What Bases and rings

[1badshot]

Hi guys i just purchased a Bushnell 6500 2.5x16x30mm for my Rem 700 338WM just wondering what you guys would suggest for this combination.

Thanks 1Badshot

[roger]

if you got a couple bucks burning a hole in your pocket, call richard at NEAR mfg. in camrose i think he can mill something up in an alphamount for that configuration.

[prarie_boy1]

On my LA Remington 700 I use a Warne 0 MOA rail and leupold prw rings. It has been a rock solid set up for me with no issues. But as stated above if you want the Cadillac of mounts the Near Alphamount is made in Camrose and sets the standard.........

[Chargerguy]

On my last 2 model 700s I went with Warne rails and ATRS rings and will continue to do the same from now on. The ATRS rings are amazing quality. I will be changing out my model 700 hunting rig to the same setup and ditching the Leupold PRW rings currently on it. I don't like the way the PRW rings snap over the scope tube. I've bedded both rails. One required the front to be bedded, the other the rear. One receiver was out so much the front of the rail made no contact with the receiver. Just something you may also want to address for a stress free scope/mount.