are slick trick grizztrick 2 legal to hunt with?

[chironomidkraut]

i really like the look of this broadhead! so my question is acording to the alberta regulations book it states that "an arrow that has a tip that bears a head that is not intentionally designed to resist being withdrawn after it has penetrated an object. Furthermore, it must either have a solid, sharp cutting head of at least 7/8 inch in width, or a head that, when the arrow impacts, opens to present sharp cutting edges at least 7/8 inch in width.
so these heads look like they could resist when pulling out of a critter, so does that make them illigal?
here is a pic of them
slick-trick-2-broadhead.jpg

[Mike_W]

I wouldnt consider that "barbed" myself and just fine to hunt with!!

[H380]

Originally Posted by Mike_W

I wouldnt consider that "barbed" myself and just fine to hunt with!!

same by me , slick tricks are a great broadhead , strong and accurate .

[280remington]

Cant see it being an issue alot of people would be breakin the law if they were illegal.including myself! They fly great

[chironomidkraut]

Ok thanks guys, I will be trying the ST grizz 2, nap killzones, this year see which one flies better for me and better penetration. Last year was the Magnus buzzcuts!
can someone post a pic of what an illigal broadhead would look like, I am curious

[Riverbc]

[chironomidkraut]

thanks, so i guess any back angle of the rear blade beyond 90 degrees is illegal then!
is that top pic of the qad exodus? heard good things about the full blade model

[brohymn2]

yup thats the exodus, also have heard good things

[L.O.S.T.Arrow]

:d Many shooters love all the Slick tricks and are very succesful with them...

Neil

[munyee4321]

Originally Posted by Riverbc

legal in alberta.....

[archer8]

Hi Guys

Going to try 1 of these -- can anyone let me know there thoughts -- want to get away from mechanicals -- heard good things on both ---

Shooting a APA Black Mamba @ 65lbs
100 gr arrows
310" draw
Starting to shoot for this yr next week !

Hunt Hard in 212

Pls Pm me and let me know

Cheers

Ian

[H380]

Originally Posted by archer8

Hi Guys

Going to try 1 of these -- can anyone let me know there thoughts -- want to get away from mechanicals -- heard good things on both ---

Shooting a APA Black Mamba @ 65lbs
100 gr arrows
310" draw
Starting to shoot for this yr next week !

Hunt Hard in 212

Pls Pm me and let me know

Cheers

Ian

Like your choice of bows but think maybe your numbers are a little mixed up 100 gr arrows seems REAL light and 310" draw ?

[Riverbc]

I shoot Slick Trig Mags and love them. I've heard good things from other peeps about Ramcats. Only negative thing I heard about them is the blades can loosen up and flop a bit. Anyone that shoots them had an issue with this?

[chironomidkraut]

Well I shot the grizz's today along with my killzones and the slick tricks were shooting about 3" low and 2"left, but the killzones were dead on out to 40yds and my bow is set up to perfection, and my arrows are a little on the stiff side just to be safe, slick tricks claim to have field point accuracy, but I didn't see that at all, my buzzcuts were dead on out to 40yds to, any suggestions on what could be causing this erratic ST flight

[brendan's dad]

Originally Posted by chironomidkraut

Well I shot the grizz's today along with my killzones and the slick tricks were shooting about 3" low and 2"left, but the killzones were dead on out to 40yds and my bow is set up to perfection, and my arrows are a little on the stiff side just to be safe, slick tricks claim to have field point accuracy, but I didn't see that at all, my buzzcuts were dead on out to 40yds to, any suggestions on what could be causing this erratic ST flight

I know I might get the gears for this but I was having similar results as u described. I lined up my "cock vane" with 1 of the 4 blades and the problem was eliminated. I didn't even expect it to work but it did, and I am hitting with my FP's out to 50 yards

[blackmamba]

Originally Posted by Riverbc

I shoot Slick Trig Mags and love them. I've heard good things from other peeps about Ramcats. Only negative thing I heard about them is the blades can loosen up and flop a bit. Anyone that shoots them had an issue with this?

I tried Ramcats this year .. i had a few issues with couple of the blades coming loose but i just put a little dab of crazy glue in behind the blades and never had a problem after .. put down a bull moose and a whitey buck .. nothing but carnage on the moose .. the whitey never went far either .. but I will be back to slick tricks again this year ..

[H380]

Originally Posted by brendan's dad

I know I might get the gears for this but I was having similar results as u described. I lined up my "cock vane" with 1 of the 4 blades and the problem was eliminated. I didn't even expect it to work but it did, and I am hitting with my FP's out to 50 yards

Do the same with mine , good flight and accurate .

[chironomidkraut]

i'll will give that a go and see what happens, i noticed one of the vanes lines up with the blades but not the cock vane, would that matter?

[Buckhunter,1]

Originally Posted by chironomidkraut

thanks, so i guess any back angle of the rear blade beyond 90 degrees is illegal then!
is that top pic of the qad exodus? heard good things about the full blade model

the full blade model is wicked tuff , i missed my target once and hit solid concert and my arrow broke but the exodus stuck in cement and not a nick or bend and the blades where still sharp, last weekened i also shot a whitetail doe with the full exodus at 40 yards my shot was a little high and she was quarting towards me but i got a full pass threw and my broad head was perfect , the start of the blood trail wasent the best but i think thats just because i hot her high but with in 20 yards there was a blood trail that any one could follow