Go Back   Alberta Outdoorsmen Forum > Main Category > General Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 05-15-2018, 10:26 AM
Kurt505 Kurt505 is offline
Banned
 
Join Date: May 2009
Location: Communist state
Posts: 13,245
Default Thinking about a jet boat

Been tossing the idea around for a few years, still on the fence about taking the plunge. I've got a 17' Lund pro sport that's been an extremely fun and reliable boat, but with the boys getting bigger I'm thinking about getting a bit bigger boat. Always wanted a jet boat but have shy'd away because of maintenance and cost of operating compared to a regular outboard motor.

Can anyone enlighten me on the facts about running a newer jet boat with like a 200 or 240 merc optimax engine? Or maybe suggest a more efficient engine to run? I'd like a boat in the 19'-21' range, something I can camp in and an open bow. I don't want to buy new, $60-$90k is definetly not in the budget, I'd like to get the most I can out of $40k max.

Last edited by Kurt505; 05-15-2018 at 10:44 AM.
Reply With Quote
  #2  
Old 05-15-2018, 10:49 AM
RavYak's Avatar
RavYak RavYak is offline
 
Join Date: Jul 2011
Location: West Edmonton
Posts: 5,174
Default

Are you talking about a boat to replace your current one and will primarily use it on lakes? I would only buy a jet boat if you are primarily going to fish the river.

Edit: Just remembered there are a couple lake version jet boats available like seadoo jet boats. Don't know of any for fishing though?
Reply With Quote
  #3  
Old 05-15-2018, 10:55 AM
Kurt505 Kurt505 is offline
Banned
 
Join Date: May 2009
Location: Communist state
Posts: 13,245
Default

I want a duel purpose, lake/river boat. I realize it won't be the best for both worlds, something I can take on the Fraser or the Shuswap. From what I've researched a 12 degree hull is kinda what would work best.


Not fiberglass
Reply With Quote
  #4  
Old 05-15-2018, 11:16 AM
skidderman skidderman is offline
 
Join Date: Dec 2009
Location: Spruce Grove, AB
Posts: 3,039
Default

I guess some guys have had luck with sportjets but I've heard a few first hand horror stories. One guy at Slave Lake a couple years ago had a brand new set up. Engine cratered on first trip. Another person in BC had to get a new sportjet flown in by helicopter c/w mechanic. Mine had a 350 chev and it was no worse on fuel than my 150 4 stroke outboard. It was reliable & easy to maintain. Burned 6 to 8 gallons an hour. If I was to do it again I would likely be looking at a 150 converted to a jet on an 18 or 19 foot boat. Other things to consider are.
Make sure your windshield is high enough so you don't have to duck to look through.
An open bow or sunken bow is nice for anchor retrieval
A flat dash is nice for mounting electronics. Mine wasn't & it was a pain
If inboard a doghouse style engine cover is great for fishing
Lots of things to consider.
Reply With Quote
  #5  
Old 05-15-2018, 11:46 AM
Ken07AOVette's Avatar
Ken07AOVette Ken07AOVette is offline
 
Join Date: Dec 2008
Location: Alberta
Posts: 24,072
Default

I can just see You, lying in bed bored of watching old movies until you watched night at the Roxbury.
I SHOULD BUY A BOAT!!!!!

I agree, you should!

__________________
Only dead fish go with the flow. The rest use their brains in life.


Originally Posted by Twisted Canuck
I wasn't thinking far enough ahead for an outcome, I was ranting. By definition, a rant doesn't imply much forethought.....
Reply With Quote
  #6  
Old 05-15-2018, 12:07 PM
Kurt505 Kurt505 is offline
Banned
 
Join Date: May 2009
Location: Communist state
Posts: 13,245
Default

Quote:
Originally Posted by Ken07AOVette View Post
I can just see You, lying in bed bored of watching old movies until you watched night at the Roxbury.
I SHOULD BUY A BOAT!!!!!

I agree, you should!

Hahaha!
Reply With Quote
  #7  
Old 05-15-2018, 12:24 PM
Red Bullets's Avatar
Red Bullets Red Bullets is offline
 
Join Date: Oct 2010
Location: central Alberta
Posts: 12,627
Default

Just to let you know... The Alta. govt surplus has a jet boat on auction right now for another 7 days. might be a heck of a deal.

https://surplus.gov.ab.ca/OA/ItemDet...uctionID=14583
__________________
___________________________________________
This country was started by voyagers whose young lives were swept away by the currents of the rivers for ten cents a day... just for the vanity of the European's beaver hats. ~ Red Bullets
___________________________________________
It is when you walk alone in nature that you discover your strengths and weaknesses. ~ Red Bullets
Reply With Quote
  #8  
Old 05-15-2018, 12:44 PM
Stubb Stubb is online now
 
Join Date: Aug 2013
Posts: 382
Default

I have a sport jet and really like it but the boat you're describing is quite a bit different than mine. If you are planning on a 20' 12 degree and putting 3 or 4 guys in it consistently with gear you'll want a 350 period.
Reply With Quote
  #9  
Old 05-15-2018, 12:47 PM
MooseRiverTrapper MooseRiverTrapper is offline
 
Join Date: Jul 2014
Posts: 1,902
Default

Kurt, go to gibbons and check out a kingfisher 1875 with a 200 opti. It is a great boat that can do everything you need it do in Alberta. Also did the lower Fraser a few times which is not a big deal really. I just sold mine and switched over to a lake boat for awhile. Mine had a 12 degree deadrise and I went everywhere with it lake or river. If you want to buy new there is quite the price jump from an optimax to the Kodiak 350.

Last edited by MooseRiverTrapper; 05-15-2018 at 12:57 PM.
Reply With Quote
  #10  
Old 05-15-2018, 01:03 PM
RavYak's Avatar
RavYak RavYak is offline
 
Join Date: Jul 2011
Location: West Edmonton
Posts: 5,174
Default

Quote:
Originally Posted by Kurt505 View Post
I want a duel purpose, lake/river boat. I realize it won't be the best for both worlds, something I can take on the Fraser or the Shuswap. From what I've researched a 12 degree hull is kinda what would work best.


Not fiberglass
12 degree would work ok but that is just your typical big river boat so unless you are planning to primarily use it as a river boat it wouldn't be my personal choice.

If you want something better for both I think 16 degree would be worth looking at. You will still be able to run almost anywhere on bigger rivers like the Fraser, Athabasca or even NSR and it should handle rougher water and lakes better too.

If it is mainly the Fraser you are interested in doing and you are not that interested in NSR etc I would just get a lake boat and be careful where you go. There are lots of spots you could easily fish with an outboard out there just need to be a bit careful when beaching fish.

If you have the space you could just get a river boat for at home and use your lake boat when at the Fraser(assuming you want to do it and Shuswap at same time).

Just ideas, if you are going to spend most of your time on lakes I would prefer a Lund Tyee or something like that rather then compromising just to be able to fish a river once in a while.
Reply With Quote
  #11  
Old 05-15-2018, 01:06 PM
ghostguy6's Avatar
ghostguy6 ghostguy6 is offline
 
Join Date: Apr 2009
Location: edmonton
Posts: 3,116
Default

You couldn't handle a BMX, are you sure you want something with a large motor behind it?
__________________
" Everything in life that I enjoy is either illegal, immoral, fattening or causes cancer!"

"The problem was this little thing called the government and laws."
Reply With Quote
  #12  
Old 05-15-2018, 03:14 PM
Kurt505 Kurt505 is offline
Banned
 
Join Date: May 2009
Location: Communist state
Posts: 13,245
Default

Quote:
Originally Posted by ghostguy6 View Post
You couldn't handle a BMX, are you sure you want something with a large motor behind it?
Hahaha!

I'll get my boy to get his boating license and just ride co-pilot.
Reply With Quote
  #13  
Old 05-15-2018, 03:20 PM
leeelmer leeelmer is offline
 
Join Date: Jul 2010
Location: Rocky Mnt House
Posts: 932
Default

The biggest problem Kurt is then it is not great on the river and worse on the lakes, no comparison to a deep v boat when the waves come up.
They burn twice the fuel, so be prepared to pay for way more gas,
They are hard to run in a straight line when trolling with a trolling motor because the hull is a lot more flat.
But I understand looking for a dual purpose boat so you can do both, understand a jet does not steer well without some power going to the jet drive, so navigating a small creek slow speed is a no go, you need to go fast(think small river getting into a big lake)
200HP jet drive is like having a 150HP prop so don't expect the same performance as a 200HP out board.
But it is a lot of fun on the river, big toss up for sure. I am a lake guy and like my deep v, but I fish with buddies that have cross over jet drives, and been in a few dedicated river boats, they are all fun.
Reply With Quote
  #14  
Old 05-15-2018, 03:27 PM
nube nube is offline
 
Join Date: May 2007
Location: In a house
Posts: 7,778
Default

I just bought an 18 foot Jon Boat. I love it. I got a 50hp Tahatsu prop but wish I went with a 50 or 60 Jet now after running a river. I'm like you and want the best of both worlds. I'm going to use mine for duck hunting and running a few rivers as well as fishing. I might try and get a jet bottom half on it and give it a go in some lakes and see what happens
Reply With Quote
  #15  
Old 05-15-2018, 05:06 PM
hayseed's Avatar
hayseed hayseed is offline
 
Join Date: Apr 2008
Posts: 5,647
Default

Quote:
Originally Posted by ghostguy6 View Post
You couldn't handle a BMX, are you sure you want something with a large motor behind it?
Omg!!!!! LMAO!!!!!

I think I have just set the new world record for distance of beer spewed outa the nostrils !!!!

Now that was funny, sorry Kurt, long day in the patch, and had a good laugh.

Sorry for the derail, hope you are feelin better, and find a nice boat!!
Reply With Quote
  #16  
Old 05-15-2018, 05:11 PM
catnthehat's Avatar
catnthehat catnthehat is offline
 
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,529
Default

Many of the bigger boats up here are running 12 gegree hulls )the guy's at my boat shop run them as well) but I also see lots of boats a but deeper , 16 and 18 degrees even.'mine is made fir skinny water so it's only 5 degrees but it is a smaller boat as well with a 130 Sport Jet .
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
Reply With Quote
  #17  
Old 05-15-2018, 06:10 PM
ROA ROA is offline
 
Join Date: Mar 2008
Location: Under your stairs
Posts: 633
Default

I owned both a Lund 17 fisherman which was the next model up from your pro sport and a Kingfisher 1875 sport jet 12* Hull at the same time for one summer. The kingfisher is BETTER and SAFER in rough water than the POS Lund was. They ride about the same through the chop (pound your guts out) the only advantage the Lund had was being able to trim the motor to affect bow height but still it was a draw for ride. If you did want to pound through the waves that weak ass Lund could never be able to take it for long. Next thing I know every screw is coming loose and rivets are starting to leak.

In the big water the kingfisher is miles better, full height transom and recessed bow with scupper drains that keeps water up front and does not let it flow right through to the stern. When that Lund would take a wave over the front it ended up in the bilge. Also that low transom would take water over the stern and into the bilge it went.


Down side to the Kingfisher is the POS Merc 2 stroke sport jet. They can blow up anytime between 1 and 1000 hours. Mine was good though. Also they do burn a bit more fuel 200hp at the jet (250hp optimax power head) compared to a smaller outboard that was half the Hp. Also the Lund was way wider and more stable at rest. 2 guys leaning over one side would tip much less than one guy leaning over the side of the Kingfisher. Another downside is the jet is hard to control at low speeds and reverse sucks bad. I maneuver with the kicker if I have to.

I took both boats to the limit and beyond. FWIW I sold the Lund and have not regretted it even for one second. I run rivers and lakes about 50/50 and the one boat does it all.

Last edited by ROA; 05-15-2018 at 06:39 PM.
Reply With Quote
  #18  
Old 05-15-2018, 06:44 PM
Ken07AOVette's Avatar
Ken07AOVette Ken07AOVette is offline
 
Join Date: Dec 2008
Location: Alberta
Posts: 24,072
Default

you know, come to think of it, while you are laying there in your drug induced stupor, it is a good thing you were watching Roxbury and not the Birdcage
__________________
Only dead fish go with the flow. The rest use their brains in life.


Originally Posted by Twisted Canuck
I wasn't thinking far enough ahead for an outcome, I was ranting. By definition, a rant doesn't imply much forethought.....
Reply With Quote
  #19  
Old 05-15-2018, 08:37 PM
Dubious Dubious is offline
 
Join Date: Jan 2012
Location: Calgary
Posts: 1,521
Default

these micro jet boats look pretty sweet just might be hard to put a moose in one.

https://www.jetstreamboats.com
Reply With Quote
  #20  
Old 05-15-2018, 08:39 PM
Arty Arty is offline
 
Join Date: Jul 2012
Location: one Fort or another
Posts: 768
Default

Might be interesting getting a fire hose/nozzle fitting which could hook into the jet output port, for a little more camp protection during dry season...

Anyway, how about making your own aluminum jet boat from plans? Build exactly the length and hybrid multi-chine hull type you need, stronger, better-built with better fittings and maybe cheaper than commercial. Most metal ocean cruisers have gone over to aluminum as the welding is well-known now, 30% stronger than steel by weight, and much more impact resistant than foam-core fiberglass composite. I'd guess 50K would get you one helluva nice new 20-foot v8 jet boat.
Reply With Quote
  #21  
Old 05-15-2018, 09:00 PM
Kurt505 Kurt505 is offline
Banned
 
Join Date: May 2009
Location: Communist state
Posts: 13,245
Default

Quote:
Originally Posted by Arty View Post
Might be interesting getting a fire hose/nozzle fitting which could hook into the jet output port, for a little more camp protection during dry season...

Anyway, how about making your own aluminum jet boat from plans? Build exactly the length and hybrid multi-chine hull type you need, stronger, better-built with better fittings and maybe cheaper than commercial. Most metal ocean cruisers have gone over to aluminum as the welding is well-known now, 30% stronger than steel by weight, and much more impact resistant than foam-core fiberglass composite. I'd guess 50K would get you one helluva nice new 20-foot v8 jet boat.
If I had the room to do that I'd be all over it.
Reply With Quote
  #22  
Old 05-15-2018, 11:10 PM
skidderman skidderman is offline
 
Join Date: Dec 2009
Location: Spruce Grove, AB
Posts: 3,039
Default

I once looked at building my own. At one time Outlaw Marine sold kits c/w all pre stressed/bent panels, fuel tank kit & so on. Then you need a jig to weld it on so the boat doesn't warp. At that time Outlaw would rent a jig out as well. Was concerned with my welding skills so backed out. Personally I think it would have been a nightmare. As well if you go to sell a custom boat with no name brand I think selling might be difficult. If I was a practised aluminium welder I might have thought different.
Reply With Quote
  #23  
Old 05-15-2018, 11:31 PM
RavYak's Avatar
RavYak RavYak is offline
 
Join Date: Jul 2011
Location: West Edmonton
Posts: 5,174
Default

I'd find someone on here etc with a boat similar to what you are thinking would be good and go take it to a lake to see how it works for you there.
Reply With Quote
  #24  
Old 05-16-2018, 11:22 AM
RUSTY262 RUSTY262 is offline
 
Join Date: Sep 2009
Posts: 64
Default 1975 fastwater

i have a 1975 fastwater from harbercraft with a 200 sportjet that i use on the river, ocean and lake. Tubing and skiing with kids, downrigging for salmon, running skinny on the north saskatchewan. Burns about 4 gal/hr at 30 mph.
incredibly good on fuel and does well at all i want it to do. Love the boat. Incredible handling on the river and easy to troll with a 8hp kicker for 12 plus hours a day on my salmon trip i do each summer. Couldn't think of a better boat for a doall boat in alberta.
Reply With Quote
  #25  
Old 05-16-2018, 12:03 PM
ROA ROA is offline
 
Join Date: Mar 2008
Location: Under your stairs
Posts: 633
Default

Your experience sounds similar to mine but your boat is a little better do-all.
While I do like my 1875 if I were to do it all over and make the choice between it and the 1975 and its extra foot of length, integrated kicker mount and 14* Hull I’d go with the 1975.


Something else to ponder is hull degree “rating” is almost always just an average degree “rating” as the fore, amidships and aft hull degrees vary. So for a guy shopping it is best to see the bottom in person (if you know what to look for) and get the actual degree from the manufacturer at the 3 points.
Reply With Quote
  #26  
Old 05-17-2018, 03:42 AM
rem338win's Avatar
rem338win rem338win is offline
 
Join Date: Oct 2007
Location: Cowtown, agian
Posts: 2,812
Default

http://www.thunderjet.com/build-your...alexisjet#gf_7

I've used near the same boat on the Shu' the Fraser and a couple other lakes and system. Older model with the same features. I've been on the Shu' fishing 4' swells without issue.

I've been in quite a few jets and I will only go Thunderjet now. Build quality, design, etc is the best bang for the buck. If you do go jet make sure you get the full fishing platform. It's a way more usable boat.

Currently we have a the 20' with an outboard and do most of the same (I've run ours in the outboard in 2' of water without issue).

Buy once cry once.......
__________________
The inherent vice of capitalism is the unequal sharing of blessings; the inherent virtue of socialism is the equal sharing of miseries.
- Sir Winston Churchill

A body of men holding themselves accountable to nobody ought not to be trusted by anybody.
-Thomas Paine
Reply With Quote
  #27  
Old 05-17-2018, 08:37 AM
Kurt505 Kurt505 is offline
Banned
 
Join Date: May 2009
Location: Communist state
Posts: 13,245
Default

Quote:
Originally Posted by rem338win View Post
http://www.thunderjet.com/build-your...alexisjet#gf_7

I've used near the same boat on the Shu' the Fraser and a couple other lakes and system. Older model with the same features. I've been on the Shu' fishing 4' swells without issue.

I've been in quite a few jets and I will only go Thunderjet now. Build quality, design, etc is the best bang for the buck. If you do go jet make sure you get the full fishing platform. It's a way more usable boat.

Currently we have a the 20' with an outboard and do most of the same (I've run ours in the outboard in 2' of water without issue).

Buy once cry once.......

Skeena jet!

I'd have to sell my boat, side by side, quad, rifles, bows, a truck and then all I'd have to do is remortgage my house to get one of those. I would absolutely love one of those but at $120k it's just not in my cards

Beautiful boat for sure.
Reply With Quote
  #28  
Old 05-17-2018, 12:44 PM
Albertacoyotecaller Albertacoyotecaller is offline
 
Join Date: Jun 2007
Posts: 1,021
Default

I am in the same “boat” as you currently. Looking for a river boat. Have a Bayliner 175 currently that I will get rid of to buy the jet boat. With friends having both the two stroke and 4 stroke motors, I agree that getting the 350 or 383 is a better idea than the 2 stroke.

On degree of hull, you will never get the perfect set up for both lake and river. It’s going to be a compromise. I think going 12 degree is probably the best you can do. I will be boating mainly the Peace and Slave Lake. I am not sure how skinny I will be able to go with a 12 degree.

Same $ amount as well. I want to spend no more than $40k
__________________
Visit the Peace Country Fish & Game Association

PCFGA on Facebook
Reply With Quote
  #29  
Old 05-17-2018, 01:53 PM
RUSTY262 RUSTY262 is offline
 
Join Date: Sep 2009
Posts: 64
Default jet

https://www.kijiji.ca/v-powerboat-mo...ationFlag=true

this would be a fantastic boat with cutaway for trolling motor
much nicer than new design of trolling on swim platform and can't reach the trolling motor handle
VERY IMPORTANT just make sure it is the 200 sportjet not the 240 or 175
Reply With Quote
  #30  
Old 05-17-2018, 05:25 PM
brokenbones4 brokenbones4 is offline
 
Join Date: Oct 2011
Posts: 84
Default

Speak to Steve at firefish, I have been looking at boats for awhile also, he can email a build sheet that has pricing for different options, you can customize the boat to fit your needs and price, I was looking at a 17' piranha and was pleasantly surprised at the price. Some of the nicest boats around, and made in Alberta!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 10:53 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.