AR 500 targets - Page 5

toomanyhobbies · #**121** 02-28-2013, 08:04 PM

Picked mine up from Jordan last night, they look good.

Thanks again to the guys who put this together, you are good people!

Lefty-Canuck · #**122** 02-28-2013, 08:31 PM

Everyone who messaged me I have picked up your targets and they will be in Edmonton tonight.

LC

depopulator · #**123** 03-01-2013, 05:30 PM

Thanks for stepping up and doing this JS. And thanks LC for picking up the gongs for us in Alberta's best City

. The likes of you two are what makes AO great. Cheers.

Lefty-Canuck · #**124** 03-01-2013, 06:21 PM

Quote:

Originally Posted by depopulator

Thanks for stepping up and doing this JS. And thanks LC for picking up the gongs for us in Alberta's best City

. The likes of you two are what makes AO great. Cheers.

No worries! Like Jordan and I were talking about last night....the more we encourage responsible shooters to participate in something we all enjoy the better.

I just feel sorry for all the truck drivers I inadvertently blasted my low beams into their eyes last night on the way home.....that steel in the back of my vehicle was causing it to ride a bit funny....

I got flashed a lot more than usual....and not the good kind of flashing either...

LC

Jordan Smith · #**125** 03-04-2013, 11:06 PM

Bump. Any other stragglers who want some steel, let me know.

There are still a few guys who haven't contacted me about picking up their targets. If you haven't already, get in touch with me to arrange pickup.

1000yards · #**126** 03-04-2013, 11:45 PM

Is there any one interested in the 2nd round from Red Deer at all? I wont be going down that way anytime soon, but I would be happy to pitch in for gas costs.

Also can anyone attest how these hold up against a 308 to determine what thickness Id need?

Lefty-Canuck · #**127** 03-04-2013, 11:46 PM

Quote:

Originally Posted by 1000yards

Is there any one interested in the 2nd round from Red Deer at all? I wont be going down that way anytime soon, but I would be happy to pitch in for gas costs.

Also can anyone attest how these hold up against a 308 to determine what thickness Id need?

A 338 Lapua doesn't hardly make a dent from what Jordan was telling me....

LC

Jordan Smith · #**128** 03-05-2013, 12:04 AM

Quote:

Originally Posted by 1000yards

Is there any one interested in the 2nd round from Red Deer at all? I wont be going down that way anytime soon, but I would be happy to pitch in for gas costs.

Also can anyone attest how these hold up against a 308 to determine what thickness Id need?

3/8" will be more than enough for you.

Lefty-Canuck · #**129** 03-05-2013, 07:35 AM

Can the guys I picked targets up for reply to this thread with what your order was?

I have dropped off Depopulator's....

Just so I know how to separate who gets what.

Please reply to the thread my inbox is almost full.

Thanks!

cornuteo · #**130** 03-05-2013, 12:57 PM

LC you should have 2 x 10" targets as wel as 2 x 12 " targets for a total of 4 targets for Cornuteo. Left you a PM to call and make pick up arrangements.
Thanks Kevin

johnnyc14 · #**131** 03-05-2013, 04:22 PM

Hey LC, my order was for 1 twelve inch round target. Let me know when and where to pick it up. Thanks again

John

Chargerguy · #**132** 03-05-2013, 04:50 PM

Hey Kris,

My order was:

5x Full IPSC 3/8" thick
1x 8" circle 1/2" thick
1x 12" circle 1/2" thick
2x Full IPSC 1/2" thick

I'll give you a call later this week.

cornuteo · #**133** 03-06-2013, 03:38 PM

Just wanted to thank LC once again for providing a pick-up service for those of us up here in Edmonton who ordered AR Plate targets. Not too many left out there who think of others, over themselves anymore. Hope one day I can return a favor your way. It was a pleasure meeting you, and chatting with you. Take care, and be safe.
Kevin

Killymagee · #**134** 03-06-2013, 07:08 PM

I'd love to buy a target if there are any that no one has claimed.

Jordan Smith · #**135** 03-06-2013, 07:18 PM

Killy,

Email me at jordan(at)jerbelautowerks(dot)com with your order, and I'll add you to the list of GB round 2. I will close the GB to orders at the end of next week, at which time I'll place the final order with the steel supplier.

Killymagee · #**136** 03-07-2013, 12:51 PM

Quote:

Originally Posted by Jordan Smith

Killy,

Email me at jordan(at)jerbelautowerks(dot)com with your order, and I'll add you to the list of GB round 2. I will close the GB to orders at the end of next week, at which time I'll place the final order with the steel supplier.

Ok great, sending an email your way!.

MadMarty911 · #**137** 03-09-2013, 05:43 PM

An order still going in? I may have use for a few!

Jordan Smith · #**138** 03-10-2013, 09:32 AM

^ Yes. GB round 2 will close at the end of next week and another order will be placed with the steel supplier. The pricing will remain the same for this second wave of the GB.

RANGE REPORT:

This steel is good stuff

382 yards, .243AI shooting 105AM at 3222fps. Wind 11mph right to left.

I put 3 to the chest, 1 to the head. ZERO damage to steel.

People always like a pic or two...

Jordan Smith · #**139** 03-10-2013, 10:18 PM

Just a reminder, guys, to get your deposits in before the end of next week (1 week from today) for the second round of the GB.

Stinky Coyote · #**140** 03-10-2013, 10:22 PM

Very nice, got my plates the other day, thank Jordan, good shooting!

Lefty-Canuck · #**141** 03-10-2013, 10:33 PM

I haven't even shot my two from the last order and I feel like I need more lol!

LC

Jordan Smith · #**142** 03-10-2013, 11:43 PM

You can't hear it very well with the wind masking most of the hit report, but here's a video showing me shooting some of this steel at 437 yards.

http://www.youtube.com/watch?v=qatOKs3-EUc

Jordan Smith · #**143** 03-12-2013, 12:47 AM

Everybody please get your deposits in by the end of the week so you don't get left out when we go to place the final order with the steel supplier

Albertacoyotecaller · #**144** 03-12-2013, 09:55 PM

I know nothing about how to get an order in but need some. Jordan, can you contact me via pm please.

Greg

TBark · #**145** 03-12-2013, 10:59 PM

Anybody else from Edm area ordering ?
I am stuck at work for a term and cannot get down to cowtown myself.
I can pitch in for some gas if someone else can make the trip.

Thanks,
TBark

TBark · #**146** 03-13-2013, 01:33 PM

Or anyone from Red Deer ordering ?
We could discuss transport.
Thanks,

TBark

wolf308 · #**147** 03-13-2013, 02:39 PM

yep i live in red deer and am gonna pm jordan now.

keep in touch,i have a pick up.

ahhh what size of ipsc target do i want though????...help. full or 66% ??? whats more realistic for training if the zombies start coming...?

im leaning towards the 66% version...1/2 thick for my 308 and 338 at 1000 and further

wolf308 · #**148** 03-13-2013, 08:52 PM

anyone have this jordan smiths phone number ? may i have it?

Jordan Smith · #**149** 03-14-2013, 01:39 AM

You have email. Please don't post my phone number on an open forum

wolf308 · #**150** 03-14-2013, 05:30 AM

ha ha , ok , use email ,copy. thanx