|
02-18-2017, 09:49 AM
|
|
|
|
Join Date: Oct 2009
Location: edmonton
Posts: 1,848
|
|
Vertical pin sight
Does anyone use the trophy ridge vertical pin sight i have the react 5 right now.
|
02-18-2017, 10:58 AM
|
|
|
|
Join Date: Jul 2009
Location: GP AB
Posts: 16,239
|
|
I used one for quite a while, when I first got into archery, and liked it at the time. Since then have gone to a Spot Hogg 5 pin Hunter, and really appreciate how bright the pins are with the full wrap. I also find it a very rugged sight.
__________________
'Once the monkeys learn they can vote themselves a banana, they'll never climb another tree.'. Robert Heinlein
'You can accomplish a lot more with a kind word and a gun, than with a kind word alone.' Al Capone
|
02-18-2017, 01:55 PM
|
|
|
|
Join Date: Jan 2011
Location: Edmonton, Ab.
Posts: 2,038
|
|
I used one for about 3 months. I didn't really like it that much. Just personal preference, and shooting style though. I shoot off the side of the string with no peep. So I found that I was consistently hitting right or left. I switched back to horizontal pins and the problem went away! Pretty nice sights otherwise though! If you're not as picky as me, you should be able to make them work for you.
__________________
Hunting... The one vice, i'll never give up!
|
02-18-2017, 04:42 PM
|
|
|
Join Date: Jan 2009
Posts: 1,016
|
|
I've been using one for a couple years now, no issue's with it. Like it a bit better than horizontal pins, but both work fine. Wish it had a little more horizontal adjustment, as I shoot with no peep and an Anchor sight, so need some extra adjustment.
|
02-19-2017, 01:29 PM
|
|
|
|
Join Date: Oct 2009
Location: edmonton
Posts: 1,848
|
|
Thanks guys im going to stick with my react 5 pin
Now to source down a broadhead for moose and elk i want to try something different then my G5
|
02-19-2017, 01:50 PM
|
|
|
|
Join Date: Jan 2011
Location: Edmonton, Ab.
Posts: 2,038
|
|
Slick trick standards. 4 blade 100 gr. fixed blade heads. One inch diameter. I made a crap shot on a deer this year at 20 yards. Ended up hitting spine. One blade broke, and the impact busted the shaft of the arrow, so the insert is still attached in the picture. Ferrule does not seem bent. I'm sold on these for good now! You could always get the magnums, the cutting diameter is increased by an 1/8 inch over the standards.
__________________
Hunting... The one vice, i'll never give up!
|
02-19-2017, 10:46 PM
|
|
|
Join Date: Jun 2013
Posts: 243
|
|
Quote:
Originally Posted by bezzola
Thanks guys im going to stick with my react 5 pin
Now to source down a broadhead for moose and elk i want to try something different then my G5
|
I love my Montec G5s
Tried the stainless version last year, was able to get them sharper but then they rusted on me when I got caught in an early season snow storm -- rusted by the time I got home. pain to clean up mid-season
So back to the stainless model
I may try a very traditional two blade design like the Grizzlystick or Silver flame or German Kinetic
http://www.grizzlystik.com/default.aspx
pros and cons with everything though
The only thing I would not use in field are mechanical
|
02-25-2017, 07:20 AM
|
|
|
Join Date: Jan 2011
Posts: 9
|
|
Quote:
Originally Posted by bowhunter9841
Slick trick standards. 4 blade 100 gr. fixed blade heads. One inch diameter. I made a crap shot on a deer this year at 20 yards. Ended up hitting spine. One blade broke, and the impact busted the shaft of the arrow, so the insert is still attached in the picture. Ferrule does not seem bent. I'm sold on these for good now! You could always get the magnums, the cutting diameter is increased by an 1/8 inch over the standards.
|
I found the Magnums hit my riser and didn't fly as well. I'd stick with standard. I have those and grim reaper mechanicals.
|
02-25-2017, 10:29 PM
|
|
|
|
Join Date: Jan 2011
Location: Edmonton, Ab.
Posts: 2,038
|
|
Quote:
Originally Posted by Bambino
I found the Magnums hit my riser and didn't fly as well. I'd stick with standard. I have those and grim reaper mechanicals.
|
Thanks for the tip, I've never used the magnums myself. But I do love the standards.
__________________
Hunting... The one vice, i'll never give up!
|
02-27-2017, 07:58 AM
|
|
|
|
Join Date: Mar 2009
Posts: 1,519
|
|
Quote:
Originally Posted by bowhunter9841
Slick trick standards. 4 blade 100 gr. fixed blade heads. One inch diameter. I made a crap shot on a deer this year at 20 yards. Ended up hitting spine. One blade broke, and the impact busted the shaft of the arrow, so the insert is still attached in the picture. Ferrule does not seem bent. I'm sold on these for good now! You could always get the magnums, the cutting diameter is increased by an 1/8 inch over the standards.
|
Your broadhead is crappy and fell apart and you are sold on them? I think the only ones that handle bones(which most animals need to stand up) are the grizz trick.
Get a fixed solid head that will hold itself together. Montec, VPA, Bishop, Cutthroat, exodus or shuttle T also pretty tough for blade swapper heads.
__________________
"We're not polishing fine china here"-Belichick.
|
02-27-2017, 10:29 AM
|
|
|
|
Join Date: Jan 2011
Location: Edmonton, Ab.
Posts: 2,038
|
|
Quote:
Originally Posted by reddeerhunter
Your broadhead is crappy and fell apart and you are sold on them? I think the only ones that handle bones(which most animals need to stand up) are the grizz trick.
Get a fixed solid head that will hold itself together. Montec, VPA, Bishop, Cutthroat, exodus or shuttle T also pretty tough for blade swapper heads.
|
All I have to do is put some replacement blades in this head, and it should be good to go. They fly good, they're not overly expensive, and they will do some damage when put in the right spot. As a bow hunter I don't shoot at bone on purpose. I'll stick to what I like. Maybe in the future I'll try something new, but for now, slick trick gets my money.
__________________
Hunting... The one vice, i'll never give up!
|
02-27-2017, 10:40 AM
|
|
|
|
Join Date: Mar 2009
Posts: 1,519
|
|
Quote:
Originally Posted by bowhunter9841
All I have to do is put some replacement blades in this head, and it should be good to go. They fly good, they're not overly expensive, and they will do some damage when put in the right spot. As a bow hunter I don't shoot at bone on purpose. I'll stick to what I like. Maybe in the future I'll try something new, but for now, slick trick gets my money.
|
So you aim for guts?
Sent from my iPhone using Tapatalk
__________________
"We're not polishing fine china here"-Belichick.
|
02-27-2017, 10:47 AM
|
|
|
|
Join Date: Dec 2010
Location: Look behind you :)
Posts: 27,780
|
|
Quote:
Originally Posted by reddeerhunter
So you aim for guts?
Sent from my iPhone using Tapatalk
|
I don't consider ribs bone....even though they are. I think he means leg and shoulder. You have to pretty much plan on encountering ribs with the highest percentage type kills shots on any game.
LC
__________________
|
02-27-2017, 10:51 AM
|
|
|
|
Join Date: Mar 2009
Posts: 1,519
|
|
I know.
I was just playing. Bear season is far away so boredom is a factor.
Sent from my iPhone using Tapatalk
__________________
"We're not polishing fine china here"-Belichick.
|
02-27-2017, 11:16 AM
|
|
|
|
Join Date: Mar 2009
Posts: 1,519
|
|
Lefty, how does say 80% of mechanicals look after you sling em thru rib cages? Just looking for your personal life experience. Just curious if EVERY head thru the boiler straight broadside should come out fine even if rib smacked in and out.
I had Magnus Stinger completely snap off/ disappear, used toxic and the head looked 100%, Montecs were just fine, just for elk in these cases.
Deer I have always had heads look same after release unless they hit stuff on other side(rock/tree/etc). And had a black bear bend the tip of a fixed blade VPA 3 blade somehow.
Also crimson talons wreak havoc on bears and mules. No damage.
Any more slick trickers or expandables?
__________________
"We're not polishing fine china here"-Belichick.
|
02-27-2017, 12:31 PM
|
|
|
|
Join Date: Dec 2010
Location: Look behind you :)
Posts: 27,780
|
|
Quote:
Originally Posted by reddeerhunter
Lefty, how does say 80% of mechanicals look after you sling em thru rib cages? Just looking for your personal life experience. Just curious if EVERY head thru the boiler straight broadside should come out fine even if rib smacked in and out.
I had Magnus Stinger completely snap off/ disappear, used toxic and the head looked 100%, Montecs were just fine, just for elk in these cases.
Deer I have always had heads look same after release unless they hit stuff on other side(rock/tree/etc). And had a black bear bend the tip of a fixed blade VPA 3 blade somehow.
Also crimson talons wreak havoc on bears and mules. No damage.
Any more slick trickers or expandables?
|
The Grim Reapers I use look like new....I treat broadhead as a consumable, once they zip through an animal they get retired.
Exit
Entrance
LC
__________________
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 03:31 AM.
|