|
04-23-2010, 01:28 PM
|
|
|
|
Join Date: Jul 2007
Posts: 1,120
|
|
Custom 7mm Rem Mag
I finally have my new custom 7mm Rem Mag finished. The trued M700 Long action is mated to a Gaillard 1-9" twist barrel measuring 26", built by Dennis Sorensen. The bolt uses a Gre-tan firing pin assembly and the factory trigger tuned to a crisp 2.5 lbs. I bedded the entire assembly into a Bansners (High-tech) stock that I finished and painted with dura-coat and then textured. The match reamer was designed by Kiff specifically for long 160-180 grain VLD bullets. Finished rifle comes in at 7lbs even, and is 8lbs 2 ozs as pictured with VX3 4.5-14x40 (not incl. bipod) - just right! I chose the cartridge to take andvantage of all the superb, crazy BC, VLD bullets offered in .284, and for the ammo that is easy to find, should I get stuck for some in Asia or Africa, or wherever we end up together. I still have dies coming, so as yet it is unfired, but it won't be long now...
|
04-23-2010, 01:36 PM
|
|
|
Join Date: Feb 2008
Location: Elk Point, Alberta
Posts: 927
|
|
Nice build!.....Congrats.
|
04-23-2010, 01:44 PM
|
|
|
|
Join Date: May 2007
Location: Calgary
Posts: 2,640
|
|
Very nice rifle!
__________________
“If you could kick the person in the pants responsible for most of your trouble, you wouldn’t sit for a month.”
—Theodore Roosevelt
|
04-23-2010, 02:25 PM
|
|
|
|
Join Date: May 2007
Location: AB
Posts: 666
|
|
Sweet deal ....congrats on the Rig!!!
|
04-23-2010, 04:28 PM
|
|
|
|
Join Date: Jul 2007
Location: Edmonton
Posts: 2,195
|
|
Great looking and quality rig. The 7RM and VLD's are a deadly combination on game up to moose and PG. Next March, I plan on taking my eland and waterbuck with the same 168 VLD I used on other PG this past March. Will you be using it on spring bear?
Bobby B.
__________________
Logic never lies.
|
04-23-2010, 05:09 PM
|
|
|
Join Date: May 2007
Posts: 15,831
|
|
Nice!
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
04-24-2010, 07:46 AM
|
|
|
|
Join Date: Jul 2007
Posts: 1,120
|
|
Thanks guys. This will be my go-to for a while.
Quote:
Originally Posted by Bobby B.
Great looking and quality rig. The 7RM and VLD's are a deadly combination on game up to moose and PG. Next March, I plan on taking my eland and waterbuck with the same 168 VLD I used on other PG this past March. Will you be using it on spring bear?
|
No not spring bear. It'll be ready for this falls BC goat hunt and later whitetail and mulie hunts. Hopefully, find an elk too. Might take a run up to my sheep range with it, too.
What load are your using for your VLDs ? I want to use the slow burning powders to make the most of the 26" tube and heavy bullets, and have H1000, Retumbo and RL 25 to test. Tnx
|
04-24-2010, 08:47 AM
|
|
|
|
Join Date: Aug 2007
Location: Lethbridge
Posts: 1,309
|
|
Great little rifle!!
Hope to see some targets of it very soon!
__________________
"I find it amazing that we, as a society, find it so easy to view the perpetrators of crime with an understanding and knowing that they are suffering from the frailties of being a human being yet we cannot seem to extend that same courtesy to the very people we ask to face, on a daily basis, the worst that mankind has to offer."
-Dave (Whiskey Wish)-
|
04-24-2010, 05:38 PM
|
|
|
|
Join Date: Jul 2007
Location: Edmonton
Posts: 2,195
|
|
My load is WW Super brass (which Lapua would make 7RM brass), WLRM primers, 69 grains of Retumbo and the 168 VLD seated .010" into the lands. Velocity averages 2950-60 and accuracy is around 1.5" at 300 yds for a 4 shot group. This load shoots around 1" at 100 yds.
Hope this helps.
Bobby B.
__________________
Logic never lies.
|
04-24-2010, 08:28 PM
|
|
|
Join Date: May 2007
Posts: 7,719
|
|
Great lookin rig Paul!
|
04-24-2010, 08:53 PM
|
|
|
Join Date: Mar 2009
Posts: 622
|
|
Nice rig. Excellent choice for a cartridge too. I loaded my 300 mag with H-1000 and at max load the groups shrunk to 3/8 inch and had an extreme spread of 8 fps. So that is definately a good powder to try out for the heavy bullets. Let us know how she shoots.
|
04-24-2010, 09:02 PM
|
|
if you need or want a silver bolt shroud, let me know. I have the them in stock.
|
04-24-2010, 09:30 PM
|
|
|
|
Join Date: Jul 2007
Posts: 1,120
|
|
Thanks guys. Looks like my powder selection should cover it - definitely leaning towards H1000 or Retumbo, but the RL25 shoots so well in my 300 RUM and 338 LM, that I'll have to give it a run too - gonna try both 168 Bergers and 162 A-max's for now.
Thanks for the offer on the shroud, but I have three M700 LA stainless bolt actions; this black shroud ensures I don't mix them up.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 05:36 PM.
|