|
|
09-22-2019, 06:34 AM
|
|
|
Join Date: Mar 2008
Location: Beaumont
Posts: 429
|
|
Quote:
Originally Posted by Ken H
As the others have said, it would be good to find out why the turbo went I have a 2013 f150 with 436000kms and have never had any issues with the turbo.
|
i have a 2013 F150 eco boost with 230,000 km.
Replaced the speed sensor at 200,000 and that's all so far.
I accelerate slow and drive under speed limits with no sudden thrusts on the gas pedal.
|
09-22-2019, 07:05 AM
|
Banned
|
|
Join Date: Sep 2013
Posts: 838
|
|
There's something to be said about using good oil and regular oil changes!
|
09-22-2019, 08:13 AM
|
|
|
|
Join Date: Jan 2010
Location: Edmonton
Posts: 6,470
|
|
Quote:
Originally Posted by RZR
There's something to be said about using good oil and regular oil changes!
|
I do change the oil often and use Castro synthetic. 5000 km or so.
__________________
Kim
Gonna get me a 16" perch.
|
09-22-2019, 08:37 AM
|
|
|
Join Date: Sep 2012
Posts: 6,270
|
|
turbo
A high quality turbo design by a experienced diesel engine builder such as Cat or Cummins is much more important than the quality of the oil you use. However changing oil on modest milage basis also important to long turbo life. I never use synthetics in any of my trucks with turbos, consider it waste of good $$. A good quality oil filter much more important. I saw study where major trucking firm only changed oil filter every 10,000km, they found oil showed no wear metals until ~50,000 km.
|
09-22-2019, 09:59 AM
|
|
|
Join Date: Oct 2007
Posts: 714
|
|
Quote:
Originally Posted by Big Grey Wolf
A high quality turbo design by a experienced diesel engine builder such as Cat or Cummins is much more important than the quality of the oil you use. However changing oil on modest milage basis also important to long turbo life. I never use synthetics in any of my trucks with turbos, consider it waste of good $$. A good quality oil filter much more important. I saw study where major trucking firm only changed oil filter every 10,000km, they found oil showed no wear metals until ~50,000 km.
|
Well....Cummins and Detroit's oil change interval according to thier own specs on highway tractors is now 100 000 kms...
|
09-22-2019, 04:39 PM
|
Banned
|
|
Join Date: Sep 2013
Posts: 838
|
|
Quote:
Originally Posted by Kim473
I do change the oil often and use Castro synthetic. 5000 km or so.
|
I see your problem, a lot of hype about synthetic oils. I have always used a good conventional oil and have never had any issues.
|
09-22-2019, 07:58 PM
|
|
|
|
Join Date: Feb 2010
Location: In the woods
Posts: 8,923
|
|
Quote:
Originally Posted by RZR
I see your problem, a lot of hype about synthetic oils. I have always used a good conventional oil and have never had any issues.
|
Same here. Regular changes and not bagging the vehicle when it’s cold has more to do with premature wear than synthetic oil or not... imo
__________________
I feel I was denied, critical, need to know Information!
|
10-10-2019, 06:53 AM
|
|
|
|
Join Date: Jan 2010
Location: Edmonton
Posts: 6,470
|
|
Turbos changed. Cost me $ 2500 in parts and I did it myself. Dealer wanted over $6000. Have a few pipes left over that I didn't change out. Not an easy job with no lift. A lot harder than than the guy's on YouTube show you. The exhaust bolts were miserable to remove. Almost stripped one bolt head out removing it but did get it out. Took about 12 hrs total time, would take a person that has done it before with a lift about 8 to 10 hrs.
Gonna trade the truck in when I have a chance and absolutely no turbo's for this guy Cause I have heard that the average is 100k to 150k for replacements on the F150, and at that price it's not worth having them. I love the power and performance but not worth the cost.
__________________
Kim
Gonna get me a 16" perch.
|
10-10-2019, 08:28 AM
|
Banned
|
|
Join Date: Sep 2008
Posts: 1,701
|
|
your labour is costing you $175.00/hour........seems high to me, but i don't take my vehicles to the garage unless absolutely forced to, so could be behind the times. i thought an eaarlier quote of $125.00/hr was too high, so did the repair myself.
is $175.00 the going rate now?
can't comment on your turbo problems, 'cause i've been driving a cummins and a duramax (diesels), and have had no issues.
|
10-10-2019, 02:56 PM
|
|
|
|
Join Date: Feb 2012
Location: Far Enough From The City, AB
Posts: 1,574
|
|
Quote:
Originally Posted by Kim473
Turbos changed. Cost me $ 2500 in parts and I did it myself. Dealer wanted over $6000. Have a few pipes left over that I didn't change out. Not an easy job with no lift. A lot harder than than the guy's on YouTube show you. The exhaust bolts were miserable to remove. Almost stripped one bolt head out removing it but did get it out. Took about 12 hrs total time, would take a person that has done it before with a lift about 8 to 10 hrs.
Gonna trade the truck in when I have a chance and absolutely no turbo's for this guy Cause I have heard that the average is 100k to 150k for replacements on the F150, and at that price it's not worth having them. I love the power and performance but not worth the cost.
|
Glad it worked out and you saved yourself some $. I decided to go with the
5.0L V8 when I bought my 2013 F150, it's been great so far.....
|
10-10-2019, 03:16 PM
|
|
|
Join Date: Nov 2007
Posts: 1,721
|
|
|
10-11-2019, 08:57 AM
|
|
|
|
Join Date: Jan 2010
Location: Edmonton
Posts: 6,470
|
|
Quote:
Originally Posted by spoiledsaskhunter
your labour is costing you $175.00/hour........seems high to me, but i don't take my vehicles to the garage unless absolutely forced to, so could be behind the times. i thought an eaarlier quote of $125.00/hr was too high, so did the repair myself.
is $175.00 the going rate now?
can't comment on your turbo problems, 'cause i've been driving a cummins and a duramax (diesels), and have had no issues.
|
The dealer prices for parts were about double of what I paid for them. Thats why the labor cost seems high. Dealer quoted $ 1600 for each turbo, I got both for $ 1000 plus shipping and duty. I ordered from the states and paid duty and shipping costs. So it worked out that I paid about 1/2 cost for parts.
Would I do it again ? No ! Gonna trade it in and get a non turbo vehicle. Probably a GM. My son likes his so far. Will see in the spring.
__________________
Kim
Gonna get me a 16" perch.
|
10-11-2019, 10:18 AM
|
Banned
|
|
Join Date: Sep 2008
Posts: 1,701
|
|
thanks for the reply, but i wonder if you'll help me here..........how is it the labour cost seems higher because you would have had to pay double for the parts?
is labour cost @ 8.5 hours not pretty straight forward? not trying to be a dick here, just trying to understand.
|
10-11-2019, 04:14 PM
|
|
|
Join Date: Apr 2010
Location: Kamloops BC
Posts: 268
|
|
turbos
We( Ford -Kamloops ) are installing Turbos all the time on 2.7lt and 3.5 lt Ford V6 engines ! Phazers and Timing chains etc too ! RJ
__________________
The 284 WIN - is the Original Short Magnum !
|
10-12-2019, 08:39 AM
|
|
|
|
Join Date: Jan 2010
Location: Edmonton
Posts: 6,470
|
|
Quote:
Originally Posted by spoiledsaskhunter
thanks for the reply, but i wonder if you'll help me here..........how is it the labour cost seems higher because you would have had to pay double for the parts?
is labor cost @ 8.5 hours not pretty straight forward? not trying to be a dick here, just trying to understand.
|
I see what your saying. It's not adding up. They had on there quote 8.5 hrs, I think that they may have increased the labor rate because of working with 10 exhaust bolts on the turbos. If just one bolt were to break or strip it could add a couple hrs to remove it.
I just about striped one bolt head myself but lucky that it did come out. If not I would have had to weld a nut to it and try to get it out. With the heat and cool cycles they are miserable to remove as well as the location of a couple are not very easy to get at. They are were almost welded in place because of the exhaust heat. Your very limited on how long of a wrench you can use on them too so that made less force you could put on them. On one bolt you could only move the ratchet one click at a time. On another you had to alternate the wrench one tooth at a time. A very good Torx 47 is needed as well, lucky a buddy had a good snap-on one because a cheaper quality one would have striped.
It's not a nice job to do. The you tube video's make it look easy but it's not.
__________________
Kim
Gonna get me a 16" perch.
|
10-12-2019, 08:53 AM
|
Banned
|
|
Join Date: Sep 2008
Posts: 1,701
|
|
thank you
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 08:14 AM.
|