|
03-01-2013, 06:06 PM
|
|
|
Join Date: Feb 2013
Posts: 18
|
|
Ammo for my Remington 742 Bushmaster Semi Auto
does anyone have advise on which bullets would work best for my gun ?
|
03-02-2013, 09:41 AM
|
|
|
|
Join Date: May 2007
Location: WMU 214
Posts: 1,817
|
|
Ammo
Well that would depend on what you were shooting? Are you hunting, target shooting, do you reload or buy commercial loaded? Most anything in your specific caliber will work, it depends on your application.
|
03-02-2013, 09:45 AM
|
|
|
|
Join Date: May 2007
Location: Dreadful Valley
Posts: 14,608
|
|
Stick to cartridges marked the same as the stamping on the firearm.
Since every firearm is unique unto its self, there is no go try this magical loading out there.
Trigger time is time well spent.
Tight groups.
__________________
There are no absolutes
|
03-02-2013, 01:58 PM
|
|
|
Join Date: Feb 2013
Posts: 18
|
|
I will be target shooting and deer hunting mainly. Ive hunted for quite a few years but was always with a buddy. I never carried a rifle or shot much of anything but learned quite a bit just being in the woods. The times I went alone I would bring my friends 30 30, but the only thing I ever shot were pics on my camera lol. Maybe I just need to figure this out on my own but if you guys have suggestions for targets, and white tail deer, it would be appreciated.
|
03-02-2013, 06:36 PM
|
|
|
Join Date: May 2007
Location: Calgary
Posts: 5,144
|
|
If it's a 742 it isn't a Bushmaster, Woodsmaster maybe? If it is a Bushmaster AR type it is restricted and can't be used for hunting. I owned a 742 in 30-06 many years ago and it wasn't fussy on what kind of ammo so I used cheapy federal until I got into reloading. That gun shot very well.
__________________
Former Ford Fan
|
03-02-2013, 09:29 PM
|
|
|
Join Date: Feb 2013
Posts: 18
|
|
Yes sorry it's a Woodsmaster. Its my grandpa's gun and just got it. He past away 10 years ago and I just got it from my uncle. It is in immaculate condition so I'm hoping it shoots the same and have no problems with it jamming. Thats why I was wondering about the ammo. From what I've heard about that model it has a pretty good track record. I do realize every gun is different but just thought maybe that model was prone to jamming certain ammo.
|
03-02-2013, 10:18 PM
|
|
|
Join Date: Feb 2013
Posts: 18
|
|
Also, this may be a stupid question.........very stupid......but when I'm ready to buy a scope for my gun, can I bring it to Cabela's and get someone to put a scope of my choice on so I can see it on the gun ? Or do I just have to buy one and hope I like it after its on the rifle. The rifle is already bored out for a scope.
|
03-02-2013, 11:17 PM
|
|
|
Join Date: Nov 2007
Location: S.E. British Columbia
Posts: 4,579
|
|
742 Woodsmaster
Before spending money on a scope for it, check the top of the receiver to make sure the metal up in there is not all marred up with chatter marks. Check the bolt head for wear, galling. These wear patterns are common on many 742s Eventually the action seizes up. That's the main weakness of the 742.
The same rifle in pump action is much more reliable and known to be much more accurate.
edit: no shop will allow you to put a new scope on top of your rifle.
|
03-02-2013, 11:42 PM
|
|
|
Join Date: May 2007
Location: Calgary
Posts: 5,144
|
|
Quote:
Originally Posted by twofifty
edit: No shop will allow you to put a new scope on top of your rifle.
|
wtf?
__________________
Former Ford Fan
|
03-03-2013, 07:30 AM
|
|
|
|
Join Date: Jul 2010
Location: Rocky Mt. House
Posts: 1,829
|
|
Quote:
Originally Posted by Unregistered user
wtf?
|
If its mounted its used when i buy new i like to know it hasnt been tryed out by others first
|
03-03-2013, 12:13 PM
|
|
|
Join Date: Feb 2013
Posts: 18
|
|
whats the receiver ? the holes for mounting the scope ? the whole gun was reconditioned 10 or more years ago and i'd be surprised if it was ever shot since then, so i should be fine in the wear department.
|
03-03-2013, 05:15 PM
|
|
|
|
Join Date: Nov 2012
Posts: 63
|
|
Woodmaster
For handloads suggest RCBS Small Base Dies
30-06
IMR 4895 @ 47.0
WW brass and Fed 210 primers
180gr nosler BT or Part
The 742 Auto Woodmaster make sure you keep the chamber area real clean.
Accuracy is Ok for wood ranges.
__________________
Jeff
North Pole, Alaska
|
03-03-2013, 09:38 PM
|
|
|
Join Date: Nov 2007
Location: S.E. British Columbia
Posts: 4,579
|
|
rusty, the receiver is the large smooth-sided blued metal part that hold the bolt assembly, the bolt rails, the magazine and the trigger assembly. The ejection port is machined out of the receiver. The barrel is threaded into the receiver, and the action bars protrude forward out of it.
In a bolt-action gun, the receiver is called the action. It too holds the bolt, bolt rails, magazine, trigger assembly, barrel. The action is often open at the top & sides, sometimes closed with an ejection port.
Look for chatter marks inside the receiver: remove the mag, flip the rifle upside down, pull and manually hold the bolt back (it won't lock back without the mag in place), then look at the top (or underside) for chatter marks.
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 04:29 PM.
|