Good Day All,
This is for any boat fix it experts, I have a 92 Lund 1660 Pro-V, the Circ pump has gone out on my live well, does anyone have a clue how to get at it as I believe it is just outside the livewell where it pulls the water from?
It seems almost impossible I think?
Thanks in advance.
Thanks Troller,
For sure my Bilge pump is there, and my livewell fill pump is there as well, replacing fill pump also, but circ pump has me puzzled, will try your suggestion, thanks.
The circulation switch on my old Crestliner was right at the bow along with the live well light so I am assuming the pump had to accessed from somewhere up front. Looked like I would most likely had to remove some of the flooring to get to that critter.
I am beginning to wonder if you might have to get to it by removing some floor right around the live well., or maybe you can lift the live well out and there she be.
I have the same boat and mine went out also years ago. At the time it looked like a big job getting at it. So since then it has been a dead well. I leave the plug out, which fills it with water. Remove my stored downriggers from it went I catch a keeper size fish I want to eat and good enough.
The circulation switch on my old Crestliner was right at the bow along with the live well light so I am assuming the pump had to accessed from somewhere up front. Looked like I would most likely had to remove some of the flooring to get to that critter.
I am beginning to wonder if you might have to get to it by removing some floor right around the live well., or maybe you can lift the live well out and there she be.