|
03-16-2017, 11:01 AM
|
|
|
Join Date: Oct 2008
Location: Alberta
Posts: 2,824
|
|
leader design 4Wt
After many years of using 8wt I just picked up a 4wt rod/line combo and it's time to start making up some leaders. I alwys started with 3' of 30# and tapered down to 4 or 6# tipets for trout, salmon and anything else that would take a fly.
With the 4wt lines I am not sure what size I should make my permanent section , stick with 30# or drop to a 25 or 20# as the permanent section?
Most of my fishing is with hook sizes from 12 to 16 dry, except in the early seasons when I like wets in similar sizes.
I have 2 new lines to rig, both weight forward, #4's , 1 floating, 1 sinking tip.
Any leader sugestions for the light 4 weights?
|
03-16-2017, 02:24 PM
|
|
|
Join Date: Aug 2012
Posts: 254
|
|
Regardless of the line size you end up going with for your leader, I would suggest you finish the leader off with the "perfection loop".
If you have your leader finished off with this loop, you can quickly change out tippets with various line sizes when you tie your tippet with the same perfection loop.
All you then need to do is "loop in" a new tippet section of whatever size you want. Loop to loop connection with no knot connecting the two. Loops in each end pieces of your leader and you tippet, and connect by running one loop through the other and pulling the tippet through your loop and cinch down.
|
03-16-2017, 02:28 PM
|
|
|
|
Join Date: Nov 2008
Posts: 11,370
|
|
I always found the perfection loop to be a weak knot, I use a very small steel ring instead.
__________________
“One of the sad signs of our times is that we have demonized those who produce, subsidized those who refuse to produce, and canonized those who complain.”
Thomas Sowell
|
03-16-2017, 02:55 PM
|
|
|
Join Date: May 2007
Posts: 2,965
|
|
A 20lb butt section should be fine
|
03-16-2017, 03:32 PM
|
|
|
Join Date: Dec 2012
Posts: 195
|
|
I rock a 30lb butt section and taper down from there.
Sent from my iPhone using Tapatalk
|
03-16-2017, 04:01 PM
|
|
|
Join Date: Jan 2015
Posts: 264
|
|
I used 25 pound maxima chameleon for my butt and first few transitions and then a tippet ring. Works well.
|
03-16-2017, 04:17 PM
|
|
|
Join Date: Dec 2012
Posts: 195
|
|
Jason
What # test do you normally attach the tippet ring to? 10lb? Or further up the leader?
Sent from my iPhone using Tapatalk
|
03-16-2017, 04:35 PM
|
|
|
|
Join Date: Nov 2014
Location: Edmonton
Posts: 1,481
|
|
A triple surgeon's knot is my go-to and it hasn't failed me yet. A buddy taught me how many years ago and honestly it's easy and strong. So why not? Just make sure to wet your knots
__________________
|
03-16-2017, 04:38 PM
|
|
|
|
Join Date: Nov 2014
Location: Edmonton
Posts: 1,481
|
|
As for butt section Id suggest 17lb, then 12, and 8, then tippet.
__________________
|
03-16-2017, 04:41 PM
|
|
|
Join Date: Jan 2015
Posts: 264
|
|
I build/carry a few different ones based on the conditions. For typical small/medium trout, I will tie the tippet ring into the end of a 8# test and just have a piece of tippet after. I don't put any additional transitions down after the ring.
If you are new to tippet rings, try to get ones with rounded edges. Flats are available, but people have reported cut lines from the edges. I use 2mm rings.
|
03-16-2017, 05:35 PM
|
|
|
Join Date: May 2012
Location: Calgary
Posts: 744
|
|
Eh buy tapered leader that suits the length of your fly rod. I usually buy 5x 71/2 foot for my smaller rods. Then add a chunk of 7 x to it for smaller flys. Or cut it back for bigger flys. I can get away with one or two in a season and I second the double or triple surgeons knot for tippet connections.
|
03-16-2017, 05:46 PM
|
|
|
Join Date: Feb 2008
Location: Crowsnest Pass
Posts: 2,392
|
|
Tippet
Quote:
Originally Posted by Jason.seaward
I build/carry a few different ones based on the conditions. For typical small/medium trout, I will tie the tippet ring into the end of a 8# test and just have a piece of tippet after. I don't put any additional transitions down after the ring.
If you are new to tippet rings, try to get ones with rounded edges. Flats are available, but people have reported cut lines from the edges. I use 2mm rings.
|
X2 leaders last a long time with this method.
|
03-17-2017, 04:09 AM
|
|
|
Join Date: Oct 2008
Location: Alberta
Posts: 2,824
|
|
I ended up nail knotting 3' of 25# to the sink tip line, followed by blood knotting 2' of 20#, 2' of 14# 2' of 10# and 3' of 6#.Ice out will tell the story on how well it turns over with the 8 1/2' #4 rod.
The nice thing about making your own tapers is the ease of making changes when they don't perform. I like to add a tiny drop of super glue to the knots when I trim them to help eliminate the knots picking up surface scum and weeds etc.
For the floating line I will probably make a similar leader, and drop down to 2# for the real small dry flies.
|
03-17-2017, 07:51 AM
|
|
|
Join Date: Dec 2007
Location: Central Alberta
Posts: 1,796
|
|
Quote:
Originally Posted by petew
After many years of using 8wt I just picked up a 4wt rod/line combo and it's time to start making up some leaders. I alwys started with 3' of 30# and tapered down to 4 or 6# tipets for trout, salmon and anything else that would take a fly.
With the 4wt lines I am not sure what size I should make my permanent section , stick with 30# or drop to a 25 or 20# as the permanent section?
Most of my fishing is with hook sizes from 12 to 16 dry, except in the early seasons when I like wets in similar sizes.
I have 2 new lines to rig, both weight forward, #4's , 1 floating, 1 sinking tip.
Any leader sugestions for the light 4 weights?
|
Petew,
The butt section plus some of the next sections stiffness determines the OD of leader material chosen. For example, Maxima Ultragreen is quite soft, Maxima Chameleon is quite a bit stiffer, Mason Hard is stiff.
I use Maxima Chameleon as a compromise. For 4 wt. I 'd use 20 lb. for the floater.
For the sink tip, 4' of 3X.
Don
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 05:54 AM.
|