Yeah tell me about it. I just had the limbs changed out of my invasion and bought new arrows to match. After shooting for a bit my bow started to not feel right. Turnes out that the cable is rubbing on the bottom cam and has worn down the serving. I brought it to a bow tech where I was on vacation and he did the bare minimum let alone anything to tune it.
Yesterday I went to the range to try to broadhead tune and it's shooting low and left by a few feet. So I started a little research on the proper tuning technique for an invasion. I leveled my riser on the table and discovered that my top cam is a full bubble low, my bottom cam has the bubble flatned to one side and the top draw stop is well behind the bottow at full draw.
I might have to look at building a press.
|