I made my own. Just make sure you have solid connections on the sled, too much flex and it could tear it out. It is a 2"x2" heavy wall with diagonals to the connections, also 2"x2" that quick pin into the brackets on the sled. My snowmobile had a hitch already, so I just downloaded a photo for the factory hitch and welded up my own. All it cost me was time. All scrap metal around the shop.
I went ahead and made my own sled as well, just so I could reinforce the front the way I want. My sled is 72" long x 32" wide, aluminum framing with PVC sides and elasticized cover with lexan bottom and runners. I pull it by hand sometimes, it slides better than my Cabelas sled.
|