|
|
07-21-2019, 09:43 AM
|
|
|
|
Join Date: Feb 2012
Location: Blackfalds
Posts: 6,950
|
|
Rest from a bench
What are you guys using to shoot off a bench?
I need to get a new setup, the rifle rest I have doesn’t work well with my AR style rifles and if I’m using a chrony it’s hard to swap between rests.
I’m thinking a taller bag in the front with 2 different rear bags. One short one for hunting rifles, tall one for AR stocks.
|
07-21-2019, 09:51 AM
|
|
|
Join Date: May 2007
Posts: 15,847
|
|
Mine is Sinclair’s lighter model. It is also less expensive. I’m also using the bald eagle rear bag with the handle.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
07-21-2019, 11:21 AM
|
|
|
|
Join Date: Jan 2012
Location: On the border in Lloydminster
Posts: 8,369
|
|
Nothing fancy but functional the back rest is adjustable by removing a block.
|
07-21-2019, 01:18 PM
|
|
|
|
Join Date: Dec 2010
Location: My House
Posts: 13,464
|
|
Most of us use something similar to the two pics above.
|
07-21-2019, 01:30 PM
|
|
|
Join Date: Aug 2008
Location: south of calgary
Posts: 1,831
|
|
rest i fab. protektor bags
__________________
220swifty
1. People who list their arguments in bullets points or numerical order generally come off as condescending pecker heads.
2. #1 is true.
|
07-21-2019, 06:05 PM
|
|
|
Join Date: Jun 2007
Posts: 1,087
|
|
I use a variety of bags for bench shooting. Game changer, Pump pillow and a small rear bag or two.
|
07-22-2019, 06:48 PM
|
|
|
Join Date: Nov 2009
Location: East Central Alberta
Posts: 8,315
|
|
This is the set up I favor for benching sporter rifles. Note: Small pieces of painters tape affixed to the stock make it easy to reset the rifle after recoil, so it sits in the same position for each shot in the group. IMO inconsistent resets are the most prevalent cause of poor groups.
Next is a look from the backside of the rest set up. For best results, it is critical that the centerline in rear bag matches the centerline in the saddle of the front rest. If setting the pistol grip on the stock about 1/2” back of where it will make contact with the rear bag (to absorb recoil), care must be taken to insure to reset the rear bag back to the pre-shot location...and be certain the bag has not been turned slightly.
Next is a look at how the forestock “fits” into the saddle on the front rest. This stock has a fairly flat bottom (KSA design sold by Wildcat) which makes it easier to handle in the rest as it wants to torque clockwise as the bullet “twists” it’s way down the bore. For best results, it is best for the contour of the bottom of the forestock to fit the shape of the saddle (primarily bottom and a little up the side).
I tried for a better pic of the saddle but looks like I got it a bit off center, but you get the idea. It has a fairly flat bottom that is not too thick so it remains “firm” but not “hard”. There is a bit of support for the sides of the forestock close to the bottom of the stock. Just enough contact to resist a bit of the torque roll, but not enough to impair the rearward recoil slide.
__________________
Old Guys Rule
Last edited by 260 Rem; 07-22-2019 at 07:12 PM.
|
07-22-2019, 09:12 PM
|
|
|
Join Date: Nov 2013
Posts: 323
|
|
I have been using a Caldwell Rock BR for a couple years. I have zero complaints about it and it serves me well.
|
07-22-2019, 09:24 PM
|
|
|
Join Date: Oct 2016
Posts: 28
|
|
Every time 260Rem gives me tips at the range, my shooting seems to improve. Do what he says...
|
07-22-2019, 09:43 PM
|
|
|
Join Date: Jun 2007
Location: Calgary, AB
Posts: 626
|
|
260Rem, is that rear rest custom or store bought?
Sent from my SM-G970W using Tapatalk
|
07-22-2019, 09:57 PM
|
|
|
Join Date: Nov 2009
Location: East Central Alberta
Posts: 8,315
|
|
A couple of things that I watch:: Make sure the sling stud sits far enough forward of the saddle on the front rest to insure it does not make contact (touching typically induces stringing high). And, that the rear sling stud is not resting on the rear bag...so there needs to be enough “drop” behind the ears.
When choosing a rear bag I want one with short bunny ears because the tall ears sometimes contact sporter stocks with cheek pieces....which pushes the stock to one side as it slides back. Or just choose a stock with no cheekpiece.
Another feature I look for in a rear bag is one that has a good lenth-to-height ratio. If they are short back-to-front...and tall...they tend to “rock” back as the rifle recoils. Rocking is not good
__________________
Old Guys Rule
|
07-22-2019, 10:13 PM
|
|
|
Join Date: Nov 2009
Location: East Central Alberta
Posts: 8,315
|
|
Quote:
Originally Posted by GrandSlam
260Rem, is that rear rest custom or store bought?
Sent from my SM-G970W using Tapatalk
|
It’s an Edgewood ... was purchased by a buddy ...from Sinclair (now also Brownells) in the US. I don’t know of any CDN dealers but there are similar styles available in Canada that are probably just as good. If thinking of ordering one out of the US, just get the empty bag. That heavy sand is pricey to ship.
The idea with the back bag is that it needs to be “firm” ... not much give so it retains its shape. That means it is best to use sand as fill. Other media tends to change shape under recoil which is not good.
Another thing I look for in the rear bag is a bit of space between the ears (like in one of my pics above)...because most sporter stocks are “rounded” on the bottom behind the pistol grip... and they fit better with the “space” between the ears. I think BR type stocks are more “V’d” on the bottom, so they probably fit better with less space?
EDIT: Not sure what brand the one in Chucks set up is...but I ve seen them at the Range and they look to have similar features to the Edgewood.
__________________
Old Guys Rule
Last edited by 260 Rem; 07-22-2019 at 10:19 PM.
|
07-23-2019, 12:05 AM
|
|
|
Join Date: Jun 2007
Location: Calgary, AB
Posts: 626
|
|
Currently using an older Benchmaster. Works ok, but looking for better alternatives.
Sent from my SM-G970W using Tapatalk
|
07-23-2019, 08:16 AM
|
Shooting Xs
|
|
Join Date: Sep 2009
Location: Medicine Hat
Posts: 836
|
|
Rock BR front rest with some modifications for smoother performance. Protektor bags, fronts are a#2 medium owl ear for hunting stocks and a custom #3 square ear with Slick Silver material for bench rest type stocks. Rear bag is a #14A Bunny ear for it's solid hard bottom feature, as 260 mentioned the soft bottom is rounded and rocks too much. Order them direct ,use the unfilled shipping option you'll have them in a week.
https://protektormodel.com/collections/all
The Edgewood's from Sinclair are very good but pricey, not sure if they ship unfilled,that heavy sand adds $'s to the shipping for sure.
I thought I read some one in Alta. was carrying Bald Eagle bags like Chucks,also a very good product.
|
07-23-2019, 12:31 PM
|
|
|
Join Date: Nov 2009
Location: East Central Alberta
Posts: 8,315
|
|
DLab...thanks for posting the ProteKtor link...their Bumble Bee series looks like it has many of the features I like in the Edgewood (hard bottom, 3/8 ear separation).
Another of my preferences is that the rear bag has sufficient height to insure I do not need to “stack”. Stacking introduces another variable that can be tough to replicate shot-to-shot.
Also, regarding the front rest bags with the Velcro attachment strips on the bottom ...will often “rock” unless they are really well secured. If using that style of bag on the front, I would be taping the heck out of it to make sure it could not move in the saddle. During initial set-up, it is a good idea to take a very close look at what is happening with the front bag as you pull the rifle back an inch ...for repeatability, the bag should not move...even a smidgeon. If it moves, use the rest of the roll of your electrical tape
__________________
Old Guys Rule
|
07-23-2019, 02:08 PM
|
Shooting Xs
|
|
Join Date: Sep 2009
Location: Medicine Hat
Posts: 836
|
|
Electrical tape...Pffffttt...real men use Gorilla brand Duct tape.If you can't fix it with Duct tape...you're not using enough.
|
07-23-2019, 06:43 PM
|
|
|
Join Date: Nov 2013
Posts: 323
|
|
Some great info guys and thanks for the links.
I just spent some hard earned money on a new set of Protektor bags!
|
07-23-2019, 07:47 PM
|
|
|
Join Date: Jan 2013
Location: onoway, Ab
Posts: 6,993
|
|
I use the same Edgewood rear bag as 260 Rem. I ordered the heavy zircon sand from Sinclair’s, it was $19.00 but the shipping was $62.00.
|
07-23-2019, 08:09 PM
|
|
|
Join Date: Nov 2009
Location: East Central Alberta
Posts: 8,315
|
|
Quote:
Originally Posted by Smokinyotes
I use the same Edgewood rear bag as 260 Rem. I ordered the heavy zircon sand from Sinclair’s, it was $19.00 but the shipping was $62.00.
|
In the end, it was probably money well spent given that not all sand types are created equal. It is my understanding that some (more common sand types) “kernels” are smooth/round, whereas the zircon kernels are of the type that are sharp/irregular shaped. Although the former can be packed pretty tight they can remain somewhat “fluid” which permits the bag to change its shape. However, the zircon basically “locks” together which helps the bag retain/maintain its shape shot-to-shot. That being said, I suspect only 1% of shooters will reap the benefits offered by zircon. But, for those shooters like myself that need to take advantage of every little “trick”, zircon is the way to go. IIRC there is a foundry in Eastern Canada that sells zircon.
And yes, weight counts.
__________________
Old Guys Rule
|
08-01-2019, 02:10 PM
|
|
|
Join Date: Apr 2017
Posts: 182
|
|
Some good reading in here. Has anyone ever used the Caldwell tack driver rest? Was thinking of getting one. I usually just shoot with a short bipod and a sand bag in the Rear.
|
08-01-2019, 09:26 PM
|
|
|
Join Date: May 2012
Location: Edmonton,AB
Posts: 997
|
|
Quote:
Originally Posted by 260 Rem
In the end, it was probably money well spent given that not all sand types are created equal. It is my understanding that some (more common sand types) “kernels” are smooth/round, whereas the zircon kernels are of the type that are sharp/irregular shaped. Although the former can be packed pretty tight they can remain somewhat “fluid” which permits the bag to change its shape. However, the zircon basically “locks” together which helps the bag retain/maintain its shape shot-to-shot. That being said, I suspect only 1% of shooters will reap the benefits offered by zircon. But, for those shooters like myself that need to take advantage of every little “trick”, zircon is the way to go. IIRC there is a foundry in Eastern Canada that sells zircon.
And yes, weight counts.
|
Isn’t zircon sand radioactive?
__________________
you know I prefer to shoot off hand
|
08-01-2019, 10:17 PM
|
|
|
Join Date: May 2012
Location: Edmonton,AB
Posts: 997
|
|
Quote:
Originally Posted by sailor
Isn’t zircon sand radioactive?
|
No it is not I found answer.
Sorry Rem260 for bothering
__________________
you know I prefer to shoot off hand
|
08-02-2019, 09:12 AM
|
|
|
Join Date: Nov 2013
Posts: 323
|
|
New bags came in yesterday. Great service from Protektor!
Love the bags and they're definitely a step up from Caldwell bags.
Can't wait to try them out.
|
08-03-2019, 08:14 AM
|
Banned
|
|
Join Date: Sep 2008
Posts: 1,701
|
|
no wonder some of you guys shoot one hole groups!
i cut the legs off a pair of blue jeans, filled them with sand out of the nearby gravel pit, and got my better half to sew them shut.
i know everyone is a different level of dedicated, but if i can't get my banger close enough with my setup i will quit hunting.
have clobbered 'yotes passed 600 yds, so think i must be doing something right.
for those of you who are one hole shooters, carry on.......i know there are better systems than the one i use.
|
08-03-2019, 08:26 AM
|
|
Moderator
|
|
Join Date: Feb 2015
Posts: 7,668
|
|
Quote:
Originally Posted by spoiledsaskhunter
no wonder some of you guys shoot one hole groups!
i cut the legs off a pair of blue jeans, filled them with sand out of the nearby gravel pit, and got my better half to sew them shut.
i know everyone is a different level of dedicated, but if i can't get my banger close enough with my setup i will quit hunting.
have clobbered 'yotes passed 600 yds, so think i must be doing something right.
for those of you who are one hole shooters, carry on.......i know there are better systems than the one i use.
|
Sometimes, if the fence post that I'm using as a rest wiggles, I'll move over to the next one.
|
08-03-2019, 08:37 AM
|
|
|
Join Date: Jan 2012
Posts: 401
|
|
Quote:
Originally Posted by EagleEyes
Some good reading in here. Has anyone ever used the Caldwell tack driver rest? Was thinking of getting one. I usually just shoot with a short bipod and a sand bag in the Rear.
|
My experience with Caldwell bags is that they are low quality. The seams of the bags separate easily. I have had some bags where the seams started to separate when just filling the bags with sand. Caldwell cuts the panels to a minimum dimension, needle holes when sewn are right on the very edge of the material. It takes very little to separate the seams.
|
08-03-2019, 03:36 PM
|
|
|
Join Date: May 2007
Posts: 15,847
|
|
Quote:
Originally Posted by spoiledsaskhunter
no wonder some of you guys shoot one hole groups!
i cut the legs off a pair of blue jeans, filled them with sand out of the nearby gravel pit, and got my better half to sew them shut.
i know everyone is a different level of dedicated, but if i can't get my banger close enough with my setup i will quit hunting.
have clobbered 'yotes passed 600 yds, so think i must be doing something right.
for those of you who are one hole shooters, carry on.......i know there are better systems than the one i use.
|
There is absolutely nothing wrong with that setup.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
11-23-2019, 09:04 PM
|
|
|
Join Date: May 2012
Location: Edmonton,AB
Posts: 997
|
|
Found good deal on The Caldwell Rock BR Competition Rifle Front Shooting Rest in USA Caldwell selling them for 124 USD.
Wonder how much would be delivery cost?
Does anybody have experience buying rests from USA?
Thanks!
__________________
you know I prefer to shoot off hand
|
11-23-2019, 09:16 PM
|
|
|
Join Date: Dec 2008
Location: Camrose
Posts: 45,145
|
|
I use a Caldwell Rock, with two different width from bags, and two different height leather rear bags, to provide a better fit for different rifles.
__________________
Only accurate guns are interesting.
|
11-23-2019, 10:51 PM
|
|
|
|
Join Date: Jul 2010
Location: Edmonton
Posts: 11,858
|
|
Excellent tip on the painter's tape to reset the position of the rest and rear bag in relation to the stock - thank's 260 - something I didn't pay quite "as much" attention to I guess. I just would reset in the "same position" but was eyeballing it.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 02:42 AM.
|