 |
|
08-23-2021, 08:00 PM
|
|
|
|
Join Date: Jan 2013
Location: onoway, Ab
Posts: 6,982
|
|
Loaded up some test loads 52-57gr of RL26 with LRAB for the 6.5 PRC.
Prepped some once fired 270 WSM brass and reloaded.
|
08-24-2021, 09:12 AM
|
 |
|
|
Join Date: Apr 2014
Location: Parkland County
Posts: 972
|
|
Just got my confirmation for my pre-order and my place in line for the new V4. Now...we wait. I suspect December or January at the earliest. But, I'm pleased I am number 23 in line for the new unit!
|
08-24-2021, 09:32 AM
|
 |
|
|
Join Date: Dec 2012
Posts: 1,650
|
|
Quote:
Originally Posted by 6MT
Just got my confirmation for my pre-order and my place in line for the new V4. Now...we wait. I suspect December or January at the earliest. But, I'm pleased I am number 23 in line for the new unit!
|
Just curious what new toy the V4 is? BTW that is quite the reloading room you have, I am a bit jealous. Thanks...
__________________
There is no God higher than truth - Gandhi
Protect the oppressed even if an enemy, never forgive the traitor especially if he is your friend
|
08-24-2021, 09:35 AM
|
|
|
|
Join Date: Jan 2013
Posts: 2,931
|
|
Popped 100 45-70 and 80 30-30 cases in the vibrator to run for a couple hours. Gonna load up a bunch of rounds for the season. I'm well ahead on rounds for my other calibers...looking forward to archery opener tomorrow.
|
08-24-2021, 09:47 AM
|
|
|
|
Join Date: Apr 2014
Location: Parkland County
Posts: 972
|
|
Quote:
Originally Posted by teledogs
Just curious what new toy the V4 is? BTW that is quite the reloading room you have, I am a bit jealous. Thanks...
|
That's a new version of a very accurate and fast powder thrower/trickler. The V3 has been out a while now. (Google AutoTrickler.) But the V4 is a redesign to upgrade a few areas where the V3 could be better.
BTW, thanks for the compliment.
|
08-24-2021, 10:00 AM
|
|
|
|
Join Date: Dec 2012
Posts: 1,650
|
|
Quote:
Originally Posted by 6MT
That's a new version of a very accurate and fast powder thrower/trickler. The V3 has been out a while now. (Google AutoTrickler.) But the V4 is a redesign to upgrade a few areas where the V3 could be better.
BTW, thanks for the compliment.
|
Very interesting, thank you!
When do you get one of these? Not my cup of tea, I will stick to my old school techniques & budget, lol...
https://www.ampannealing.com/amp-press/
__________________
There is no God higher than truth - Gandhi
Protect the oppressed even if an enemy, never forgive the traitor especially if he is your friend
|
08-24-2021, 10:17 AM
|
 |
|
|
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,237
|
|
Repaired my brothers Howa .270 (feeding issues). Now to free float the barrel and reinstall the original wood stock. Sight in and move scope to his preferred eye relief. May be his last hunt so got to do it right. 
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
|
08-24-2021, 01:03 PM
|
|
|
|
Join Date: Apr 2014
Location: Parkland County
Posts: 972
|
|
Quote:
Originally Posted by teledogs
|
I don't have their press.
|
08-25-2021, 10:56 PM
|
|
|
|
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,237
|
|
Quote:
Originally Posted by 6.5 shooter
Repaired my brothers Howa .270 (feeding issues). Now to free float the barrel and reinstall the original wood stock. Sight in and move scope to his preferred eye relief. May be his last hunt so got to do it right. |
Repaired the scope power adjustment control, so now it goes from 3-9power just not stuck on 4X anymore LOL. Cleaned the barrel went from 4" groups to 1.5". Big shout out to Jason B at the Outdoorsman here in the Hat for introduced me to a new copper removal solvent, made right here in Canada ( 1st choice bore cleaner ) works as well or better then the others and 2 bucks+ cheaper. 
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
|
08-26-2021, 03:49 PM
|
|
|
|
Join Date: Jan 2021
Location: Edmonton
Posts: 182
|
|
Prepped another bunch of brass. 50 pcs 22-250, 100 pcs 223, and 60 pcs 7mm-08.
Got another 600 to go, then some serious loading and multiple trips to the range.
|
08-26-2021, 08:16 PM
|
|
|
|
Join Date: Apr 2014
Location: Parkland County
Posts: 972
|
|
New counter top for the powder measuring table. It’s Corian, and it much better then the particle board that the cabinet top is made of.
It is heavier and flat. Nice and very flat. And now I have room for the V4 A/T next to the V3.
|
09-01-2021, 06:02 PM
|
|
|
|
Join Date: Mar 2014
Location: Calgary
Posts: 150
|
|
Loaded 34 out of production 160gr 7mm Nosler Solid Bases for my 7x57 Mauser CZ 21H.
Dreaming of cow elk steak.
|
09-03-2021, 09:37 PM
|
|
|
|
Join Date: May 2007
Posts: 15,831
|
|
Testing out the new 21st Century expander mandrel dies. I really like these compared to my old Sinclair one.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
09-04-2021, 10:11 AM
|
 |
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,576
|
|
Took some hand loading gear to the range yesterday and worked up some loads for a friend's M70 I sold him using some Alberta Wildcat HPFB 150's that are super accurate for slower twist 308's 
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't! 
|
09-04-2021, 01:58 PM
|
 |
|
|
Join Date: Jan 2014
Posts: 1,154
|
|
Yesterday I fired some groups from my 3006, the first shot from a cold barrel was about 2 1/2" inches out of the group in the 1:30 position. I remembered I had freefloated the barrel, but it was left slightly touching in the 7:30 position no real pressure. Today I removed some more material from the stock so it would be completely freefloating. I will shoot it again, and see how the first shot from a cold barrel fits in with the rest of the group.
__________________
"The further a society drifts from truth, the more it will hate those who speak it."--- George Orwell
There is no way to make something "Idiot Proof" because Idiots are so resourceful.
|
09-04-2021, 02:21 PM
|
 |
|
|
Join Date: May 2012
Location: Airdrie Alberta
Posts: 307
|
|
Finally got .450BM dies . Could not find at any store , ended up getting them off amazon .
|
09-04-2021, 04:43 PM
|
|
|
|
Join Date: May 2007
Posts: 15,831
|
|
Just an observation on the AutoTrickler and FX 120i. Over the last several weeks I have had trouble with it “drifting”. I realize with these scales that it is not the correct term, but it drifts. I run an Area 419 platen and powder cup and today I stood and watched it gain two tenths of a grain in a minute. Frustrated I got out the OEM platen and OEM AutoTrickler cup and the problem went away immediately. Anyway, just an FYI in case someone has a similar issue.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
09-05-2021, 12:27 AM
|
|
|
|
Join Date: Jun 2010
Posts: 344
|
|
Quote:
Originally Posted by chuck
Testing out the new 21st Century expander mandrel dies. I really like these compared to my old Sinclair one.
|
I picked this up too; haven’t used it yet. Watching the instruction video it suggested having the die loose. Did you use it that way? Or die tight to the press body? I feel like if I left the die loose it would induce runout?
Sent from my iPhone using Tapatalk
|
09-05-2021, 06:36 AM
|
|
|
|
Join Date: May 2007
Posts: 15,831
|
|
Quote:
Originally Posted by KazIce
I picked this up too; haven’t used it yet. Watching the instruction video it suggested having the die loose. Did you use it that way? Or die tight to the press body? I feel like if I left the die loose it would induce runout?
Sent from my iPhone using Tapatalk
|
I use a Forster Co-Ax. By design, dies always sit loose in that type of press. In theory, a floating die should induce less runout.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
09-05-2021, 07:32 AM
|
|
|
|
Join Date: Jan 2013
Posts: 2,931
|
|
I woke up early (3:30) made a cup of coffee and loaded up 50, 45-70 rounds 40, 300wm rounds and cleaned a couple rifles, while listening to elk bros pod cast.
|
09-05-2021, 08:49 AM
|
|
|
|
Join Date: Jul 2011
Location: Behind my Sako
Posts: 1,014
|
|
Finally used my Hornady Autocharge
Works very very well.
Made up a batch of 338 for this year ( even got out and shot them !).
Changed out the media in my tumbler.
Have to spend more time in there!!!
__________________
Keep Dreaming- Freddy Krueger.
|
09-05-2021, 08:57 PM
|
|
|
|
Join Date: Jun 2010
Posts: 344
|
|
Quote:
Originally Posted by chuck
I use a Forster Co-Ax. By design, dies always sit loose in that type of press. In theory, a floating die should induce less runout.
|
I kept trying to tell myself to not get one but the reasons keep piling up lol. I should have connected the dots with the lock rings you were using lol.
Sent from my iPhone using Tapatalk
|
09-06-2021, 08:23 PM
|
 |
|
|
Join Date: Dec 2012
Posts: 678
|
|
Going to try some 80gr TTSX in my .25-06. Loaded up 10 with H4831SC and 10 with IMR 4350.
Need to move a few scopes around between rifles, then get down to the range and test it out. BR league is done for the year, so it's time to tinker with hunting rifles.
|
09-09-2021, 10:22 PM
|
|
|
|
Join Date: Apr 2014
Location: Parkland County
Posts: 972
|
|
Brass prep all week long. Just getting around to finishing the last 2 calibers. Tonight it was the 6.5x47L.
All seated to only a .0005” variance.
|
09-10-2021, 06:34 PM
|
|
|
|
Join Date: Jan 2014
Posts: 1,154
|
|
Quote:
Originally Posted by Sashi
Yesterday I fired some groups from my 3006, the first shot from a cold barrel was about 2 1/2" inches out of the group in the 1:30 position. I remembered I had freefloated the barrel, but it was left slightly touching in the 7:30 position no real pressure. Today I removed some more material from the stock so it would be completely freefloating. I will shoot it again, and see how the first shot from a cold barrel fits in with the rest of the group.
|
Today I fired the rifle again, all 3 shots holding in 1" group, the second group was the same.
__________________
"The further a society drifts from truth, the more it will hate those who speak it."--- George Orwell
There is no way to make something "Idiot Proof" because Idiots are so resourceful.
|
09-11-2021, 09:30 AM
|
|
|
|
Join Date: Feb 2021
Location: Strathmore
Posts: 1,391
|
|
Watched a very well done video on a fellow demonstrating the features of the Forster press. Awesome piece of equipment.
|
09-12-2021, 09:19 AM
|
|
|
|
Join Date: Feb 2009
Location: rocky Mountain House
Posts: 1,536
|
|
Deprimed 300, 338LM brass and put half in the tumbler, other half went in last night on a timer. Will be loading 100 rounds today.
|
09-12-2021, 04:51 PM
|
 |
|
|
Join Date: Sep 2008
Location: Edmonton Alberta
Posts: 9,610
|
|
Cracked the lid on my FIRST ever pound of Varget... never used it before.
56g with 125g Nosler Ballistic Tips in federal brass 30-06. Im somewhere around 3200fps.
__________________
When you are born, you get a ticket to the Freak Show.
If you are born in Canada, you get a front row seat.
|
09-12-2021, 05:14 PM
|
 |
|
|
Join Date: Feb 2012
Location: Blackfalds
Posts: 6,945
|
|
Loaded 24 rounds of 145gr LRX for my 7mm RM. I am using H4831sc. It worked good on my 120gr TTSX load, hope it works good on the LRX.
__________________
Trudeau and Biden sit to pee
|
09-12-2021, 07:48 PM
|
 |
|
|
Join Date: May 2007
Posts: 6,918
|
|
56gr varget and 130 ttsx has worked well for me in a few 30-06's, hovers around 3200fps from 22" barrels on my guns.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 12:11 PM.
|
Linear Mode
