|
06-06-2014, 12:18 AM
|
|
|
Join Date: Feb 2014
Posts: 16
|
|
Reloading for 300 Win Mag
Because of the extreme difficulty in finding ammunition I want to start reloading for my Sauer & Sohn mod 90 300 win mag. I have managed to get hold of Hornady brass and Barnes 180 gr TTSX bullets. I want to use the rifle for hunting elk and moose. I realize that one has to find the correct bullet and load for a specific rifle. Is there anyone out there that is prepared to share their secret recipes with me? It would be great if I could have a starting point that could save me a lot of bullets,powder and time.
Regards and thank you
Chris B
|
06-06-2014, 12:28 AM
|
Banned
|
|
Join Date: Apr 2013
Posts: 424
|
|
Quote:
Originally Posted by Chris B
Because of the extreme difficulty in finding ammunition I want to start reloading for my Sauer & Sohn mod 90 300 win mag. I have managed to get hold of Hornady brass and Barnes 180 gr TTSX bullets. I want to use the rifle for hunting elk and moose. I realize that one has to find the correct bullet and load for a specific rifle. Is there anyone out there that is prepared to share their secret recipes with me? It would be great if I could have a starting point that could save me a lot of bullets,powder and time.
Regards and thank you
Chris B
|
H-1000 or IMR-7828
|
06-06-2014, 12:30 AM
|
|
|
Join Date: Sep 2009
Location: Lethbridge
Posts: 2,045
|
|
You have good brass and bullets. Now track down some IMR or H 4831 or RL 22. iMR 7828 works well too, as does H 1000. Going to be hard to get powder keep your eyes open. Fed 215 m primers or whatever you can find for a mag rifle, start low and work up
__________________
"Unthinking respect for Authority is the greatest enemy of truth"
Albert Einstein
|
06-06-2014, 12:50 AM
|
|
|
Join Date: Mar 2011
Location: Fox Creek
Posts: 3,413
|
|
No shortcuts here; you have a good starting point. The only shortcut that is possible, is if someone had the rifle before you did and worked up a load.
Get a few good reloading books and start with some desirable powders. A little quicker way to get a good load developed is to pick up a Lee Hand Press and measure and shoot right at the range, with some brass ready to go.
Other than that, every component you change may have an effect on pressures velocity and accuracy.
__________________
Profanity and name calling are poor substitutes for education and logic.
Survivor of the dread covid
Pureblood!
|
06-06-2014, 06:34 AM
|
|
|
Join Date: Oct 2008
Posts: 511
|
|
My 300 loves 180 gr Nosler Accubonds, Federal 215 primers, 73.8 gr RL22
|
06-06-2014, 06:49 AM
|
|
|
Join Date: Sep 2007
Posts: 2,536
|
|
What do you have available to you for powder?
|
06-06-2014, 11:09 AM
|
|
|
|
Join Date: Aug 2009
Location: Lloydminster AB/SK
Posts: 1,349
|
|
FYI - I did pick up some H4831 at Cabelas south last weekend.
__________________
2011 Hoyt Carbon Element AP Camo, 60# (RKT Cams)
HDX rest
Hoyt Carbon Pro Sight
|
06-06-2014, 11:56 AM
|
|
|
|
Join Date: May 2007
Posts: 3,174
|
|
Quote:
Originally Posted by 6mmhunter
My 300 loves 180 gr Nosler Accubonds, Federal 215 primers, 73.8 gr RL22
|
Mine's almost the same, but 74.0 to 74.5gr of RL22.
Had other powders, never needed to try them.
I will through out another powder, Winchester Supreme 780. That is what Winchester uses in their Supreme and Elite ammo lines.
I never bothered to try the Barnes TSX's back then as I was super happy with the Accubonds and traded the TSX's I had for more Accubonds. The TTSX's would be a sweet bullet for sure. I have the BArnes Manual at home, if I get a chance this weekend, I will look up data. Might be just as fast to look on Hodgdon's website for info.
|
06-06-2014, 12:44 PM
|
|
|
Join Date: Jan 2013
Location: Calgary
Posts: 43
|
|
Quote:
Originally Posted by 6mmhunter
My 300 loves 180 gr Nosler Accubonds, Federal 215 primers, 73.8 gr RL22
|
Exactly what I was using, also, try 165 gr barnes tripple shock - you can push it up to about 76 gr RL22
|
06-06-2014, 01:23 PM
|
|
|
Join Date: Jun 2011
Location: Calgary
Posts: 854
|
|
I shoot the 180 accubond as well in my 300 using h1000 though.
Kevin
|
06-06-2014, 04:28 PM
|
|
|
Join Date: Jan 2013
Location: onoway, Ab
Posts: 7,236
|
|
Im using 75gr of H4831 and 180 gr hornady interlock in my 300. Flattens moose and elk pretty good
|
06-06-2014, 08:53 PM
|
|
|
Join Date: Apr 2011
Posts: 1,248
|
|
Nosler has a great online manual you can use. Just google nosler load data and you should be set.
__________________
Never celebrate till you got your knife stuck in it !
Some times you catch the Big fish, some times you get stuck in Chip
|
08-27-2014, 11:52 AM
|
|
|
Join Date: Dec 2012
Posts: 63
|
|
168 gr. Barnes TSX's using 77 gr. of RL22, 9.5 REm primers and Norma brass have been really accurate. Each gun seems to have it's own preference though.
|
08-27-2014, 07:58 PM
|
|
|
Join Date: Aug 2007
Location: Calgary
Posts: 936
|
|
Quote:
Originally Posted by FishHunterPro
Nosler has a great online manual you can use. Just google nosler load data and you should be set.
|
What this guy said,,,,,,, you don't know these people enough to trust your life on their info. Look on line at whatever bullet company you chose and load to their specs. Meet these people then you can make your own mind up wether you can trust your face to them. Loading is serious stuff so treat it with respect and knowledge.
|
08-27-2014, 09:19 PM
|
|
Gone Hunting
|
|
Join Date: May 2007
Location: Calgary
Posts: 1,708
|
|
180 TTSX out of 300 Win Mag. 36 inches penetration, entry 2" as it opened on twigs that you can see trapped under open petals.
I don't think that there are any frangible ( cup and Core) bullets getting to this Elk.
April 2012
September 2012
0.934-0.308=0.626"
__________________
From Wikipedia
"No safe threshold for lead exposure has been discovered—that is, there is no known amount of lead that is too small to cause the body harm."
150 TTSX vs Goat-WOW
http://youtu.be/37JwmSOQ3pY
|
08-29-2014, 10:10 AM
|
|
|
|
Join Date: Jun 2010
Posts: 1,024
|
|
Quote:
Originally Posted by sikwhiskey
You have good brass and bullets. Now track down some IMR or H 4831 or RL 22. iMR 7828 works well too, as does H 1000. Going to be hard to get powder keep your eyes open. Fed 215 m primers or whatever you can find for a mag rifle, start low and work up
|
x2, your rifle will tell you what it likes. You have good components so roll with it
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 02:13 AM.
|