Go Back   Alberta Outdoorsmen Forum > Main Category > Archery Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 01-11-2020, 05:06 AM
Bonescreek's Avatar
Bonescreek Bonescreek is offline
 
Join Date: Feb 2013
Posts: 1,269
Default Simple tool to check cam lean on bottom cam

I've heard the string stop on the Triax may be glued in as well as having
allen lock down screws. So I made a simple tool to check the bottom
cam lean out of some aluminum square tubing I had laying around.
If you make one be sure to remove any rough edges at the cut ends
so as not to mark or cut into your cam or string/cables.

Tool on bench with steel streight edge laying against it's bottom edge.



Side view of tool



View of string stop clearance



View of tool in use on bottom cam to nock point



View of arrow layed on top cam to nock point



Speeds along tuning when changing top hats or cam spacers.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 08:21 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.