screw in chokes

[citysfs]

if you were to have an over and under threaded for chokes, who would you use to do the job ?

[elkhunter11]

That would depend on where you live. First, I would make sure that the shotgun will be compatible with screw in chokes, if the barrels are too thin, it may not be an option. Seeing your location, I would check with Corlanes.

[Dean2]

Some excellent info on installing shotgun chokes. This way you will know what can and can't be done.

https://www.briley.com/c-408-choke-i...ation-faq.aspx

List of their Canadian Dealers. Calgary Shooting Centre had a German trained gun smith last time I was there. He did some work on a rifle for me, very good quality, reasonable price. Would be worth a call re chokes.

Canada
Lawry Shooting Sports
(Briley Thinwall installation and chokes and accessories)
27 Industrial Dr., PO Box 2153, Caledonia, Ontario, Canada, N3W2G6
Phone: 905-765-3343
www.lawryshootingnsports.com
rick@lawryshootingsports.com

Atlantic Firearms & Shooting Supplies
P.O. Box 28101, Dartmouth, Nova Scotia, Canada, B2W 6E2
Phone: 902-830-6969
sales@finarms.ca

Calgary Shooting Centre Ltd.
(Briley chokes and accessories)
Bay 4, 7130 Fisher Road S.E.Calgary Alberta T2H 0W3
Phone: (403) 451-1777
john@theshootingcentre.com

Cambridge Sporting Arms
(Briley chokes and accessories)
741 King St E, Cambridge Ontario, N3H 3P2, Canada
+1.519-653-3085

Dante Inc.
(Briley chokes and accessories)
6851 St. Dominique, Montreal Quebec, Canada
Phone: 514-271-2057
aldo@dantesports.com

[Pioneer2]

I was under the impression they sent their gunsmithing to Texas.

[stob]

I have always seen partial to briley back bored chokes and Mueller backbored chokes chokes

[Faststeel]

Originally Posted by citysfs

if you were to have an over and under threaded for chokes, who would you use to do the job ?

Don't forget the forcing cones....