Go Back   Alberta Outdoorsmen Forum > Main Category > Archery Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 04-26-2013, 03:46 PM
Riverbc's Avatar
Riverbc Riverbc is offline
 
Join Date: Apr 2011
Location: Abbotsford BC
Posts: 647
Default Comparing Ramcats to Slick Trick Mags.

Last week I stopped into WSS Nanaimo and thought I'd pick up another pack of Slick Trick Mags. They didn't have any, but as I was killing a little time, I thought I'd do some browsing. I saw the Smoke Ramcats on the shelf, and I remembered reading great reviews, so I grabbed a pack of 100 grains. The next day I was on a friends acreage and decided to compare the flight of the Ramcats to my field points. At 50 yards, bang on with my field points. I looked at the designed of the Ramcats, and could see how they would force the arrow to spin, thereby increasing accuracy. Nice! The head itself is a hybrid. The normal position of the blades are swept back, but in the event of not passing through, the blades are sharpened front and back. So any opposite force, like an animal running with the arrow in it, the blades would move into a 90 degree angle, and do more damage as the arrow worked it's way back out, hopefully causing a larger blood trail.
So compared to the 4 blade Slick Trick Mag, the Ramcat is a 3 blade head, with larger blades. The trocar tip is larger than the ST Mags. It flies the same as ST's on my bow. The blades are out of the package sharp, (front and back) just like STs. The blades of the Ramcat don't seem as thick or strong as the ST's, but I do believe they will do some major damage on an animal if the shot is where it's suppose to be. I think a shoulder shot may be more of an issue with the Ramcats. The one thing, that don't care for with the Ramcats, is that after one shot into a broadhead target the blades were quite loose. I had to tightened them up with a .050 hex key, which is a little inconvenient if you don't happen to have one with you.
So... I will use the Ramcats and Slick Trick Mags for deer this year. I hope I will be able to compare their performance on animals, and post the results. Now comes the long wait until deer season!
Attached Images
File Type: jpg ram vs st.jpg (56.8 KB, 184 views)
Reply With Quote
  #2  
Old 04-26-2013, 04:54 PM
Zuludog's Avatar
Zuludog Zuludog is offline
 
Join Date: Dec 2010
Location: Beaumont
Posts: 3,389
Default

Keep us informed. I'd be very interested to see how they perform.
__________________
The kill is the satisfying, indeed essential, conclusion to a successful hunt. But, I take no pleasure in the act itself. One does not hunt in order to kill, but kills in order to have hunted. Then why do I hunt? I hunt for the same reason my well-fed cat hunts...because I must, because it is in the blood, because I am the decendent of a thousand generations of hunters. I hunt because I am a hunter.- Finn Aagard
Reply With Quote
  #3  
Old 04-26-2013, 09:53 PM
Sakoman's Avatar
Sakoman Sakoman is offline
 
Join Date: May 2007
Posts: 1,776
Default

Tried some ramcats last year. Was testing them out to see how they flew at 60 yards. Pulled it out of my target and one blade was bent. That was the end of my Ramcat testing.
Reply With Quote
  #4  
Old 04-27-2013, 12:16 AM
Mike_W's Avatar
Mike_W Mike_W is offline
 
Join Date: May 2007
Location: Stony Plain
Posts: 6,433
Default

My dad tried ramcats the screws holding the blades rattled out in transport. That was the end of the ramcats for him.
Reply With Quote
  #5  
Old 04-27-2013, 08:53 AM
Riverbc's Avatar
Riverbc Riverbc is offline
 
Join Date: Apr 2011
Location: Abbotsford BC
Posts: 647
Default

yes...seems like those screws loosening can be an issue.
Reply With Quote
  #6  
Old 04-28-2013, 04:28 PM
ForwardBias ForwardBias is offline
 
Join Date: Apr 2013
Location: West central AB
Posts: 1,545
Default

Quote:
Originally Posted by Mike_W View Post
My dad tried ramcats the screws holding the blades rattled out in transport. That was the end of the ramcats for him.
2x
Reply With Quote
  #7  
Old 04-28-2013, 05:22 PM
Riverbc's Avatar
Riverbc Riverbc is offline
 
Join Date: Apr 2011
Location: Abbotsford BC
Posts: 647
Default

they claim to have fixed the loose screw issue. I must have got old stock.

http://www.youtube.com/watch?v=8syTz...ature=youtu.be
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:11 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.