Imperial sizing wax

[djwf69]

What's the best way to use this stuff and clean it off when done. Any input would be helpful .

[coolpoolken]

I've been using it for years. All I do is wipe my pointing finger across the wax and spin the case between my thumb and finger. Doesn't take much. To remove it after sizing , I use a dry rag and give them a quick wipe. Comes off as easy as it goes on. I've been using the same tin since the early '90's........ken

[catnthehat]

Originally Posted by coolpoolken

I've been using it for years. All I do is wipe my pointing finger across the wax and spin the case between my thumb and finger. Doesn't take much. To remove it after sizing , I use a dry rag and give them a quick wipe. Comes off as easy as it goes on. I've been using the same tin since the early '90's........ken

X2.
I have one in the garage and one in the shop as well.
The one tine is likely about 40 years old, and is the old style writing!
Cat

[sbtennex]

As above. This is probably the best stuff there is for case lube.

[djwf69]

Thanks for the input guys!!