Polaris bushings for front "A" arms
Was having some clunking in the front end of my 2010 XP EPS 850 Polaris.
I put it up on blocks, pulled front wheels and both L&R lower A arm bushings have a lot of slop.
I greased them up and it took up some slop but after another week or so of riding, the grease worked it way out and its loose again.
The bushings are hard polly, obviously wearing, not sure if this is the best material for a bushing.
Anyone know if there are any replacement bushings of better material for my quad ?
TBark
|