Reloading anmounts

[gldenhwk]

Just curious, how many reloads should I expect from 300wm brass that is running about 90% of max loads?

[7mmremmag]

It really depends on the brand and are you full length resizing or just neck sizing?

[elkhunter11]

That depends on how much you work the cases, whether you anneal the necks, and the quality of the cases.

[Dick284]

Set your dies to the rifles headspace, anneal every third loading.

You'll probably get over 6 loadings per case most likely some could go upwards of 10 loadings.

I'm over 12 loadings on some 25'06 brass that I've never annealed, but only neck size. I was 8-10 on some 270WSM brass when I had that rifle. I've forgot how many loads I have on some .308 brass for my Palma rifle.(15+)

It's albout how you set your dies up, then how you work harden your brass.

[Skytop B]

I have gone 12+ with Norma Brass, neck sizing only. 75 grains of H1000 and a 210 VLD, min spec chamber and necks annealed every 4-5 firings.

I wouldn't go over 3 if you are full length sizing in a factory oversized chamber...

[gldenhwk]

Thanks guys. I'm full sizing at the moment as these have the potential to be used in more than 1 rifle. They are a mix of head stamps, mostly FC and win. I was thinking it was going to be in 3-4 max for what I'm loading