|
09-25-2022, 08:03 PM
|
|
|
Join Date: Nov 2009
Posts: 1,413
|
|
Push Pins
Need to remove the inner fender wells on my truck. Looking on line I think there called push pins?
I see two different sizes or the claw part of the tool appears bigger on one.
Any experience with these?
|
09-25-2022, 08:13 PM
|
|
|
Join Date: Apr 2009
Location: Bonnyville
Posts: 417
|
|
Pull the small (center piece) up, then pry the outer piece completely out. The center piece is the wedge that holds everything in place. It does not matter if you pull the center piece all of the way out, but it has to go it a certain way because of the offset tabs. Hope this helps.
|
09-25-2022, 08:30 PM
|
|
|
Join Date: Dec 2011
Location: East Kootenays, BC
Posts: 1,188
|
|
I have done a crap load of these. You are absolutely going to break a few of the little buggers. They seem to get brittle with age, or the stem packs up with mud... Your local car dealer will want to charge you $3-4 each! Buy an assortment or kit of your size from Amazon for $20 and get the fork removal tool which makes the job a whole lot easier.
|
09-25-2022, 09:07 PM
|
|
|
Join Date: Nov 2009
Posts: 1,413
|
|
looking on line they have a 30deg and 80 degree push pin pliers.
2010 GM.Assuming 30deg will work?
Are all PP the same?
Thanks.
|
09-26-2022, 12:52 AM
|
|
|
Join Date: Jan 2015
Location: Tagish, Yukon Terr & Peace River, Alberta
Posts: 389
|
|
Penetrating oil and compressed air work wonders. Give the pins a shot of weasel **** and then blast them clean with your blow gun. That should free up the ones with a prayer of coming out, and they can typically be removed with a flat head screwdriver and some angled side-cutters with a gentle touch.
Inevitably some will fail. Napa stocks little plastic bags with replacement pins - usually 10 to a pack. Bring one of the surviving pins with you to help match them correctly.
|
09-26-2022, 04:37 AM
|
|
|
Join Date: Jul 2017
Posts: 1,463
|
|
This is a case where I would head down to piknpull to explore the process, and gather parts. Fasteners may not be reusable, but it may help to create a plan.
__________________
I get all the news I need in the weather report
|
09-26-2022, 06:34 AM
|
|
|
|
Join Date: Jul 2010
Location: Whitecourt
Posts: 7,024
|
|
My experience with them has been to make sure you use the totally wrong tool, like a side cutters or Leatherman, chew the crap out of the heads and then end up cutting them off and replacing with new anyways.
You can buy new ones at NAPA super cheap compared to buying them from the dealer
Sent from my SM-G781W using Tapatalk
|
09-26-2022, 08:40 AM
|
|
|
Join Date: Sep 2021
Posts: 4,287
|
|
NAPA seems to have a good inventory of plastic fasteners, it's made me a lot more careless.
Grizz
__________________
Woe unto them that join house to house, that lay field to field, till there is no place, that they be alone in the midst of the Earth.
Isaiah 5:8
|
09-26-2022, 09:20 AM
|
|
|
|
Join Date: May 2007
Location: WMU 214
Posts: 1,835
|
|
right tool for the job
Trim tool is the proper tool to use.
I thk I paid 6 bucks at P Auto for one.
|
09-26-2022, 05:50 PM
|
|
|
Join Date: Nov 2009
Posts: 1,413
|
|
Got the tool today,removed the inner wheel well in minutes and didn't break any pins.
|
09-27-2022, 08:01 PM
|
|
|
|
Join Date: Jul 2010
Location: Edmonton
Posts: 11,933
|
|
Quote:
Originally Posted by Tungsten,
Got the tool today,removed the inner wheel well in minutes and didn't break any pins.
|
You didn't break ANY pins? that must be like winning the lottery !!!!!
|
09-27-2022, 08:31 PM
|
|
|
Join Date: Oct 2018
Location: Stony Plain
Posts: 274
|
|
Quote:
Originally Posted by EZM
|
Lol, I concur! Good job Tungsten.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 02:05 PM.
|