22PPC enthusiasts

[AlbertaAl]

I'm wondering if anyone is shooting 22PPC
Is your rifle factory? What's your pet load, preferred powder, bullets, brass.
I'm not interested in turning necks and leaning towards 60-70 grain bullets
This will be a SAKO AI single shot with a RKS gain twist bbl
Any recommendations for a chamber reamer to suit my needs ?

Donor rifle is a SAKO custom 20PPC that needs to be re-barreled after 12 years of coyote hunting with a variety bullets.
I had the unpleasant task of turning necks for the 20PPC

[Redneck 7]

Sorry no help here but I like your rifle set up a lot. Silver target Leupold and that bipod for bench. Fricken wicked man!

[fps plus]

If you talk to any reamer manufacture they will let you know what you need. My preference for reamers is JGS and Manson . If you have a specific brass you want to use you can send them a brass and they can make the reamer you want ( if you want minimum spec chamber ) . Yes they can make minimum spec with no turn neck

[kodiakken]

Have a Ruger M77 Mkii factory haven't gotten to play with it much. The little bit I have shot it seems to be very accurate if zi do my job.

[Cow Town Bill]

I have a custom 22 PPC that has a .244" neck and cases must be neck turned. Neck turning requires some time and patience but they only have to be turned once---and the cases last a long time.
I shoot 50 grain Hornady Vmax and H322 powder to get 3500 fps from a 24" barrel. Accuracy is superb as one would suspect from a 22 PPC.