
 
Join Date: Dec 2014
Location: Calgary
Posts: 1,543
Default

Quote:
Originally Posted by Cdub77 View Post
Small part is for looks.
Major reason is I like a heavy gun and low recoil.
Bonus points for extra loudness.
Extra loudness does no favors for anyone. Your ears will hate it. The people next to you will hate it. The antigunners who already complain about noise from gun ranges will only be aggravated to complain more.

Dont get a muzzle brake for the sake of being extra annoying
Reply With Quote
  #11  
Old 02-12-2018, 12:07 PM
Ryan.M.Anderson Ryan.M.Anderson is offline
 
Join Date: Dec 2012
Posts: 0
Default

Rob can certainly do this for you and at a good price.

Lots of reasons to get a brake - wanting one is good enough for me.

Some of the designs out these days are actually much less intrusive on other shooters than some of the older brakes. When I RO at matches I always take an extra step or two back when someone with an APA brake is on the line.

I also have a buddy who makes great self indexing brakes. I have 2 on my match guns currently and am getting one of his new magnum brakes as well.

PM me if you need to know how to get a hold of Rob.
Reply With Quote
  #12  
Old 02-12-2018, 12:28 PM
223MB 223MB is offline
Banned
 
Join Date: Oct 2017
Location: Edm
Posts: 418
Default Re finishing a wingmaster

Edited. Posted in wrong thread
Reply With Quote
  #13  
Old 02-12-2018, 12:40 PM
6.5 shooter's Avatar
6.5 shooter 6.5 shooter is offline
 
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,205
Default

Break = noise
noise= pain
pain=body reacting to pain
Body reacting to pain= involuntary muscle reaction
Involuntary muscle reaction= rifle/sight picture not on target at trigger squeeze
Rifle/sight picture not on target at trigger squeeze=missing target
Missing target=frustration, leading to even more bad habits....and on and on and on......
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
Reply With Quote
  #14  
Old 02-12-2018, 12:50 PM
Ryan.M.Anderson Ryan.M.Anderson is offline
 
Join Date: Dec 2012
Posts: 0
Default

Quote:
Originally Posted by 6.5 shooter View Post
Break = noise
noise= pain
pain=body reacting to pain
Body reacting to pain= involuntary muscle reaction
Involuntary muscle reaction= rifle/sight picture not on target at trigger squeeze
Rifle/sight picture not on target at trigger squeeze=missing target
Missing target=frustration, leading to even more bad habits....and on and on and on......
So you have never seen or heard of a Precision Rifle Series match?

Brakes are not for everyone but they have a place. When I am trying to get 12 rounds off in 90 seconds at 3 difference distances a brake can be a big help.

Also, brakes, when used properly, can help the shooter spot their own shots and get shot corrections on their own which will allow them to make hits on their next shots.
Reply With Quote
  #15  
Old 02-12-2018, 01:59 PM
bat119's Avatar
bat119 bat119 is offline
 
Join Date: Jan 2012
Location: On the border in Lloydminster
Posts: 8,342
Default

Never mention brake on AO try over on CGN the crowd there is more open minded
Reply With Quote
  #16  
Old 02-12-2018, 05:43 PM
YoteStopper's Avatar
YoteStopper YoteStopper is offline
 
Join Date: Jun 2011
Location: Southern Alberta
Posts: 825
Default

Take it to a smith and have it threaded properly. Some brakes need to be indexed, the smith can do this as part of the setup.

I had a Precision Armament M11 put on my .300WM, it cut recoil significantly but is not quite so range friendly anymore due to extreme muzzle blast.
__________________
Fight for the right to be free, never be owned.
-Manowar
Reply With Quote
  #17  
Old 02-12-2018, 07:10 PM
fps plus fps plus is offline
 
Join Date: Sep 2015
Posts: 1,815
Default

I have put brakes on for guys in caliber 223 ,22-250 220 swift , 243. . Not for the recoil but to reduce muzzle jump so they can see bullet impact. Very effective
Reply With Quote
  #18  
Old 02-12-2018, 08:04 PM
HowSwedeItIs HowSwedeItIs is offline
 
Join Date: Jun 2014
Location: Out on the Edge of the Prairie
Posts: 1,089
Default

Quote:
Originally Posted by fps plus View Post
I have put brakes on for guys in caliber 223 ,22-250 220 swift , 243. . Not for the recoil but to reduce muzzle jump so they can see bullet impact. Very effective
I’ve heard that even doubling up with hearing protection isn’t enough to avoid permanent damage, is that true?
Reply With Quote
  #19  
Old 02-13-2018, 07:41 AM
shorty shorty is offline
 
Join Date: Aug 2007
Posts: 265
Default

MCRS Tactical in Calgary also installs breaks. He has a few options and the rifles I have shot with his breaks on work really well.
Reply With Quote
  #20  
Old 02-13-2018, 07:45 AM
owlhoot's Avatar
owlhoot owlhoot is offline
 
Join Date: Dec 2007
Location: southeast alberta
Posts: 1,176
Default

The guys at the gun range will all be saying
"Give me a BREAK""""
Reply With Quote
  #21  
Old 02-13-2018, 07:51 AM
Beeman3 Beeman3 is offline
 
Join Date: Nov 2015
Posts: 536
Default

Quote:
Originally Posted by HowSwedeItIs View Post
I’ve heard that even doubling up with hearing protection isn’t enough to avoid permanent damage, is that true?
I've read that also. Has not been my experience. I hear of guys saying that the noise and blast is so bad with ear plugs or muffs in. I just find that hard to believe. Most of my guns have brakes and I shoot them with foam plugs, muffs and now electronic noise canceling ear plugs. I don't mean I use these all at the same time either. No guns are loud when I have hearing protection in from 300 RUM down to 6.5X47's. Sure is fun watching your bullets hit the gongs. So to each there own, if you like brakes then by all means use them. As far as guys doubling up and saying how loud brakes are with plugs in and muffs; never experienced that and have been around a number of different brakes.
Reply With Quote
  #22  
Old 02-13-2018, 09:00 AM
aardvaark aardvaark is offline
 
Join Date: May 2015
Location: Lacombe, AB
Posts: 482
Default

I had a break on my 338 and I opted to put some weight in my stock and remove the break. Now it's much easier to shoot and the neighbours are friendlier too.

If you're doing the majority of your shooting at the range, I'd go with the weight in the stock and save the expense of the brake.
Reply With Quote
  #23  
Old 02-13-2018, 09:17 AM
cody c cody c is offline
 
Join Date: Apr 2011
Posts: 1,032
Default

Put a grizzly noise re-director on it, they look really good and deflect noise forward, you would need a smith to install it, and they cost more than a regular brake, but would be worth it IMO.
__________________
feeding the occasional troll.
Reply With Quote
  #24  
Old 02-13-2018, 10:44 AM
Jayhad Jayhad is offline
 
Join Date: Jul 2011
Posts: 2,049
Default

ATRS installs a very nice and effective brake for a reasonable price.
Reply With Quote
  #25  
Old 02-13-2018, 10:48 AM
HowSwedeItIs HowSwedeItIs is offline
 
Join Date: Jun 2014
Location: Out on the Edge of the Prairie
Posts: 1,089
Default

Good to know, interesting
Reply With Quote
  #26  
Old 02-13-2018, 01:52 PM
Trochu's Avatar
Trochu Trochu is offline
Moderator
 
Join Date: Feb 2015
Posts: 7,591
Default

Quote:
Originally Posted by Nyksta View Post
The antigunners who already complain about noise from gun ranges will only be aggravated to complain more.
Pretty sure the break doesn't make the gun any louder, just redirects the sound....
Reply With Quote
  #27  
Old 02-13-2018, 02:04 PM
fish_e_o fish_e_o is offline
Banned
 
Join Date: Jan 2010
Location: rollyview
Posts: 7,860
Default

Quote:
Originally Posted by Trochu View Post
Pretty sure the break doesn't make the gun any louder, just redirects the sound....
redirects all that yummy lead. i do love me some lead exposure in my lungs.
Reply With Quote
  #28  
Old 02-13-2018, 02:13 PM
Ryan.M.Anderson Ryan.M.Anderson is offline
 
Join Date: Dec 2012
Posts: 0
Default

Quote:
Originally Posted by Trochu View Post
Pretty sure the break doesn't make the gun any louder, just redirects the sound....
Yep, if you think that brakes make guns louder you must not believe in physics.

They seem louder but it is only because the noise is being directed to the sides or sides and back than forward. Anyone standing near or on may be able to tell the difference but anyone not on the range is not going to be able to tell.

To the OP, maybe head over to CGN you may get a better response as someone has previously stated. There has been a lot of change in the muzzle brake market over the last couple years and some of the original (and somewhat legitimate) concerns of backblast and ground disturbance have been for the most part resolved.
Reply With Quote
  #29  
Old 02-13-2018, 08:25 PM
tullfan's Avatar
tullfan tullfan is offline
 
Join Date: Aug 2009
Location: Calgary, Ab
Posts: 982
Default

Quote:
Originally Posted by fish_e_o View Post
redirects all that yummy lead. i do love me some lead exposure in my lungs.
I think it only redirects that yummy lead when you install your brake in a vise with a die and get the hole mostly inline with the bore. The brake will take off what bullet parts do not quite fit. Sheesh, dont you guys know anything.
Tullfan
Reply With Quote
  #30  
Old 02-13-2018, 08:35 PM
Big pete's Avatar
Big pete Big pete is offline
 
Join Date: Dec 2012
Location: Millarville,alberta
Posts: 493
Default

Quote:
Originally Posted by shorty View Post
MCRS Tactical in Calgary also installs breaks. He has a few options and the rifles I have shot with his breaks on work really well.
X2 I have the mcrs whisperer brake on my 270wsm and it works great ....very little recoil and I am able to spot my own shots, be forewarned hearing protection is required all the time
__________________
Ya just go out n ya give'r
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 08:54 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.