Go Back   Alberta Outdoorsmen Forum > Main Category > Archery Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 10-21-2013, 11:25 AM
BigRackLover's Avatar
BigRackLover BigRackLover is offline
 
Join Date: Jun 2007
Location: Beaumont
Posts: 4,642
Default Archery Netting - backstop

Anybody ever bought archery netting for a backstop? I'd like to buy some to shoot in my yard with the kids .... already got one hole in the fence.

The fence backs onto an empty field so no comments about that please....it's safe.

My bow is 67lbs ... so I'd like it to stop that.

Seems like $400 is the going rate for a 10'x30' section.
__________________
Check out my page, even like it perhaps
Reply With Quote
  #2  
Old 10-21-2013, 11:31 AM
Mike_W's Avatar
Mike_W Mike_W is offline
 
Join Date: May 2007
Location: Stony Plain
Posts: 6,433
Default

Quote:
Originally Posted by BigRackLover View Post
Anybody ever bought archery netting for a backstop? I'd like to buy some to shoot in my yard with the kids .... already got one hole in the fence.

The fence backs onto an empty field so no comments about that please....it's safe.

My bow is 67lbs ... so I'd like it to stop that.

Seems like $400 is the going rate for a 10'x30' section.
yikes at that price Id buy a couple sheets of plywood and some 2x4's
Reply With Quote
  #3  
Old 10-21-2013, 11:43 AM
BigRackLover's Avatar
BigRackLover BigRackLover is offline
 
Join Date: Jun 2007
Location: Beaumont
Posts: 4,642
Default

the plywood is heavy and ugly and STEALS my inserts and field points. It's mostly for the kids and learning to shoot, so I'd rather not be wrecking arrows.
__________________
Check out my page, even like it perhaps
Reply With Quote
  #4  
Old 10-21-2013, 11:53 AM
25-06rem.model700's Avatar
25-06rem.model700 25-06rem.model700 is offline
 
Join Date: May 2007
Location: Caroline
Posts: 285
Default

Get that big heavy black matting, the stuff in hockey dressing rooms
Reply With Quote
  #5  
Old 10-21-2013, 02:39 PM
Mike_W's Avatar
Mike_W Mike_W is offline
 
Join Date: May 2007
Location: Stony Plain
Posts: 6,433
Default

Quote:
Originally Posted by BigRackLover View Post
the plywood is heavy and ugly and STEALS my inserts and field points. It's mostly for the kids and learning to shoot, so I'd rather not be wrecking arrows.
the extra $350 you save can buy a lot of field tips and inserts....what poundage are the kids shooting?
Reply With Quote
  #6  
Old 10-21-2013, 03:20 PM
BigRackLover's Avatar
BigRackLover BigRackLover is offline
 
Join Date: Jun 2007
Location: Beaumont
Posts: 4,642
Default

Quote:
Originally Posted by Mike_W View Post
the extra $350 you save can buy a lot of field tips and inserts....what poundage are the kids shooting?
5- 45 lbs over the next bunch of years.
__________________
Check out my page, even like it perhaps
Reply With Quote
  #7  
Old 10-22-2013, 10:27 PM
bowhunter12 bowhunter12 is offline
 
Join Date: Aug 2012
Location: Alberta
Posts: 123
Default

At my uncles place we just use 3 giant pieces of old carpet and dangle it from above. we never go through the first carpet. We figured we would when we built it. The arrow justs hits the carpet and then the ground
Reply With Quote
  #8  
Old 10-23-2013, 06:41 AM
HillTophunter's Avatar
HillTophunter HillTophunter is offline
 
Join Date: Mar 2010
Posts: 315
Default Back stop

I usually round up a bunch of cardboard boxes for an archery back stop. I break down the boxes so they are turned into sheets. Then I lay them flat on ground figure out a size of backstop I want and start taping sheets of cardboard together! Once the size is figured just start adding more layers taping them down as you go ( holds everything together tightly and stops cardboard from shifting around). It might take a few tries to get the right thickness but when done it lasts a long time ( if stored properly ). Very easy to do and easy on the wallet too.
Reply With Quote
  #9  
Old 10-23-2013, 08:26 AM
BigRackLover's Avatar
BigRackLover BigRackLover is offline
 
Join Date: Jun 2007
Location: Beaumont
Posts: 4,642
Default

Quote:
Originally Posted by HillTophunter View Post
I usually round up a bunch of cardboard boxes for an archery back stop. I break down the boxes so they are turned into sheets. Then I lay them flat on ground figure out a size of backstop I want and start taping sheets of cardboard together! Once the size is figured just start adding more layers taping them down as you go ( holds everything together tightly and stops cardboard from shifting around). It might take a few tries to get the right thickness but when done it lasts a long time ( if stored properly ). Very easy to do and easy on the wallet too.
Yes, I've done the cardboard thing. Easy on the wallet - yes, but very hard to maintain, no outdoor life if it's not covered (especially) in winter. and the size of the backstop I want 10'x10' ..... too heavy and too ugly.

I want the netting or something that hang down from a support that can withstand weather.
__________________
Check out my page, even like it perhaps
Reply With Quote
  #10  
Old 10-23-2013, 09:14 AM
L.O.S.T.Arrow's Avatar
L.O.S.T.Arrow L.O.S.T.Arrow is offline
 
Join Date: Dec 2012
Location: Wainwright
Posts: 4,499
Default

Caution has to used with most backstop nets...although they will stop arrows from 40 lb bows ...your bow at 67Lbs will most likely send an arrow sizzleing right thru with little effort...

Make sure there is a poundage rating on net...

Neil
__________________
APA AIR
Reply With Quote
  #11  
Old 10-23-2013, 09:45 AM
BigRackLover's Avatar
BigRackLover BigRackLover is offline
 
Join Date: Jun 2007
Location: Beaumont
Posts: 4,642
Default

Quote:
Originally Posted by L.O.S.T.Arrow View Post
Caution has to used with most backstop nets...although they will stop arrows from 40 lb bows ...your bow at 67Lbs will most likely send an arrow sizzleing right thru with little effort...

Make sure there is a poundage rating on net...

Neil
Yup, been checking that - the bup shield has a high FPS rating
__________________
Check out my page, even like it perhaps
Reply With Quote
  #12  
Old 10-23-2013, 09:47 AM
BigRackLover's Avatar
BigRackLover BigRackLover is offline
 
Join Date: Jun 2007
Location: Beaumont
Posts: 4,642
Default

I'm leaving toward some 1/8 perserved plywood layers and some camo paint (haha). That and an arrow saw and many many inserts.
__________________
Check out my page, even like it perhaps
Reply With Quote
  #13  
Old 10-23-2013, 01:25 PM
L.O.S.T.Arrow's Avatar
L.O.S.T.Arrow L.O.S.T.Arrow is offline
 
Join Date: Dec 2012
Location: Wainwright
Posts: 4,499
Default

Quote:
Originally Posted by BigRackLover View Post
Yup, been checking that - the bup shield has a high FPS rating
Neat product but at near 10.00 a sq Foot its costly..and heavy also at 1 1/2 lbs per sq Ft...so even a 6" by 12 foot will be over $700.00 and 100 plus lbs

And IMHO 6 ft isnt high enough for youngsters..[even many adults ..look at the high celing in my indoor lanes lol]

could buy a lot of sq bales for 700.00...if its just for youngsters..

for you I agree on the plywood...after a couple of those you will try your darnest not to do it again...ha ha

JMHO
Neil
__________________
APA AIR
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:58 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.